Comm-Tec UP-51TS User manual
UP-51TS
Compact Scaler Switcher (with PoH)
All Rights Reserved
Version: 2016V1.3
User Manual
Compact Scaler Switcher
Comm-Tec S.r.l. 2 www.comm-tec.it
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till December 2016. In the constant
effort to improve our product, we reserve the right to make functions or parameters
changes without notice or obligation. Please refer to the dealers for the latest details.
All product function is valid till 2016-12-7.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Compact Scaler Switcher
Comm-Tec S.r.l. 3 www.comm-tec.it
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Compact Scaler Switcher
Comm-Tec S.r.l. 4 www.comm-tec.it
Contents
1. Introduction .................................................................................................................6
1.1 Introduction to the Scaler Switcher ....................................................................6
1.2 Features ............................................................................................................6
1.3 Package List ......................................................................................................7
2. Panel Description........................................................................................................8
2.1 Front Panel ........................................................................................................8
2.2 Rear Panel.........................................................................................................9
3. System Connection...................................................................................................11
3.1 Usage Precautions ..........................................................................................11
3.2 System Diagram ..............................................................................................11
3.3 Connection Procedure.....................................................................................11
3.4 Connection of Microphone...............................................................................12
3.5 Application .......................................................................................................14
4. System Operations ...................................................................................................15
4.1 Front Panel Buttons.........................................................................................15
4.1.1 Manual-Switching ..................................................................................15
4.1.2 Auto-Switching.......................................................................................15
4.1.3 Volume Adjusting ...................................................................................16
4.2 IR Control ........................................................................................................16
4.2.1 IR Remote .............................................................................................16
4.2.2 Control far-end device from local...........................................................17
4.2.3 Control local device from remote ...........................................................17
4.2.4 CEC Function ........................................................................................18
4.3 RS232 Control .................................................................................................19
4.3.1 Installation/uninstallation of RS232 Control Software ............................19
4.3.2 Basic Settings........................................................................................19
4.3.3 RS232 Communication Commands ......................................................21
4.3.4 Control Compact Scaler Switcher or 3rd Party Device from Local.........29
4.3.5 Control Compact Scaler Switcher or 3rd party device form Remote......29
4.4 OSD Menu Control ..........................................................................................30
4.4.1 OPTIONS ..............................................................................................31
Compact Scaler Switcher
Comm-Tec S.r.l. 5 www.comm-tec.it
4.4.2 PICTURE...............................................................................................32
4.4.3 SETUP ..................................................................................................33
4.5 Web-based GUI Control ..................................................................................34
4.5.1 Control Menu .........................................................................................35
4.5.2 Configuration Menu ...............................................................................36
4.5.3 RS232 Control Menu .............................................................................38
4.5.4 Password Menu.....................................................................................39
4.5.5 Web-based GUI Update ........................................................................39
5. Specification .............................................................................................................40
6. Panel Drawing ..........................................................................................................41
7. Troubleshooting & Maintenance ...............................................................................42
8. After-sales Service....................................................................................................43
Compact Scaler Switcher
Comm-Tec S.r.l. 6 www.comm-tec.it
1. Introduction
1.1 Introduction to the Scaler Switcher
The Scaler Switcher is a compact mini scaler switcher with 5 video inputs (1
HDMI/MHL, 2 HDMI, 1 DP, and 1 VGA) and 3 audio inputs (1 DP external audio, 1 VGA
auxiliary audio, 1 MIC audio). The VGA input supports VGA, YPbPr and C-video, so the
scaler switcher is compliant with multiple video signals.
The Scaler Switcher scales & switches any video signal to HDMI output and HDBaseT
output (supports PoH and connects to an HDBaseT Receiver, up to a maximum
transmission distance of 70 meters.
With 1 IR IN, 1 IR OUT & 1 RS232, the IR & RS232 signals can be transmitted bi-
directionally between the Scaler Switcher and the HDBaseT Receiver.
In addition, The Scaler Switcher can be controlled via front panel buttons, IR remote,
RS232 commands and web-based GUI.
1.2 Features
▪Compliant with HDMI1.4& HDCP2.2.
▪Supports CEC, with commands to enable/disable this function.
▪Supports video source auto-switching function.
▪Bi-directional IR & RS232 control.
▪Output resolutions selectable to assure preferred output, and supports various
output resolutions, such as 1920x1200, 1920x1080, 1600x1200, 1600x900,
1360x768, 1280x800, 1280x720, 1024x768.
▪VGA video supports C-video, YPbPr and VGA.
▪48V phantom power to support condenser microphone.
▪MIC port supports balance/unbalance signal, suppress the external noise effectively.
▪3-level MIC input, supports condenser microphone, dynamic microphone and
wireless microphone.
▪Controllable via buttons, IR remote, RS232 & Web-based GUI.
▪Powerful OSD function.
▪Supports online software upgrading.
Compact Scaler Switcher
Comm-Tec S.r.l. 7 www.comm-tec.it
1.3 Package List
Part 1
▪1 x Compact Scaler Switcher
▪2 x Mounting Ears with 4 Screws
▪4 x Plastic Cushions
▪1 x Power Adapter (24VDC,2.71A)
▪1 x IR Remote
▪1 x VGA Converting Cable (VGA to YPbPr)
▪2 x 3-Pin Phoenix Connectors
▪1 x 5-Pin Phoenix Connector
▪1 x IR Emitter
▪1 x IR Receiver (with carrier wave)
Part 2
▪1 x HDBaseT Receiver
▪2 x Mounting Ears with 4 Screws
▪4 x Plastic Cushions
▪1 x RS232 Cable (3-Pin to DB9)
▪1 x User Manual
Note
：
Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
Compact Scaler Switcher
Comm-Tec S.r.l. 8 www.comm-tec.it
2. Panel Description
2.1 Front Panel
①Built-in IR Receiver
②Power indicator
▪Off when there is no power to the device.
▪Red when the device is in standby mode.
▪Green when the device is powered on.
③1-HDMI/MHL input Selector & Activity LED; Left key
④2-HDMI input Selector & Activity LED; Right key
⑤3-HDMI input Selector & Activity LED; Up key
⑥4-DisplayPort input Selector & Activity LED; Down key
⑦5-VGA input Selector Activity LED; Enter key
⑧Auto-Switching Mode Selector& Activity LED; OSD menu button
▪Press this button to enter or exit Auto-switching mode, in this mode, select input
source via front panel button is not available, but RS232 command and IR remote
are able to switch mode. The auto LED turn green and keep on.
Note: When you set any VGA port to C-video or YPbPr in Manual-switching mode, the
system will not be able to enter Auto-switching mode.
▪Long-press this button more than 2 seconds to enter OSD menu, and then use ③~
⑥direction keys, ⑦confirm key to control.
⑨Volume Knob
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
SOURCE
MIC
VOLUME
IR 1-HDMI/MHL 5-VGA4-DP
3-HDMI
2-HDMI AUTO
ENTER MENU/2s
12345678 9
Compact Scaler Switcher
Comm-Tec S.r.l. 9 www.comm-tec.it
2.2 Rear Panel
①INPUTS
▪Video input ports: 1 HDMI/MHL input, 2 HDMI inputs, 1 DP and 1 VGA
▪Audio input ports: 1 DP external audio input and 1 VGA auxiliary audio input.
②OUTPUTS
▪HDMI output: HDMI video output port
▪HDBaseT output: Support PoH. Connect with an HDBaseT Receiver to transmit
AV signal or IR/RS232 control signal.
HDBaseT output boasts green and yellow indicator. The green indicator will blink
when power. If connect an HDBaseT receiver to this output successfully, the yellow
indicator will light up, and the green indicator will keeps blinking.
③MIC INPUT
▪MIC audio port: connect to Microphone.
▪Dial switch: including 3 level
48V phantom power mode (connect with condenser microphone);
MIC mode (connect with dynamic microphone);
LINE mode (connect with wireless microphone or line audio).
④CONTROL
▪RES RESET: press this button to reset the output resolution to 1280×720p, or
activate HDMI and HDBT outputs when they are closed.
▪IR IN: connect with IR receiver (with carrier wave only) to receive IR signal to
control far-end device which was connected to HDBaseT Receiver via
HDBaseT output port.
▪IR OUT: connect with IR emitter to control local source devices from remote.
▪IR EYE: connect with IR receiver (with carrier wave only) to receive IR signal
send by IR remote to control this Scaler Switcher.
▪FIRMWARE: Type-A USB port for updating system firmware or loading
DC 24V48V LINE IR EYEIR IN IR OUT
MIC INPUT
MIC
FIRMWARE AUDIO OUT
L R
RES RESET RS232
Tx Rx
INPUTS OUTPUTS
3-HDMI
2-HDMI1-HDMI / MHL 4-DP 5-VGA HDMI HDBT
CONTROL
12
3456
Compact Scaler Switcher
Comm-Tec S.r.l. 10 www.comm-tec.it
customized EDID data.
▪RS232: Serial port, 3-pin phoenix connector, connect with a control device
(such as PC) to control the Scaler Switcher or other devices connected with
HDBaseT Receiver.
▪TCP/IP: Ethernet port, connect with PC to control the Scaler Switcher via Web-
based GUI.
⑤AUDIO OUTPUT
▪Audio output port, the audio comes from the input audio corresponding to the
selected video source and is mixed with MIC audio.
⑥DC 24V
▪Power port, connect with DC 24V power adapter.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Table of contents
Other Comm-Tec Switch manuals
Comm-Tec
Comm-Tec UP-1200 User manual
Comm-Tec
Comm-Tec UP-41TS User manual
Comm-Tec
Comm-Tec UP-42T-CODEC User manual
Comm-Tec
Comm-Tec MTX0808DA User manual
Comm-Tec
Comm-Tec DaisyNET-TX User manual
Comm-Tec
Comm-Tec UP-1080p User manual
Comm-Tec
Comm-Tec UP-82TS User manual
Comm-Tec
Comm-Tec SW-81VA-2 User manual
