Code CR1000 User manual

C005905_01_CR1000_User_Manual

C005905_01_CR1000_UserManual

User Manual

Code Reader 1000™

Manual Version 01

Release Date: January 2011

C005905_01_CR1000_User_Manual

Statement of Agency Compliance

Code voids product warranty if the hard case has been opened or tampered with in any way.

In addition, a CB Test Certicate has been issued by the National Certication Board (NCB)

indicating CR1000 meets all safety and quality standards in accordance to IEC 60950-1:2001, First

Edition.

The Code Reader 1000 has been tested for compliance with FCC regulations and was found to be

compliant with all applicable FCC Rules and Regulations.

IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this device must not

be co-located or operate in conjunction with any other antenna or transmitter.

CAUTION: Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

The Code Reader 1000 has been tested for compliance to CE standards and guidelines and was found

to conform to applicable CE standards, specically the EMC requirements EN 55024, ESD EN 61000-4-

2, Radiated RF Immunity EN 61000-4-3, ENV 50204, EFT EN 61000-4-4, Conducted RF Immunity EN

61000-4-6, EN 55022, Class B Radiated Emissions, and Class B Conducted Emissions.

C005905_01_CR1000_User_Manual

Code Reader 1000 User Manual

The software described in this manual may only be used in accordance with the terms of its license agreement.

No part of this publication may be reproduced in any form or by any means without written permission from Code

Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and

retrieval systems.

NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a

commitment on the part of Code Corporation. Code Corporation does not warrant that it is accurate, complete or error

free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make

changes in specications and other information contained in this document without prior notice, and the reader should in

all cases consult Code Corporation to determine whether any such changes have been made. Code Corporation shall

not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages

resulting from the furnishing, performance, or use of this material. Code Corporation does not assume any product liability

arising out of or in connection with the application or use of any product or application described herein.

NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual property rights

of Code Corporation. Any use of hardware, software and/or technology of Code Corporation is governed by its own

agreement.

The following are trademarks or registered trademarks of Code Corporation:

CodeXML® , Maker, QuickMaker, CodeXML® Maker, CodeXML® Maker Pro, CodeXML® Router, CodeXML® Client

SDK, CodeXML® Filter, HyperPage, CodeTrack, GoCard, GoWeb, ShortCode, GoCode®, Code Router, QuickConnect

Codes, Rule Runner®, Cortex®

All other product names mentioned in this manual may be trademarks of their respective companies and are hereby

acknowledged.

The software and/or products of Code Corporation include inventions that are patented or that are the subject of patents

pending. U.S. Patents: 6997387, 6957769, 7428981, 6619547, 6736320, 7392933, 7014113, 7240831, 7353999,

7519239, 7204417, 6942152, 7070091, 7097099, 7621453

The Code Reader software uses the Mozilla SpiderMonkey JavaScript engine, which is distributed under the terms of the

Mozilla Public License Version 1.1.

The Code Reader software is based in part on the work of the Independent JPEG Group.

Code Corporation, 14870 South Pony Express Road, Suite 200, Bluffdale, UT 84065

www.codecorp.com

C005905_01_CR1000_User_Manual

Table of Contents

1.0 - Unpacking.....................................................................................................................................................1

2.0 - Powering the Reader On/Off .......................................................................................................................1

3.0 - Detaching a Cable ........................................................................................................................................1

4.0 - Reading Range .............................................................................................................................................2

5.0 - Targeting and Optimal Reading Distance ..................................................................................................2

6.0 - Reader Feedback..........................................................................................................................................3

7.0 - Symbologies Defaulted On..........................................................................................................................4

8.0 - Symbologies Defaulted Off .........................................................................................................................4

9.0 - Reader ID & Firmware Version....................................................................................................................5

10.0 - Hole Mounting Pattern...............................................................................................................................6

11.0 - CR1000 Overall Dimensions......................................................................................................................6

12.0 - Maintenance................................................................................................................................................7

13.0 - Warranty......................................................................................................................................................7

C005905_01_CR1000_User_Manual

2.0 - Powering On/Off the Reader

1.0 - Unpacking

Remove the CR1000 from its packing and inspect it for damage. If the reader was damaged during shipping, please call

Code at (801) 495-2200.

The CR1000 is shipped with one of the following cables attached:

6’ USB

Straight Cable

8’ RS232 Coiled Cable

w/ Power Supply

For USB: to power up the reader, simply plug the USB cable provided into the reader and USB port on the host device.

After several seconds, the unit will beep twice, the LED will turn off and the CR1000 is ready for use.

For RS232: to power up the reader, simply plug the RS232 cable provided into the reader, plug the Power Supply into

the AC outlet, plug the power supply cord into the barrel jack on the cable, and lastly connect the cable to the appropriate

serial port on the host device.

After several seconds, the unit will beep twice, the LED will turn off and the CR1000 is ready for use.

To detach a cable, press a paper clip into the hole on the back of the CR1000, and gently pull the cable from the reader.

3.0 - Detaching a Cable

C005905_01_CR1000_User_Manual

4.0 - Reading Ranges

CR1000 Performance

Test Code Min Inches (mm) Max Inches (mm)

3 mil Code 39 3.9” (100 mm) 5.0” (125 mm)

7.5 mil Code 39 2.2” (55 mm) 8.0” (205 mm)

13 mil UPC 2.0” (50 mm) 10.8” (275 mm)

4.2 mil Data Matrix 3.7” (95 mm) 4.7” (120 mm)

5 mil Data Matrix 3.7” (95 mm) 5.5” (140 mm)

6.3 mil Data Matrix 3.1” (80 mm) 6.3” (160 mm)

10 mil Data Matrix 1.6” (40 mm) 7.9” (200 mm)

20.8 mil Data Matrix 1.6” (40 mm) 12.2” (310 mm)

Note: working ranges are a combinaon of both the wide and high density elds. All samples were high quality codes

and were read along a physical center line at a 10° angle. Default AGC sengs were used. Accuracy= +/- 10%.

5.0 - Targeting & Reading Distance

The blue bars are used for aiming, center the bars in the center of a bar code and press the LED button to scan. The

optimal reading distance is approximately 4.0” (10 cm).

C005905_01_CR1000_User_Manual

Scenario Top LED Button

CR1000

Successfully

Powers Up

CR1000

Successfully

Enumerates with

Host (via cable)

Attempting to

Decode

Successful

Decode and Data

Transfer via Cable

Conguration

Code Successfully

Decoded and

Processed

Conguration

Code Successfully

Decoded

but wasn’t

Successfully

Processed

Sound

Green LED lights Up 1 Beep

Once enumerated, the

Green LED turns off

1 Beep

Press the top button

Green LED light is off

Press the top button

the LED does not ash

Press the top button

the LED does not ash

None

Green LED lights Up 1 Beep

2 Beeps

4 Beeps

6.0 - Reader Feedback

C005905_01_CR1000_User_Manual

7.0 - Symbologies Defaulted On

Aztec

Codabar

Code 39

Code 39 Disable Checksum

Code 39 Short Margin

Code 93

Code 128

Code 128 Short Margin

Data Matrix

All GS1 DataBar

Interleaved 2 of 5

MSI Plessy

NEC 2 of 5

PDF417

Telepen

UPC

UPC Short Margin

UPC Extension

8.0 - Symbologies Defaulted Off

Codablock F

Code 11

Code 39 Extended Full ASCII

Composite

Data Matrix Rectangle

Data Matrix Inverse

Interleaved 2 of 5, 2 Digits

Macro PDF417

Maxicode

Matrix 2 of 5

Micro PDF417

OCR

Postal Codes - All Postal Codes

QR Code

The following are symbologies that have a default of ON. To turn symbologies on or off, scan the symbology bar codes

located in the CR1000 Conguration Guide located on our website at http://www.codecorp.com.

The following are symbologies that have a default of OFF. To turn symbologies on or off, scan the symbology bar codes

located in the CR1000 Conguration Guide located on our website at http://www.codecorp.com.

C005905_01_CR1000_User_Manual

9.0 - Reader ID and Firmware Version

To nd out the Reader ID and rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and

read the following code:

You will see a text string indicating your rmware version and CR1000 ID number (see below):

Xap/i - Code Internal ID (not applicable)

VVVV is the application rmware version number

WWWW is the Core rmware version number

XXXX is not applicable

SSSSSSSSSS Reader’s serial number (ten digits)

P is “A” if running rmware is the application

XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new rmware for CR1000 readers. For information on latest rmware versions,

call Code at (801) 495-2200. To upgrade rmware, please visit our website at

http://www.codecorp.com/codesupport.php and follow instructions provided.

Reader ID and Firmware

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

C005905_01_CR1000_User_Manual

10.0 - CR1000 Hole Mounting Pattern

11.0 - CR1000 Overall Dimensions

NOTE 1:

LOCATING HOLES ARE 2MM IN DIAMETER, HOLE DEPTH is 1.5 MM

NOTE 2:

MOUNTING INSERTS ARE M3-.5 INTERNAL THREAD, 3.8MM LENGTH

Other manuals for CR1000

Table of contents

Code CR1000 User manual

Popular Barcode Reader manuals by other brands