Comelit HFX-700M KIT Safety guide

HANDS-FREE EXPANDABLE

VIDEO INTERCOM SYSTEM

OWNER S MANUAL

INSTALLATION AND OPERATION

HFX-700M KIT

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

WARNING

FCC CLASS B NOTICE

HFX-700M KIT VIDEO INTERCOM SYSTEM

1.HFX-700M KIT Introduction

2.HFX-700M KIT Parts Identification

2.1.Main Monitor

2.2.Door Camera

2.3.HFX-700M KIT Packaging

3.HFX-700M KIT Installation

3.1. Positioning the devices

3.2. Installation

3.3. Door Release Options

4. HFX-700M KIT Test after installation

5. HFX-700M KIT Operation

XPANSION OPTIONS

System Layout

Wiring Diagram

1. Expansion video monitor (EX-700H)

1.1.EX-700H Identification

1.2.EX-700H Installation

1.3.EX-700H Operation

1.3.1.Broadcast and intercom function

2. Expansion non-video monitor (EX-700A)

2.1.EX-700A Identification

2.2.EX-700A Installation

2.3.EX-700A Operation

2.3.1.Broadcast and intercom function

3.Door camera (EX-700D)

3.1.EX-700D Identification

3.2.EX-700D Installation

3.3.EX-700D Operation

TECHNICAL SPECIFICATIONS

TROUBLE SHOOTING

SERVICE AND WARRANTY

.1. Basic function test

4.2. Door release test(optional)

5.1.Visitor Calls from Door Camera

5.2.Audio and Video monitoring

5.3.

EUnilateral voice mode control

IMPORTANT SAFETY INSTRUCTIONS

WARING: TO REDUCE THERISK OF FIRE ORELECTRIC

SHOCK, DO NOT EXPOSETHE MONITOR OR POWER

ADAPTER TO WATER ORMOISTURE.

Read Instructions -All the safety and operating instructions should be

read before operating this equipment. These instructions should be

retained for future reference.

Heed Warnings - All warnings on the equipment and in the operating

instructions should be adhered to. All instructions regarding care and

operation of this equipment should be followed.

Power Sources - Equipment should only be connected to the power

supply specified in the operating instructions or as marked on the

equipment.

Power Cord Protection-Keep cable cords and plugs clear off other

objects, particularly at the point where they exit the equipment.

Cleaning - Clean the equipment by wiping with a soft cloth (do not use

any abrasive agents or water).

Non-use Periods - Power cords should be unplugged from the outlet

when left unused for a long period of time.

Object and Liquid Entry - Take care not to drop objects or liquids on

any part of the equipment.

Damage Requiring Service -The unit should be serviced by a qualified

service personnel when:

- The power supply cord or the plug has been damaged or

- Objects have fallen, or liquid has been spilled onto the equipment or

- The equipment has been exposed to rain or

- The equipment does not appear to operate normally or exhibits

a marked change in performance or

- The equipment has been dropped and/or the enclosure has been

damaged.

Servicing - Do not attempt to service the appliance beyond that

described in the operating instructions. All other servicing should be

referred to as Qualified Distributor's Service Personnel.

WARNING

WARNING: TO REDUCE THE RISK OF FIREOR ELECTRIC

SHOCK, DO NOT EXPOSE THE MONITOR OR POWER

ADAPTER TO WATER OR MOISTURE.

CAUTION: DO NOT OPEN. RISK OF ELECTRICAL SHOCK.

CAUTION! TO REDUCE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER OR BACK, NO USER SERVICEABLE PARTS

INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF TWO SYMBOLS

The lighting flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute risk of

electrical shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

Monitor is designed for indoor use only. Do not install outdoors.

Keep the equipment dry. If water should get in,wipe off immediately.

Water contains minerals that can erode electronic circuits.

Intercom system is not operational during a power failure .

Intercom system may be affected by radio frequency interference or

EMI(electrical magnetic interference) in areas where broadcasting

station antennas are close by.

Keep all wiring at least 1 foot away from fluorescent lighting, dimmer

switches and AC power.

OTHER WARNINGS

FCC CLASS B NOTICE

NOTE:

This equipment has been Certified and found to comply with the limits

regulated by FCC,and CE. Therefore, it is designed to provide reasonable

protection against interference and will not cause interference with other

appliance usage. However, it is imperative that the user follows this

manuals guidelines to avoid improper usage which may result in damage

to the unit, electrical shock, and fire hazard or injury. In order to improve

the feature functions and quality of the product, the specifications are

subject to change without notice from time to time.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference with

radio communications. However, there is no guarantee that interference

will not occur in a particular installaition. If this equipment does cause

harmful interference to radio or televis ion reception, which can be

determined by turning the equipment off and on, the user is encouraged to

try to connect the interference by one or more of the following measures:

- Reorient or relocate the monitor unit

- Increase the separation between the monitor and camera

- Connect the equipment on a separate outlet

- Consult the dealer or an experienced radio or television technician

HFX-700M KIT VIDEO INTERCOM SYSTEM

1.Introduction

Thank you for purchasing the Hands-Free expandable Video Intercom

System HFX-700M.

This intercom system uses 2-wire installation, and operation is simple.

Allows you to identify and communicate with callers at the door, from the

security and convenience of any room in your home or office. Visitors

activate the system by pressing a call button on the outdoor camera,

which sounds a doorbell chime as well as turning on the inside video

monitor. A two-way intercom then lets you speak with visitors after first

visually identifying them.

It consists of a monitor station and an outdoor doorbell/camera unit.

This unit is capable of expanding up to a total of 4 indoor monitors and

2 door cameras. Expansion monitor can choose video(EX-700H) or

non-video(EX-700A).

For more information regarding the complete line of our products,

please visit www.comelitusa.com

2.HFX-700M KIT Parts Identification

2.1. Main Monitor

8910 117

178mm

(7.0 )

36mm

(1.42 ) 118mm

(4.65 )

1. 3.5" Color TFT Screen

2. Speaker

3. In use LED

4. Monitor LED

5. Intercom LED

6. Speaking out LED

7. Microphone

8. Cut-off button( )

9. Intercom button( )

10. Monitoring button( )

11. Door release button( )

12. Power switch

13. Brightness tuner( )

14. Sharpness tuner( )

15. Bell Volume tuner( )

16. Speaker Volume tuner( )

Main monitor

HFX-700M Main monitor identification:

Wiring terminals

PT1

PT2

DG1

DG2

OUT+

OUT-

DR2

DR1

POWER

<+>

<->

136mm

(5.35 )"

89mm

(3.5 )"

8.4mm(0.33 )"

Wall mount bracket

PT1

PT2

DG1

DG2

OUT+

OUT-

DR2

DR1

POWER

<+>

<->

Main monitor wall mount bracket

Magnetic switch sensor connection: for door status detection

External chime or light indicator connection: for optional third party device

Expansion monitor connection: for more indoor monitor expansion

(w/polarity)

Door camera connection(2): to the 2nd door camera terminals(no polarity)

Door camera connection(1): to the 1st door camera terminals(no polarity)

Power adapter connection

2.2. Door Camera

130mm

(5.12 )"

36mm

(1.42 )"

1. White LED Illumination

2. 1/3" Color CCD

3. Microphone

4. Speaker

5. Call button

6. Screw cover

7. CCD view angle knob

(-6 degrees, 0 degrees, 8 degrees, 16 degrees)

8. Jumper 2 (enable/disable light senor)

9. Jumper 1 (dry contact or current output selection)

10. Wire to door strike

11. Wire to main Monitor

HFX-700M Door Camera identification:

98mm

(3.86 )"

JP1

JP2

12 3 4

910 11

Door camera

2.3.HFX-700M KIT Packaging

X1X1

Main monitor

Wall mount bracket

PT1

PT2

DG1

DG2

OUT+

OUT-

DR2

DR1

POWER

<+>

<->

Manual

Adaptor

X1 X4

White wall

mount screws

HANDS-FREE EXPANDABLE

VIDEO INTERCOM SYSTEM

OWNER S MANUAL

INSTALLATION AND OPERATION

Screws wrench

Flat head screws

Narrow space may cause feedback

echo on speakerphone function.

Direct sunshine can cause blurry picture

on monitor.

View Angle:Proper height:

Narrow space may cause feedback

echo on speakerphone function.

Too close to high power appliance may

cause audio/video interference.

The proper height of monitor or door camera is 160~170cm(63"~67")

from the ground. This may vary on each installation. View range should

be actively tested before complete.

Viewing window of door camera is about 70cm up-n-down, and 100cm

left-n-right.

3. HFX-700M KIT Installation

3.1. Positioning the devices

NOTE 1: Wiring distance

NOTE 2: the installation environment

170cm

(66.9 )"

50cm(19.7 )"50cm(19.7 )"

70cm

(27.6 )"100cm

(39.3 )"

Main monitor

165cm

(64.9 )"

From main monitor to door camera:

Maximum of 50M with AWG22( 0.65mm) normal 2-wire parallel wires.

Maximum of 100M with AWG18( 1.0mm) normal 2-wrie parallel wires.

From monitor to monitor (every section):

Maximum of 100M with AWG22( 0.65mm) normal 2-wrie parallel wires.

Door camera

Other manuals for HFX-700M KIT

This manual suits for next models

Table of contents

Other Comelit Intercom System manuals

Comelit

Comelit KVS2001KP User manual

Comelit

Comelit 6722W User manual

Comelit

Comelit Bravo Series Instruction Manual

Comelit

Comelit KAE0061 User manual

Comelit

Comelit People PL8461M User manual

Comelit

Comelit Ciao CA5100A User manual

Comelit

Comelit 8472MC User manual

Comelit

Comelit 6602W User manual

Comelit

Comelit Bravo Series Instruction Manual

Comelit

Comelit 6741W User manual

Comelit

Comelit 1998NA User manual

Comelit

Comelit BK/03A Quick start guide

Comelit

Comelit LS8701 User manual

Comelit

Comelit Simplebus Color 4888C Instruction Manual

Comelit

Comelit PLANUX Series User manual

Comelit

Comelit Venice 6814W User manual

Comelit

Comelit Ciao CA2100A User manual

Comelit

Comelit Architectus Pro SBTop Series User manual

Comelit

Comelit MT SB2 01 User manual

Comelit

Comelit 8171I User manual

Comelit

Comelit 8274 User manual

Comelit

Comelit 8171IMC User manual

Comelit

Comelit 3602 User manual

Comelit

Comelit Simplebus1 Ultra UT1020 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual