CONNECTING YOUR IPAD
1. Your CODi Bluetooth Keyboard Case will have a partial charge, when first removed from it’s packaging.
2. Prior to pairing with your iPad, charge the Bluetooth Keyboard Case, with the included micro-USB cable, until it has a full battery.
3. When it’s fully charged, a solid green light will show next to “Batt”, on the keyboard.
4. Check to make sure your iPad’s IOS is updated to the latest version
5. Enable Bluetooth on your iPad (Settings → Bluetooth → “On”)
6. Turn on the keyboard
7. Begin pairing with your iPad by holding the function key (Fn) and pressing the “C” key, with the Bluetooth icon on it.
8. A blue LED light will begin flashing, next to “PAIR”
9. In your iPad Bluetooth Settings, “Bluetooth Keyboard” will appear under “Other Devices”
10. Choose “Bluetooth Keyboard”
11. Pairing will complete, and you will see “Bluetooth Keyboard” under “My Devices”, with “Connected”, next to it.
CODi Part# C30708504 / iPad Air 10.5” & iPad Pro 10.5”
Bluetooth Keyboard Case Manual
INSERTING/REMOVING YOUR IPAD
To insert your iPad into the case, start
with the folio’s keyboard facing you.
Next, with your iPad in landscape mode,
with the Home button on the right, set
the bottom edge of the iPad in the case.
Apply light pressure to make sure the
iPad is firmly settled at the bottom of
the case.
Next, snap the top half of the iPad in
the case. Apply light pressure to each
corner, to be sure the iPad has snapped
firmly into the case.
Note that your iPad case comes with
precisely located magnets that activate
your iPad’s sleep/wake mode feature,
which will help you preserve battery life.
Simply open or close your case, to wake,
or put your iPad to sleep.
To remove your iPad, grab the top of
the case cover, near the middle, apply
light pressure to the back of the iPad.
Carefully pull the iPad out of the case,
by grabbing the exposed edge(s) of the
iPad.
1.
3. 4.
2.
1. Make sure your iPad and keyboard case are both charged
2. Check to make sure your iPad’s IOS is updated to the latest version.
3. If you’re iPad goes to sleep, and the keyboard is “not connected”, press any key, and it will reconnect.
4. In the iPad’s Bluetooth settings, make sure any previous instance of CODi’s Keyboard is removed (“Forget this Device”)
5. Turn off the keyboard
6. Turn off Bluetooth on your iPad
7. Turn on Bluetooth on your iPad
8. Turn on the keyboard
9. Attempt to Pair by holding the function key (Fn) and pressing the “C” key, with the Bluetooth icon on it. (blue indicator light will flash)
10. If the above steps do not resolve the issue, restart your iPad by holdng down the home, and power button simultaneously, until it restarts. Let go of
both buttons when the Apple logo apprears.
11.
If you still experience the same issue, please contact CODi Customer Support at custsuppor[email protected]TROUBLESHOOTING
CODi LLC // 120 Commons Court // Chadds Ford, PA 19317
+1 800.263.4462 // CODiWorldwide.com
