3.Software: Ezcad2/3 & Lightburn
Lightburn
Does Cloudray marking machine support lightburn?
At this time, only devices that are supported by EzCad2 or EzCad2 Lite
software will work with LightBurn and only those that connect to a computer
over USB. Raycus, JPT, IPG, and Max Photonics fiber sources, as well as CO2
laser sources are supported. (Max Photonics are JPT compatible
）
Does Lightburn offer a free trial?
30-day free trial
Laser display "Disconnected" alarm
1. Shift-click the ‘Devices’ button in the ‘Laser’ window, you force LightBurn
to re-establish communications with your device.
2.Try rebooting Lightburn, disconnecting and reconnecting Cloudray laser,
shift click on Device, tried reloading Device, rebooting your lap top, Com
port is selected.
3. Do you have multiple copies of LightBurn running, maybe? Or any other
software that might be holding on to your COM port? Try bringing up the
task manager (Ctrl+Shift+Esc) and seeing if anything is running that you
don’t expect, or a hung copy of LightBurn running in the background.
Can use the EzCad2 software but can't
get the Lightburn software
Software driver maybe wrong. Ezcad2
and Lightburn software have different
drivers. If using lightburn software, you
have to install Ezcad2 driver(Used by
galvos), please check attached picture as
referenced. Only one driver can be
installed on a computer.
