Cobra 02-4265 User manual

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

12/08 ®

*Cobra®recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

1 –FORMED RACK

2 –LONG SPACERS

2 –SHORT SPACERS

4 –M8 x 50mm BUTTONHEAD BOLTS

Application(s) >

YAMAHA RAIDER 2008-2018

Instruction Manual >

Your formed rack will install in just a few minutes using common tools. Read all instructions carefully and

completely before installing your new rack.

1. Remove the front left and right M8 bolts from both fender rails and discard.

2. Install your new rack by inserting (2) of the supplied M8 x 50 mm buttonhead bolts through the front rack

mounting holes, (2) supplied short chrome spacers, fender rail holes and into frame. Snug bolts with rack slightly

elevated in the rear to access the rear fender rail bolts.

3. Remove the (2) M8 rear fender bolts and discard. Place the (2) long chrome spacers in fender rails and lower the

rear of rack until holes line up. Insert the (2) remaining M8 x 50mm buttonhead bolts through rack, spacers,

fender rails and into frame. Check rack for proper alignment and torque all (4) bolts to their factory specifications.

02- 4265

DOCUMENT NO. 0019 REV. A

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

12/08 ®

*Cobra®recommends you always wear a helmet while rid ing. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

1 –FORMED RACK

2 –LONG SPACERS

2 –SHORT SPACERS

4 –M8 x 50mm BUTTONHEAD BOLTS

Application(s) >

YAMAHA RAIDER 2008-2018

Instruction Manual >

Your formed rack will install in just a few minutes using common tools. Read all instructions carefully and

completely before installing your new rack.

1. Remove the front left and right M8 bolts from both fender rails and discard.

2. Install your new rack by inserting (2) of the supplied M8 x 50 mm buttonhead bolts through the front rack

mounting holes, (2) supplied short chrome spacers, fender rail holes and into frame. Snug bolts with rack slightly

elevated in the rear to access the rear fender rail bolts.

3. Remove the (2) M8 rear fender bolts and discard. Place the (2) long chrome spacers in fender rails and lower the

rear of rack until holes line up. Insert the (2) remaining M8 x 50mm buttonhead bolts through rack, spacers,

fender rails and into frame. Check rack for proper alignment and torque all (4) bolts to their factory specifications.

02- 4265

DOCUMENT NO. 0019 REV. A

Table of contents

Popular Motorcycle Accessories manuals by other brands

SRC

SRC B-TRK502-01-01-SL quick start guide

3M Speedglas 9100 MP operating instructions

hepco & becker

hepco & becker 6307520 00 01 manual

HOMCOM

HOMCOM AA0-077 user manual

hepco & becker

hepco & becker 6307558 00 01 manual

Wunderkind Custom

Wunderkind Custom 106503-F15 Installation and safety

Dräger

Dräger HPS 3500 Instructions for use

M-WAVE

M-WAVE SKI manual

Kuryakyn

Kuryakyn 6212 installation instructions

hepco & becker

hepco & becker 6507504 00 01 installation instructions

Tool it

Tool it PROMAX LCD 9.13G manual

Custom Dynamics

Custom Dynamics TruWrapz installation instructions

Roof

Roof RO200 CARBON How to use and maintain

Kabuto

Kabuto Japan IBUKI instruction manual

PUIG

PUIG 5051 Mounting instructions

rizoma

rizoma ZTH050 user manual

Joubert

Joubert 10001711 instruction manual

Sperian

Sperian Optrel p420 manual