CLN Fusion User manual
CLN Fusion Manual
CLN Fusion Manual Ver. 1 3
Important
Make sure you read and fully understand this manual before operating your
automated machine. Failure to do so will put yourself and others in harm
and will void the warranty of this equipment.
Intended Use of Machine
•Machines are designed to automatically produce Channel Letters out of:
•Aluminum Coiled Stock Material in gauges of:
•0.032”
•0.040”
•0.063” (Reverse Channel Letters Only)
•Aluminum Coiled Stock Material in Depths of (but not limited to):
•1.5”
•2.0”
•3.0”
•5.3”
•Machines are not intended for:
•Bending, Notching, Flanging, or Shearing steel or similar materials.
CLN Fusion Manual Ver. 1 4
Introduction
Everyone at CLN of South Florida, Inc.would like to
thank you for purchasing the CLN Brand Bending
Machine.We understand that you had a choice and
you picked ours.Before you get started, there are a
few things that we need to go over.
CLN Fusion Manual Ver. 1 5
Purpose of this publication
•To help guide you through the learning curve of
setting up and operating a new piece of automated
equipment.
•As a training aid.
Contents
This manual will take on average about an hour to read
and doing so will help you to better understand the
machine functions and operations.
Disclaimer
CLN of South Florida, Inc.makes every effort to provide
their valued customers with current and accurate
information about their equipment.However due to
constant research and development and an
unsurpassed passion to provide our customers with the
latest in cutting edge technologies, we cannot guarantee
that the contents of this manual are current and
complete.
Copyright
This manual contains information that is copyright
protected. All rights are reserved.No part of this manual
may be repurposed or reused without consent from CLN
of South Florida, Inc.
Safety
Your Responsibilities:
•As an operator of the CLN machine, you are responsible to follow all safety procedures.Any person who operates or does any
maintenance on this machine must be aware of all safety procedures.
CLN Fusion Manual Ver. 1 7
Safety Precautions:
•Do not wear any loose fitting clothing such as scarves or hanging jewelry.
•Do not put hands in or on any moving parts at any time.
•Do not operate machinery while under the influence of alcohol, drugs or any other substance that may impair
or alter your judgment.
•Always wear gloves when handling sharp materials.
•Always wear eye and hearing protection when operating equipment.
•Do not operate the machine without all of the covers in place.
•Keep hands, head and body out of the way of moving parts.
•When performing maintenance work on the machine always unplug the incoming electric power and
disconnect the compressed air supply.Make sure the air is completely drained out of the system.
•Be sure to stay clear of moving parts when turning on the air supply, the tools may unexpectedly move
during the initial connection.
CLN Fusion Manual Ver. 1 8
•When opening the side covers, you must first unplug the machines electricity, disconnect the compressed air line and completely
drain the air out of the system. If you do not disconnect the electric power and the compressed air line and drain the system you
will put yourself at serious risk of causing permanent damage to yourself or death.
Opening the Side Covers:
Guidelines:
•Follow the safety rules at all times.Under no circumstance should equipment be used for anything other than what it is designed for.
Any person who operates or does maintenance on this equipment should be aware of all safety and operating procedures.It is
extremely important that this equipment is handled with care! Distractions such as horseplay, carelessness, loud noises and sudden
movements can result in unsafe conditions, therefore should be avoided at all times when operating equipment.
Environmental Considerations:
•Climate Control
•The machine should be in a climate controlled area and NOT exposed to extreme temperatures and or weather.
•There are components on the machine that are susceptible to corrosion and should NOT be exposed to any water based
lubricant fluid or humidity.
•Clean Working Conditions
•Your machine should be located in a clean environment.
•Keep your machine and work area free of dirt and debris.
•Lighting
•Your machine should be operated in a well lighted area.
CLN Fusion Manual Ver. 1 9
Caution Labels:
Emergency Stop:
This machine is equipped with an emergency stop
located at the front of the machine.Pressing it will halt
all motion on the machine as well as bleeding all of the
compressed air from the machines pneumatic cylinders.
The machines computer and monitor are the only two
components that will remain on with the emergency
stop pressed.
Table of contents
