CNAP MONITOR 500 HD User manual

CNAP®MONITOR 500 “HD“

QUICK GUIDE

Version 07/2016 | V1.5.5 ENThis Quick Guide DOES NOT REPLACE the user manual!

SET UP MEASUREMENT

FAQs

CONTENT

NAVIGATION

FUNCTIONS:

FAST ACCESS

Hemodynamic Parameters...................................................................................5

Measurement Select Measurement Mode / Start Measurement...................16

Started Measurement: Perfusion Index / Signal Quality.........17

Choose Patient Category / Enter Biometric Data....................18

Stop / Resume Measurement...................................................19

Set Up Checklist for fast Set Up.............................................................6

Power Up CNAP® Monitor.......................................................... 7

Prepare CNAP® Monitor for Measurement - Components................8

Prepare CNAP® Monitor for Measurement - Connections...................9

Connecting to a Patient Monitor.............................................10

Zeroing of CNAP® and patient monitor...................................11

Overview CNAP®Monitor Patient Set Up ...............................12

Choose correct CNAP®finger sensor size.................................13

Place CNAP®finger sensor and CNAP® Controller...................14

Place NBP Cuff ..........................................................................15

Navigation Navigation Frames....................................................................20

Function of Navigation Frames................................................21

CONTENT

Main Keys and Status Indicators.............................................23

The “SETUP“ Key......................................................................25

Calibration Modes: Function / Benefits.................................. 26

Triggering A Manual NBP - Fast Access...................................27

When is it recommended to trigger a manual NBP?.............28

“Change Finger“ manually......................................................29

Functions -

Fast Access

FAQs: 1. How can I change alarm settings for current measurement?......31

2. How can I change alarm settings permanently?...........................32

3. Enabling hemodynamic parameters for a measurement?...........33

4. How can I improve measurement quality?....................................34

5. How can I adjust trend, signal and time settings?........................35

6. The battery?....................................................................................36

7. Service intervals for the CNAP®Monitor? ....................................37

8. What to do if CNAP®needs service ?............................................38

9. SERVICE HOTLINE ?.........................................................................39

10. Where can I get additional information?......................................40

11. How can I contact CNSystems directly? .........................................41

HEMODYNAMIC PARAMETERS

CNAP®Monitor Measurement Type

BP BP + PPV BP + HD

CNAP®continuous noninvasive arterial pressure, sys,

dia, mean x x x

NBP noninvasive oscillometric blood pressure

sys, dia x x x

Pulse pulse rate x x x

PPV pulse pressure variation x x

SVV stroke volume variation x

CO continuous noninvasive cardiac output x

CI cardiac index x

SV stroke volume x

SVI stroke volume index x

SVR systemic vascular resistance x

SVRI systemic vascular resistance index x

SET UP CHECKLIST

SET UP 6

CHECKLIST

STEP 1

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 2

Start the device and connect the CNAP®Controller Cable (orange connectors)

to CNAP®Monitor and CNAP®Controller (see also p.7,9)

Select the right NBP cuff size for the patient using the indicator on the inside of

the NBP cuff and connect the black hose to the CNAP®Monitor. (see p.15)

Fit the NBP cuff on the patient‘s upper arm. The NBP cuff can be placed

ipsilaterally or contralaterally to the CNAP®finger sensor. (see p.15)

Use the indicator on the CNAP® Controller to find the correct CNAP®finger

sensor size for the patient. (see p. 13)

Slide the finger sensor over two neighbouring fingers, and fix the CNAP®

Controller on the forearm using the Velcro fixation cuff. (see p. 14)

Be sure that the CNAP® Controller is in the center of the forearm cuff so

that the patient can freely bend his / her wrist. (see p.14)

Start measurement by clicking “Start New Measurement“. Choose patient

category “Adult“ or “Pediatric“. (see p.16, 18)

During CNAP ®initialisation the patient needs to be in a stable position.

During general anesthesia start CNAP ®before or after the induction phase!

ATTENTION

Press

POWER ON / OFF

button

When alarm sounds,

confirm by pressing the

yellow alarm button.

POWER UP CNAP® MONITOR

SET UP

PREPARE CNAP®MONITOR FOR MEASUREMENT

SET UP 8

COMPONENTS

CNAP®Monitor

CNAP®Controller

CNAP®Finger sensor

NBP Cuff

NBP Air hose

CNAP®Controller Cable

2 4

PREPARE CNAP® MONITOR FOR MEASUREMENT

SET UP 9

CONNECTIONS

Connect the controller cable to

the orange connector of the

CNAP

Controller.

Connect finger

sensor to black

connection of

CNAP

Controller.

Connect NBP air

hose to NBP Cuff

Connect the

NBP air hose and the

CNAP

Controller

cable to the CNAP

Monitor.

Plug in straight, not

tilted!

ATTENTION

CONNECTING TO A PATIENT MONITOR

SET UP 10

Connect Transducer cable and

patient monitor interface cable.

Prepare patient

Interface cable Transducer Cable

Select right color from

list in user manual

(Chapter 4-5-2) and

connect it to the BP

wave out port on the

CNAP ® Monitor.

connect to

Zeroing neccessary! (see next page)

ATTENTION

BP Wave

Out port

monitor Interface Cable

and connect it to the

arterial port of your

patient monitor.

Table of contents

Popular Medical Equipment manuals by other brands

TekTone

TekTone Tek-CARE160 Installation and operation manual

NeuroMetrix

NeuroMetrix Quell 2.0 user manual

AMT

AMT XLR8 Quick reference guide

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 instruction manual

EDAN

EDAN SONOTRAX Pro user manual

Restorative Therapies

Restorative Therapies RT300 Service guide

Gendex

Gendex Expert DC installation manual

Dexcowin

Dexcowin ADX4000W user manual

Libelium

Libelium MySignals user manual

Acelity

Acelity V.A.C.ULTA 4 user manual

Caputron

Caputron ActivaDose II tDCS quick start guide

FujiFilm

FujiFilm Sonart Features

Plinth 2000

Plinth 2000 93CDT Service manual

GE SENOGRAPHE 800T Operator's manual

GE Definium 5000 Operator's manual

Kanmed

Kanmed GE-1380 user manual

Huntleigh

Huntleigh FD1 Instructions for use

Stryker

Stryker SPR Plus Operation manual