ClearSounds SW200 User manual
1 – ENGLISH
Operating Manual
Clearsounds® SW200
Shake Up Wake Up
Dual Alarm Clock &
Telephone Ring Signaler
1 – ENGLISH
FRANÇAIS ESpAñoL ENGLISH
CSC48
V508
CSC48noAmp.indd 1 7/21/08 5:15:24 PM
2 – ENGLISH
TABLE OF CONTENTS
PRIOR TO USE
Pg. 3 .................. Congratulations
Pg. 3-4 ............... Important Safety Instructions
Pg. 5-6 ............... Location of Controls
Pg. 7 .................. Key Descriptions
INSTALLATION
SETTINGS
Pg. 9 .................. LCD Contrast
Pg. 9 .................. Connecting a Lamp
Pg. 9-11............. Alarm Notification Modes and Activation
OPERATION
Pg. 12 ................ Set Time
Pg. 13-14 .......... Set Alarm and Notifications
Pg. 14 ................ Snooze
Pg. 14 ................ Alarm Off
Pg. 15 ................ Telephone Ring Signaler
TECHNICAL SPECIFICATIONS
Pg. 16
REGULATORY COMPLIANCE
Important FCC Information for Customers
Pg. 16-17
INDUSTRY CANADA
Pg. 18
WARRANTY POLICY
Pg. 19-20
3 – ENGLISH
PRIOR TO USE
Congratulations on your purchase of the SW200 Shake Up Wake
Up Alarm Clock from ClearSounds Communications®. Please
read this User Manual carefully in order to get the best use out
of your new product. Keep this manual near the telephone for
easy reference.
Please visit our website at www.clearsounds.com to register
your product, download additional manuals and review
trouble-shooting tips.
Be sure to save your sales receipt as your proof of purchase
should you need warranty service.
Warranty Service – This product is designed to provide years of
quality service. However, if there is a malfunction, follow the
warranty procedure on pages 19-20.
█ IMPORTANT SAFETY INSTRUCTIONS
When using your alarm clock, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
injury to person, including the following:
WARNING: The SW200 Alarm Clock is capable of amplifying
sounds to a loud volume. It is important to instruct all potential
users of its proper operation.
WARNING: To avoid the possibility of electrical shock, do not
use this product near water (For example, near a bathtub,
wash basin, kitchen sink or laundry tub, in a wet basement
or near a swimming pool) while in the bathtub or shower or
when you are wet. If the clock becomes submerged in water,
do not attempt to retrieve it until after you have unplugged the
power cord and telephone line cord from the modular wall jack.
Do not plug the product back in until it has dried completely.
4 – ENGLISH
WARNING: There may be a remote risk of electric shock from
lightning. If the electrical storm is present in your immediate
area, possibility of electrical shock exists.
WARNING: When cleaning, unplug the clock, and then use
a damp cloth to wipe. Do not use liquid cleaners or aerosol
cleaners.
WARNING: No product should ever be placed near an open
radiator or heating register.
WARNING: Occasionally a power surge can occur on electrical
lines without warning. With any electrical device that you plug
into an outlet, it is suggested you use a surge protector. A
surge protector will prevent power surges from damaging your
phone. Surge protectors are simple devices available at your
local hardware store.
WARNING: Do not overload wall outlets or extension cords as
this can increase the risk of fire or electrical shock.
WARNING: Never push any object through the slots in the
clock. They can touch dangerous voltage points or short out
parts that could results in risk of fire or electrical shock.
WARNING: Do not cover slots and opening on the units, they
are needed for ventilation and protection against overheating.
WARNING: Alarm volume is very loud and can damage your
hearing. Never put your ear close to the speaker.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR WARRANTY
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
5 – ENGLISH
PLEASE SAVE THESE INSTRUCTIONS
█ LOCATION OF CONTROLS
1. Snooze Key
2. LED Flashers
3. Tone Control
4. Lamp On/Off Key
5. “Up” Key or LED Flash Activate Key*
6. “Return” Key or Shaker Activate Key*
7. “Down” Key or Sound Activate Key*
8. Time Set (12/24 Hour Selection or Time)
9. Alarm 1 & 2 Selection or Alarm On/Off Key
10. Volume Control
* These Keys perform dual functions
1 2
3 4 5 6 7 89 10
6 – ENGLISH
11. Lamp Outlet
12. Telphone Line IN/OUT jacks
13. Vibrating Pad Jacks
14. Telephone Ring Signaling Tone Selection
15. LCD Contrast Selection (HI-LO)
16. Speaker (Sound Ring Tone)
14 15
16
11 12 13
7 – ENGLISH
█ KEY DESCRIPTIONS
Lamp Key
Turns the connected lamp On/Off
LED Flash/Up Key
1. Activates/deactivates the LED Flash function
2. Use as the Up key when setting the time
or alarm
Shaker/Return Key
1. Activates/deactivates the Shaker (Shake
A and Shake B) function (requires
vibrating pad)
2. Use as the Return (escape) key when setting
the time or alarm
Sound Alarm/Down Key
1. Activates/deactivates the Sound
Alarm function
2. Use as the Down key when setting
the time or alarm
Set Time Key
1. Use to set the time
Set Alarm Key
1. Use to set the alarm
2. Alarm “Off” key, use when the alarm sounds
8 – ENGLISH
Installation of your ClearSounds® SW200
Shake Up Wake Up Dual Alarm Clock is easy.
If at any time you have questions about your clock after
reading this manual, please contact the ClearSounds®
Customer Service Department at 1-800-965-9043.
█ PARTS CHECKLIST
Check the contents of the box - The SW200 should contain:
1. Alarm Clock
2. (1) Vibrating Pad
3. Telephone line cord
4. User’s Manual
█ TO INSTALL:
1. Connect the AC power plug into a standard AC wall outlet or
surge protector.
2. Optional: Connect the bed shaker(s) into the shaker jack(s)
and place the shaker(s) under your pillow or mattress.
3. Optional: Connect a lamp to the lamp outlet.
The Shake Up Wake Up can be used as both an alarm clock
and a telephone ring signaler (see page 15 for instructions on
telephone ring signaling).
INSTALLATION
9 – ENGLISH
█ LCD CONTRAST SETTING
To adjust the brightness of the display, simply move the
Dimmer Control located on the back of your clock to HI or LO.
█ CONNECTING A LAMP
You are able to connect a lamp to the clock and use the lamp
for room lighting and/or alarm clock notification.
1. Connect the lamp to the lamp outlet on the back
of the clock.
2. Make sure the lamp is turned to the ON position.
3. Press to turn the lamp On/Off.
Note: You will only use to turn the lamp On/Off. Do
not turn the lamp to the OFF position.
█ ALARM NOTIFICATION MODES AND ACTIVATION
You can adjust the type of notification that is desired. The
available notifications for each alarm include: LED/optional
Lamp Flashing, Sound (with 3 pattern options), and Vibrating
Shaker (1 vibrating pad is included with the SW200). For each
alarm, you can select a combination of the 3 notifications.
To activate each of the alarm functions and have them in
“ready mode”, simply press and hold the desired notification
key until the blue backlight appears. To deactivate, press and
hold until the blue backlight disappears. After having each
function in “ready mode”, you will be able to select the specific
notification you desire for each alarm (see Set the Alarm and
Audible, Visual & Shaker Notification on page 13-14).
SETTINGS
10 – ENGLISH
LED/optional Lamp Flashing
Press and hold the LED Flash key to activate the LED
flasher function. If you have plugged a lamp into the clock, it
will also flash when the alarm goes off.
Vibrating Pad Jacks
You can connect a vibrating pad to each of the vibrating pad
jacks on the back of the clock. Jack A is used for Alarm 1 and
Jack B is used for Alarm 2. Each shaker operates independently.
Simply plugging the shaker in to the jack and activating
the shaker function will allow the shaker to vibrate during the
scheduled alarm time.
Press and hold the Shaker key to activate the
shaker function.
SOUND ALARM
Adjustable Volume Control
The Volume control increases or decreases the loudness of the
alarm, which can go as high as 87 dB. The volume control
is adjustable for all 3 sound alarm patterns (see pg. 11 for
more information about sound alarm patterns). To adjust the
volume, roll the slide wheel up to make it louder and down to
make it softer.
Adjustable Tone Control
The Tone control shapes the sound by changing the frequencies
of the alarm. The tone control only works for sound alarm
Pattern 1 (see page 11 for more information about sound
alarm patterns).
Other manuals for SW200
1
Table of contents
Other ClearSounds Alarm Clock manuals
