Clearfield FieldSmart SCD User manual
FieldSmart®Fiber Distribtion Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ____________________________________________________
Manual 019477 REV A - Jan 2018
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
2
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ______________________________________________________
Manual 019477 REV A - Jan 2018
Table of Contents
Application 3
Description 3
Technical Specications 3
Optional Items 4
Overview for Indoor/Outdoor Wall Box 4
Wall box Installation 5
Installing Sealcons 5
Installing U-Mount for xPAK in FDP-XWB1 6
Installing Universal Cassette Mount for FDP-XWB2 7
Installing Cassettes in FDP-XWB5 8
Connector Cleaning Procedure 9
Standard Warranty 12
Proprietary Notice 13
Technical Support 13
3
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019477 REV A - Jan 2018
Technical Specications
Description
Application
FieldSmart SCD Wall Box for Cassette FieldSmart SCD Wall Box for xPAK
Dimensions External: 17.56” H x 13.17” W x 3.84” D;
Internal: 14.1” H x 10” W x 3.25” D
External: 12.17” H x 8.62” W x 3.91” D;
Internal: 9” H x 6” W x 2.25” D
Port Density Up to 24 ports Up to six ports
Cassette Types
Supported Clearview Blue Clearview®xPAK
Splice Capacity 24 splices in each Clearview Cassette Six splices in each Clearview xPAK
Connector Types SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC, MPO
Cable Types Indoor Riser, Indoor Plenum, Indoor/Outdoor, Outdoor (Riser/Non-Rated), Outdoor Armored (Riser/Non-Rated), FieldShield®
Storage Capacity One meter of 900 μm ber and up to 5 meters of jacketed ber
Material UV stabilized, ame retardant polymer (PVC)
NEMA Rating NEMA 4
Items Included Box, Designation label, ¾” Strain relief tting(ts .51-.71”cable;),
nut, grommet for .24-.63” cable, Cassette Universal Mounting Kit
Box, ¾” Strain relief tting, nut, grommet for .24-.63”
Ideal for any small count ber scenario, the FieldSmart Small Count
Delivery (SCD) Wall Box accepts up to two Clearview®Cassettes,
providing up to 24 bers in a discrete footprint, or a single Clearview
xPAK of 6 bers in the smaller wall box, without sacricing ber
management. The lockable, NEMA 4 rated enclosure is compact,
making it ideal for a variety of applications, including harsh
environment locations surrounding ber demarcation, entrance
facilities, FTTP drop boxes and cell backhaul. Additional applications
include MDU, business class services, power and wind farms and
DOT/Trafc monitoring.
As a lower cost alternative to sheet-metal designs, this plastic, lockable,
NEMA 4 rated enclosure is consistent with Cleareld’s long-standing
reputation of delivering simple solutions for complex problems. Optimized for use with the
Clearview xPAK and Cassette, the FieldSmart Small Count Delivery Wall Box is ideal for any small count ber scenarios
where a discrete footprint without sacricing ber management is required. Standardizing on a craft-friendly, building block
architecture reduces the operating costs of ber deployment by reducing installation times and inventory carrying
requirements.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
4
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ______________________________________________________
Manual 019477 REV A - Jan 2018
Optional Items
Optional Accessory Kit (P/N FDP-xAK1) includes:
• 1 Strain relief tting and nut (sealcon)
• 2 Strength member clamps
Overview for Indoor/Outdoor Wall Box
1
3
4
FDP-XWB2 and FDP-XWB1
1. Mounting Tabs (top and bottom)
2. Hinged Side
3. Secondary Security Lock Hole
4. Screws for Additional Security
2
5
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019477 REV A - Jan 2018
Wall box Installation
Unpack the wall box from shipping container and make sure to check for small items that may be included. These would be
bagged separately and included in the shipping container.
The wall box is installed via the 2 slots located in the top and bottom of the enclosure. Hold the panel up to the mounting
surface and mark the hole locations with a marker.
Note: A level may be used to ensure that the panel is mounted straight.
Pilot holes can then be drilled at each mark. Using appropriate fasteners for the material, attach the panel to the surface.
Installing Sealcons
Identify the location of the sealcon – on both size boxes, the sealcon locations have been pre-marked on the inside of
the box for easy identication. There are two sealcon locations for each box.
Use a 1” drill bit (step drill is preferred tool); drill out the plastic area enough so that the water tight strain relief tting will
t through the hole (Figure 1).
Install the sealcon through the hole, with the threads on the inside of this box.
If optional strength clamps are used, install them onto the strain relief threads before installing nut to tighten (Figure 3).
Install the nut onto the threads and tighten securely until the tting will not rotate (Figure 2).
Insert cable through sealcon and tighten dome nut to compress rubber sealing grommet.
1.
2.
3.
4.
5.
6.
Figure 1 Figure 3
Figure 2
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
6
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ______________________________________________________
Manual 019477 REV A - Jan 2018
Locate the U-Mount package (P/N 012022 - typically supplied
with the xPAK)
Remove contents from plastic bag and carefully cut the
different components from the main bracket. There is an
instruction card included with each U-Mount bracket.
1.
2.
Once removed, screw the U-Mount bracket and retaining clips
into the wall box. The location for this is located on the back of
the instruction card.
3.
You are now ready to install the xPAK into the wall box. See
Clearview xPAK install manual for details. Typical cable/
jumper routing is included on the back of the instruction card.
4.
Installing U-Mount for xPAK in FDP-XWB1
7
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019477 REV A - Jan 2018
Installing Universal Cassette Mount for FDP-XWB2
Locate U-Mount package (P/N 012728) - typically shipped
separately inside of wall box.
Remove contents from plastic bag and carefully cut the different
components from the main bracket. There is an instruction card
included with each U-Mount bracket (P/N 012700).
1.
2.
Assemble U-Mount Bracket per instruction card.
Once assembled, screw the U-Mount bracket and retaining clips into the wall box. Location for this is on the back of the
instruction card (Figure 1).
You are now ready to install cassettes into wall box, using the thumb screws to fasten the cassettes to the clear
brackets (Figure 2). See Cassette installation manual for additional details.
Typical cable/jumper routing is included on the back of the instruction card.
Install designation label (shipped separately inside of wall box) – to the door. Make sure label is positioned below the
raised UL listing – located on the door of the box (Figure 3).
3.
4.
5.
6.
7.
Figure 1 Figure 3Figure 2
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
8
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ______________________________________________________
Manual 019477 REV A - Jan 2018
Installing Cassettes in FDP-XWB5
The FDP-XWB5 is a 5.5 inch deep version of the XWB2. Utilizing the metal plate inside the box, up to 4 Clearview Blue
Cassettes can be installed, and buffer tube slack can be routed around the outside of the radius limiters on the plate.
The wall box will arrive as shown,
with the plate installed in the box.
Twist the threaded rods into the two lower pems on the sides of
the plate. These rods will be included as a ship-along item.
1. 2.
Insert the threaded rods through the holes in
the sides of the cassettes. Slide the
cassettes down until they make contact with
the plate.
Use the provided thumb nuts to secure the
cassettes in place by threading them down
the rods and hand tightening.
3.
4.
9
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019477 REV A - Jan 2018
Inspect Then Connect
These are Cleareld recommended products/applications. Use the product
you feel will complete your cleaning procedures. Create a “best practice” for
your company and follow those procedures.
The use of Chemtronics end face and bulkhead cleaning products and
techniques ensures a clean end face, no matter the type of contamination.
Before cleaning any connector, be sure you know what type of contaminate
you are cleaning (dry, uidic, or combination). All the available products are
good, it’s the process that you need to be aware of. Using a dry cleaning
method to clean “dirt” can lead to scratching of the end face. Learn the
process of cleaning properly.
Note: It is NOT recommended to use isopropyl alcohol to clean the end face.
Cleaning an SC/LC Connector
Cleaning the End Face
• Place one wiping paper on QbE-2 FiberSafe™ Cleaning Platen.
(Figure 1)
• Apply small amount of precision cleaner (about 1” in diameter) with
Electro-Wash MX pen on to one end of the wipe. (Figure 2)
• Hold end face at a 90 degree angle. For APC connection, adjust by
slightly tilting the container or end face. Angle is correct when no drag is
felt on the end face. (Figure 3)
• Draw end face from wet to dry part of the wipe 3 times. Use just enough
pressure to ensure complete contact between end face and the wipe.
Note: DO NOT retrace previous step.
Figure 1
Figure 2
Figure 3
Connector Cleaning Procedure
Whether factory terminated or eld spliced, clean connectors are essential for proper system operation. Even the smallest
dust particle can cause transmission problems, so for optimal network performance inspect, and if necessary, clean
connectors and adapters prior to mating.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
10
FieldSmart®Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
Installation Manual ______________________________________________________
Manual 019477 REV A - Jan 2018
Cleaning the Ferrule
• Lightly moisten the ber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1”) of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the swab, 1 side down to the
wetted area and hold for a count of 1-2-3-4-5. (Figure 4)
Figure 4
Figure 5
Figure 6
Cleaning the Mate Through an Adapter AND the Adapter Itself
• Lightly moisten the ber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1”) of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the tip of the swab onto the
wetted area and hold for a count of 1-2-3-4-5.
• Insert the swab into the adapter to the connector, press lightly against
the connector, twist 2-3 times, remove and discard.
• Dry with a second dry swab.
• Inspect, repeat cleaning if necessary, and test for signal strength.
• Use additional swabs to clean inside the actual adapter. Moisten
swab, like above, and insert through hole and remove while twisting.
(Figure 6)
• Insert swab into side of ferrule, wet side to the ceramic ferrule and
circle around 2-3 times and remove. Turn swab to dry side and repeat.
(Figure 5)
Table of contents
Other Clearfield Cable Box manuals
Popular Cable Box manuals by other brands
FBS
FBS C01 installation instructions
peerless-AV
peerless-AV IBA2 Installation and assembly
Extron electronics
Extron electronics Cable Cubby 1202 installation guide
peerless-AV
peerless-AV IBA3AC Installation and assembly
Channel Vision
Channel Vision AFFINITY P-0328 instructions
Minebea Intec
Minebea Intec IE11357 operating instructions
StarTech.com
StarTech.com BOX4CABLE manual
Commercial Electric
Commercial Electric 5053-WH installation guide
Motorola
Motorola DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT... User's reference manual
Renkforce
Renkforce 1395556 operating instructions
Huawei
Huawei FAT9102SD-32G Quick installation guide
VISSEM Electronics
VISSEM Electronics Opticube VSOF-OTB-E manual
Beta
Beta 1844 15-H05/SCK Instructions for use
FSR
FSR FL-1550 installation instructions
Renkforce
Renkforce 1674559 operating instructions
Minebea Intec
Minebea Intec PR 6130/64Sa installation manual
KS Tools
KS Tools efuturo Wallbox operating instructions
Chatsworth Products
Chatsworth Products Evolution installation instructions