Code Alarm Ca 2051 User manual

1ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

PROFESSIONAL

SERIES

Remote Keyless Entry

Installation Guide

ca 2051

2 ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

Before You Begin ......................................................................................3

Wire Connection Guide ...........................................................................4

10 Pin Main Harness .................................................................................5

6 Pin Door Lock Harness..........................................................................8

Additional Ports ........................................................................................ 9

LEDPort.....................................................................................................9

ProgrammingPort......................................................................................9

Set Up & Programming..........................................................................10

Transmitter Programming........................................................................10

Manual Feature Programming.................................................................10

Programming Feature Banks .................................................................. 11

Chirp Delete - User Accessible.............................................................. 11

Feature Descriptions ............................................................................. 12

Transmitter Button Functions .............................................................13

System Layout.........................................................................................14

Table of Contents

3ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

PROFESSIONALINSTALLATION

STRONGLYRECOMMENDED

Installation Precautions:

Roll down window to avoid locking keys in vehicle

during installation

Avoid mounting components or routing wires near

hot surfaces

Avoid mounting components or routing wires near

moving parts

Tape or loom wires under hood for protection and

appearance

Technical Support (800) 421-3209

or go to

http://techservices.codesystems.com

Use a Digital Multi Meter for testing and verifying

circuits. DO NOT USE ATEST LIGHT, OR

"COMPUTER SAFE PROBE" as these can set off air

bags or damage vehicle computers.

Use grommets when routing wires through metal

surfaces

BEFORE YOU BEGIN

4 ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

10 Pin Main Harness

6 Pin Door Lock Harness

1BLUE/GREEN 2ND UNLOCK OUTPUT ( - )

2BLACK/WHITE ILLUMINATED ENTRY OUTPUT ( - )

3WHITE/RED PARKING LIGHT INPUT

4WHITE PARKING LIGHT OUTPUT

5BLACK GROUND

6ORANGE GROUND WHEN ARMED OUTPUT ( - )

7RED BATTERY 12V ( + )

8BROWN/BLACK HORN OUTPUT ( - )

9YELLOW IGNITION INPUT ( + )

10 RED/WHITE TRUNK RELEASE OUTPUT ( - )

10 PIN MAIN

5ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

1 BLUE/GREEN 2NDUNLOCK OUTPUT (- )

This wire provides a ( - ) 200mA output upon the second press of unlock. This

output is used unlock the remaining passenger doors when the system is set up

for driver priority unlock.

10 Pin Main Harness

3 WHITE/RED PARKINGLIGHTINPUT

4 WHITE PARKINGLIGHTOUTPUT

Locate the parking light output wire at the vehicle’s light switch.

Verification: This wire registers positive voltage when the parking lights

are turned on.

Positive switching Parking Lights:

Connect the WHITE/RED wire to a 15 Amp max fused battery source.

Connect the WHITE wire to the parking light output wire.

Negative switching Parking Lights:

Connect the WHITE/RED wire to a good chassis ground.

Connect the WHITE wire to the parking light output wire.

2 BLACK/WHITE ILLUMINATEDENTRYOUTPUT(- )

This wire provides a ( - ) 200mA output for 30 seconds when the system is

disarmed capable of driving relays.

Locate the vehicle’s dome light or pin switch wire.

Verification: This wire will register positive voltage or ground when the

vehicle's dome light is turned ON.

6 ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

8 BROWN/BLACK HORNOUTPUT ( - )

Locate the vehicle’s horn wire.

Verification: This wire will register at positive voltage and register

ground when the horn switch is pressed.

Connect the BROWN/BLACK wire to the vehicle’s horn wire. This is a low current

output, 200mA.

7 RED BATTERY 12V ( + )

Locate 1 of the vehicle’s constant 12 Volt battery wires at the ignition switch.

Verification: This wire will register ( + ) voltage in all positions of the ignition

switch.

Connect the RED wire to the constant 12 Volt battery wire.

NOTE: Remove all fuses until all connections are made.

5 BLACK GROUND

Connect the BLACK wire to a solid chassis ground point using a ring terminal and

self tapping screw (not supplied). Scrape away paint from the grounding point to

ensure a good connection. The recommended grounding point is a metal surface

in the driver’s side kick panel area.

NOTE: Do not ground the BLACK wire with any other vehicle components.

6 ORANGE GROUNDWHENARMEDOUTPUT(-)

This wire will have a continuous ( - ) 500mA output when the system is Armed. This

wire is typically used for controlling a starter interrupt relay, window modules or

additional sensors.

7ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

9 YELLOW IGNITIONINPUT(+)

Locate the vehicle’s ignition wire at the ignition switch.

Verification: This wire registers voltage when the key is turned to the ON (or

RUN) position. The voltage does not drop out when the key is turned to the

START(or CRANK) position.

Connect the YELLOW wire to the vehicle’s Ignition wire.

10 RED/WHITE TRUNKRELEASE OUTPUT( -)

Locate the vehicle’s trunk release wire at the trunk release switch.

Verification: This wire will register either positive voltage or ground when the trunk

release is activated.

This is a low current output, 200mA.

8 ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

6 Pin Door Lock Output Harness

1 BROWN/BLACK UNLOCK SWITCH ( 87A)

2 BLUE/BLACK UNLOCK MOTOR ( 30 )

3 VIOLET/BLACK UNLOCK POLARITY ( 87 )

4 WHITE/BLACK LOCK SWITCH ( 87A )

5 GREEN/BLACK LOCK MOTOR ( 30 )

6 VIOLET LOCK POLARITY ( 87 )

The door lock / unlock outputs are designed to control several different types of

systems which may require additional parts.

3 Wire Ground Switched Door Locks:

Connect the GREEN/BLACK wire to the wire that provides a ground signal from

the factory door lock switch to the factory door lock control relay.

Connect the BLUE/BLACK wire to the wire that provides a ground signal from the

factory door unlock switch to the factory door lock control relay.

Connect the VIOLET and the VIOLET/BLACK wires to a solid chassis ground

point. The WHITE/BLACK and BROWN/BLACK wires are not required for this type

of door lock/unlock system.

3 Wire Positive Switched Door Locks:

Connect the GREEN/BLACK wire to the wire that provides a +12 volt signal from

the factory door lock switch to the factory door lock control relay.

Connect the BLUE/BLACK wire to the wire that provides a +12 volt signal from

the factory door unlock switch to the factory door lock control relay.

Connect the VIOLET and the VIOLET/BLACK wires to a +12 volt battery source.

The WHITE/BLACK and BROWN/BLACK wires are not required for this type of

door lock/unlock system.

9ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

LED Port

The LED included in the kit will serve as a visual indicator of the alarm’s status. It

should be installed in the dash, located where it can be easily seen from outside

the vehicle, yet not be distracting to the driver. Once a location has been

selected, check behind the panel for wire routing access, and to confirm the drill

will not damage any existing components as it passes through the panel. Drill a

1/4" hole, and pass the red and blue wires from the LED through the hole, from

the front of the panel. Firmly press the body of LED into the hole until fully seated.

Additional Ports

Programming / Valet Button Port

Select a mounting location that is within reach of the ignition switch, as this

switch in combination with the ignition switch, will be used to program the certain

features of the system. It is suggested that the switch be mounted to the lower

dash panel in the driver’s area within reach of the driver.

10 ca2051revB.2011AudiovoxElectronicsCorporation.Allrightsreserved.

Manual Feature Programming - Feature Bank 2 & 3

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp (3) three times.

4. Use the valet/override button to advance through each option bank. For

feature programming advance to Feature Bank 2 or 3, which is (4) four or

(5) five chirps.

5. Use the transmitter button to scroll through the selections in each

feature bank, the system will chirp to match the feature number.

6. Press the transmitter button to change the desired feature. The LED will

flash indicating the changed feature.

Set Up & Programming

Transmitter Programming - Feature Bank 1

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp (3) three times.

4. Press 1 button of each transmitter you wish to program.

5. The system will respond with 1 chirp for each accepted transmitter.

6. Pressing the override button at anytime during programming will advance to

the next bank.

NOTE: The system will exit transmitter programming after 15 seconds of inactivity.

NOTE: This system has 1 button programming which programs all channels of the

system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

Defaulting All Features: Pressing the button anytime while in any of the

feature banks will default all features and return you to feature bank 2 - 4 chirps.

NOTE: The system will remain in feature programming mode as long as the

ignition is on, there is no time limit. To exit programming turn the IGNITION OFF.

Other manuals for ca 2051

Table of contents

Other Code Alarm Remote Starter manuals

Code Alarm

Code Alarm Professional Series CA 5050 User manual

Code Alarm

Code Alarm CA 2050 User manual

Code Alarm

Code Alarm Professional ca5054 User manual

Code Alarm

Code Alarm CA-500 User manual

Code Alarm

Code Alarm ca5553sst User manual

Code Alarm

Code Alarm CSM-3 User manual

Code Alarm

Code Alarm CA 421 User manual

Code Alarm

Code Alarm ca6154 Professional Series User manual

Code Alarm

Code Alarm CA 5051 User manual

Code Alarm

Code Alarm ca 1051 User manual

Code Alarm

Code Alarm PC 4400 User manual

Code Alarm

Code Alarm CA-630 User manual

Code Alarm

Code Alarm ca 5152 User manual

Code Alarm

Code Alarm CSM-3 User manual

Code Alarm

Code Alarm PROFESSIONAL SERIES User manual

Code Alarm

Code Alarm CA-430 User manual

Code Alarm

Code Alarm CA 5150 User manual

Code Alarm

Code Alarm ca6554 User manual

Code Alarm

Code Alarm Elite ca6555E User manual

Code Alarm

Code Alarm CA1BTW5 User manual

Code Alarm

Code Alarm CA 440SS User manual

Code Alarm

Code Alarm ca 4552 User manual

Code Alarm

Code Alarm CA 4051 User manual

Code Alarm

Code Alarm PC 7600 User manual

Popular Remote Starter manuals by other brands

AstroStart

AstroStart 803U user manual

Durite

Durite 0-649-20 Leaflet

EINHELL

EINHELL BT-PS 1000 Directions for use

Linear

Linear ACCESS AK-21 Installation and programming instructions

Soundstream

Soundstream TARANTULA RS.2 installation guide

Jaycar Electronics

Jaycar Electronics MB3752 instruction manual

Ultra Start

Ultra Start 72 Series owner's manual

ADS

ADS FLASHLOGIC FLRSVW1 Product guide

Selecta

Selecta JS012 instruction manual

Black Widow Security

Black Widow Security BW RAS 400 installation manual

Vector

Vector Power City DK080706 Owner's manual & warranty

Ozito

Ozito OJS-800 instruction manual

Profi-Partner

Profi-Partner 46387 instruction manual

EZ STARTER

EZ STARTER EZ-45 user guide

Viper

Viper 4204 owner's guide

Essex Electronics

Essex Electronics KE-1701 user guide

EINHELL

EINHELL EGS 3600 Directions for use

Rooboost

Rooboost RB-1750WP user manual

Code Alarm ca 2051 User manual

Popular Remote Starter manuals by other brands