3.1 : The steps to enter the set interface as follows
(1) Under default configuration, power on the device and wait 90 seconds
untill the device to start.
(2) Connect the device’s LAN port with the computer by a network cable.
(3) . Input 192.168.10.1 in the web browser to enter the set interface
(4)
Password Add
(5) If read normally, you need to modify the wireless SSID and
password. Enter the menu bar on the left, Network Management -
Modify the wireless settings, click on the settings after modifying.
Note:
1. If the SIM card is not read: (1) First check if the SIM card is
inserted in the direction of the mark (2) Check if the SIM card has
a PIN lock. If there is a lock, please unlock the SIM card with the
mobile phone first.
2. Individual operators may prompt Unkown, but the network
access information and signals are normal. This do not affect the
Internet access.
3. Replacing and plugging the SIM card requires restarting the
device.
4. If your card needs to manually set the APN account, please
refer to the manual Router Set 4G mode.
3Other Mode Internet Settings
