Cognex DataMan 50 User manual

DataMan®50

Quick Reference Guide

2021 November 25

Revision: 6.1.11.1

Precautions

To reduce the risk of injury or equipment damage, observe the following precautions

when you install the Cognex product:

lRoute cables and wires away from high-current wiring or high-voltage

power sources to reduce the risk of damage or malfunction from the

following causes: over-voltage, line noise, electrostatic discharge (ESD),

power surges, or other irregularities in the power supply.

lChanges or modifications not expressly approved by the party responsible

for regulatory compliance could void the user’s authority to operate the

equipment.

lEnsure that the cable bend radius begins at least six inches from the

connector. Cable shielding can be degraded or cables can be damaged or

wear out faster if a service loop or bend radius is tighter than 10X the cable

diameter.

lThisdevice should be used in accordance with the instructions in this

manual.

lAll specifications are for reference purposes only and can change without

notice.

lThis product is intended for industrial use in automated manufacturing or

similar applications.

lThe safety of any system incorporating this product is the responsibility of

the assembler of the system.

lThisproduct does not contain user-serviceable parts. Do not make

electrical or mechanical modifications to product components.

Unauthorized modifications can void your warranty.

Symbols

The following symbols indicate safety precautions and supplemental information:

WARNING:This symbol indicates a hazard that could cause death, serious personal injury or electrical

shock.

CAUTION:This symbol indicates a hazard that could result in property damage.

Note: This symbol indicates additional information about a subject.

Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.

Product Overview

1 Status LEDs:

- YELLOW

- GREEN

- RED

2 Cable

3Internal illumination

43-position M12 lens

5 LED aimer

6 Mounting holes (M3 x 3.5 mm)

1 Remove side cover to access square nut (M3)

2 Yellow arrow indicates selected focus position

3 Hidden square nut as an alternative mounting option

DataMan 50 Accessories

CABLES

USB Cable, 1.5 m (DM100-USB-000),

USB Cable, 3 m (DM100-USB-030)

USB and Flying Leads I/O Cable, 2.0 m (DM-USBIO-00)

RS-232 and Flying Leads I/O Cable, 2.5 m (DM-RS232IO-00)

RS-232 Cable, 1.5 m (DM100-RS232-000),

Extension Cable, 5 m (DM100-EXTCBL-000)

Flying Leads Connection Cable, 5 m (DM50-PWRIO-05)

RS-232/USB adapter connector (DM100-PATCH-000)

LENS COVERS

Clear Front Cover (DM-50-CLCOV)

ESD-safe Front Cover (DM50-CLCOV-ESD)

OTHER

Power Supply, 6 V (DM100-PWR-000)

Pivot Mounting Bracket (DM100-PIVOTM-00)

Universal Mounting Bracket (DM50-UBRK-000)

Control Box (DM-CTRLBOX-00)

Dimensions

Field of View and Reading Distances

Focus position Distances in mm/2D min. code Distances in mm/1D min. code

45 mm 33-51 6 MIL 34-51 4 MIL

31-57 8 MIL 30-56 6 MIL

27-60 10 MIL 37-66 10 MIL

25-61 12 MIL

70 mm 44-74 6 MIL 52-73 4 MIL

42-78 8 MIL 45-83 6 MIL

39-80 10 MIL 33-89 10 MIL

34-89 12 MIL

110 mm 58-121 10 MIL 66-122 6 MIL

54-133 12 MIL 50-141 10 MIL

58-168 15 MIL

Connecting the Reader

Perform the following steps:

1. Connect the breakout cable.

2. Connect the reader to the PC.

For information on the pinout and the wire colors, see section Connections, Optics

and Lighting in the DataMan 50 Reference Manual.

Other manuals for DataMan 50

Table of contents

Other Cognex Barcode Reader manuals

Cognex

Cognex DataMan 300 Series User manual

Cognex

Cognex DataMan 475 User manual

Cognex

Cognex DataMan 9500 User manual

Cognex

Cognex DM503 User manual

Cognex

Cognex DataMan Administrator guide

Cognex

Cognex DataMan 8072 Verifier User manual

Cognex

Cognex DataMan 260 Series User manual

Cognex

Cognex DataMan 302L User manual

Cognex

Cognex DataMan 8000 Series User manual

Cognex

Cognex DataMan 200 User manual

Cognex

Cognex DataMan 300 Series User manual

Cognex

Cognex DataMan 60 Series User manual

Cognex

Cognex DataMan 8700 User manual

Cognex

Cognex DataMan DM474 User manual

Cognex

Cognex DataMan 50 User manual

Cognex

Cognex DataMan 100 User manual

Cognex

Cognex DM260Q User manual

Cognex

Cognex DataMan 300 Series User manual

Cognex

Cognex DATAMAN 500 User manual

Cognex

Cognex DataMan 370 Series Operating instructions

Cognex

Cognex DataMan 8700 User manual

Cognex

Cognex DataMan 280 Series User manual

Cognex

Cognex DataMan 260 Series User manual

Cognex

Cognex DataMan 8050 User manual

Cognex DataMan 50 User manual

Popular Barcode Reader manuals by other brands