Cochlear Nucleus CP910 User manual
Nucleus® CP910 and
CP920 Sound Processor
Hybrid Hearing Supplement*
Patient Information
* FDA approved for use with the
Hybrid L24 (CI24REH) Implant
2
Microphones and
microphone protectors
Coil
Indicator light
Coil magnet
Upper button Coil cable
Lower button
CP920
Processing unit
Serial number
Acoustic component
* Acoustic component only approved for use with the Nucleus Hybrid Implant
Compact
rechargeable
battery module
CP920 Sound Processor with Acoustic Component*
with Compact Rechargeable Battery Module
Microphones and
microphone protectors
Coil
Indicator light
Coil magnet
Upper button Coil cable
Lower button CP910
Processing unit
Serial number Accessory
socket
Earhook
Standard
rechargeable
battery module
CP910 Sound Processor
with Standard Rechargeable Battery Module
3COCHLEAR NUCLEUS 6 • HYBRID HEARING SUPPLEMENT
Symbols
Note
Important information or advice.
Tip
Time saving hint.
Caution (no harm)
Special care to be taken to ensure safety and effectiveness.
Could cause damage to equipment.
This guide is for recipients of the Cochlear™
Nucleus®Hybrid L24 Cochlear Implant. It
providesinformation about using an acoustic
component with your sound procesor for
Hybrid Hearing. You can also choose a
Cochlear Nucleus CR210 Remote Control or
CR230 Remote Assistant to control
your processor. For more about remotes,
please consult your remote user guide.
People with certain types of hearing loss can wear the processor in
Hybrid mode by adding an acoustic component. The acoustic component
sends amplified acoustic sound into the ear canal.
A number of tools and accessories are supplied with your sound processor.
NOTE
Please refer to the booklet Important
Information: Warnings, Precautions and
Electromagnetic Compatibility for important
information that applies to cochlear
implant systems.
4
Wear
4
5COCHLEAR NUCLEUS 6 • HYBRID HEARING SUPPLEMENT
Your processor is protected against failure
from dust and temporary immersion in
water (IP57 rated) when you wear it with:
• a rechargeable battery module
• a coil and coil cable
• a closed accessory socket
• no acoustic component.
Your processor is protected against failure
from splashing water or access of foreign
objects 1.0 mm in diameter or larger
(IP44 rated) when you wear it with:
• a tamper resistant battery module
• a coil and coil cable
• a closed accessory socket
• an acoustic component worn in the ear.
Water, Sand and Dirt
6
The acoustic component
If your sound processor is programmed for use in Hybrid mode, you can
wear it with an acoustic component.
Wear your acoustic component
Hold the coil in one hand and place the
processor on your ear with the other.
1
Place the coil on your head.
2
Place your dome or earmould in your
ear as instructed by your clinician.
3
When removing your coil and processor,
remove your dome or earmould as
instructed by your clinician.
4
TIP
Always use the removal cord
(if present) when taking the
earmould out of your ear.
7COCHLEAR NUCLEUS 6 • HYBRID HEARING SUPPLEMENT
Remove your acoustic component
Wear your processor without the acoustic component by
replacing it with a standard earhook. Talk to your clinician
before replacing:
Locate the opening under the earhook.
2
Remove the battery module from the
processing unit by twisting the two
parts as shown.
1
8
Re-attach the battery module.
4
Press firmly on top of the Cochlear
EAC200 Series Earhook with your
thumb to click it off the sound
processor.
5
Insert a Cochlear EAC200 Series
Screwdriver into the hole. Carefully
push and twist the screwdriver until
the speaker unit cable disconnects.
3
CAUTION
Use only the EAC200 Series Screwdriver
– not the Cochlear™ Nucleus® Battery
Cover Locking Tool – to remove the acoustic
component.
9COCHLEAR NUCLEUS 6 • HYBRID HEARING SUPPLEMENT
Click the standard earhook into place.
7
Insert a new processing unit plug into
the speaker unit cable socket. Make
sure the plug goes all the way in.
6
10
Attach your acoustic component
Press firmly on the top of the standard
earhook with your thumb to click it off
the processor.
1
2Insert the Cochlear™ EAC200 Series
Screwdriver into the hole in the
processor unit plug.
3Use the screwdriver to carefully remove
the plug. Do not twist or try to lever the
plug out. Save the plug.
Other manuals for Nucleus CP910
6
This manual suits for next models
1
Table of contents
Other Cochlear Recording Equipment manuals
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear SPrint Sound Processor Programming manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear Baha Compact User manual
Cochlear
Cochlear Osia 2 User manual
Cochlear
Cochlear Nucleus Kanso 2 User manual
Cochlear
Cochlear Aqua+ for Kanso 2 User manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear baha bp110 power User manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear Baha 5 Power User manual
Cochlear
Cochlear Baha 4 User manual
Cochlear
Cochlear Baha 6 Max User manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear Nucleus CP910 User manual
Cochlear
Cochlear Nucleus CP910 User manual
Cochlear
Cochlear Baha 5 SuperPower User manual
Cochlear
Cochlear Nucleus CP810 User manual
Cochlear
Cochlear Baha 5 Power User manual
