Clearaudio Statement V2 User manual
User manual
© clearaudio electronic GmbH, 2018/05 Made in Germany
Statement V2
User manual
2 © clearaudio electronic GmbH, 2018/05
Dear Clearaudio customer,
Congratulations on your purchase of the
Statement
V2
turntable.
You have purchased a state-of-the-art turntable, the
Statement V2
, a world class product from
Clearaudio electronic GmbH.
The special resonance-optimised construction, the external motor-unit and the patented
Clearaudio -
CMB
-bearing-technology guarantees absolute speed stability, pure pleasure in
listening and reproduction absolutely faithful to the original.
Thank you very much your condence.
Please read this user manual carefully to ensure that your
Statement
V2
turntable is correctly
installed ready to take you to a new dimension of music reproduction.
We hope you will enjoy your new Clearaudio
Statement
V2
turntable.
Clearaudio electronic GmbH
Please read the warning before connecting your
Statement
V2
turntable to the mains supply.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
- Copyright Act 1956,
- Dramatic and Musical Performers Act 1958,
- Performers Protection Acts 1963 and 1972,
- Any more recent legal regulations.
The Clearaudio
Statement V2
meets the regulations concerning electromagnetic
disturbance (EMC) and low-voltage appliances.
User manual
Made in Germany 3
Contents
1. Packaging overview ............................................ 4 - 5
2. Construction overview ........................................ 6
3. Setup and operation ............................................ 7 - 15
4. Motor adjustment ................................................ 16
5. Special notes ....................................................... 17
6. Technical data ..................................................... 18
Warranty information ............................................. 19 - 20
User manual
4 © clearaudio electronic GmbH, 2018/05
1. Packaging overview
The
Statement V2
turntable is packed and delivered on either a Euro pallet or two half size Euro
pallets. The Packing is specially made for the
Statement V2
turntable and should be retained for any
repacking.
Please note:
The
Statement V2
turntable is very heavy and will require at least two people to unpack and setup.
Attention / Warning:
IMPORTANT!
Before it is fully assembled there are strong magnetic elds around the main bearing,
these could interfere with heart pacemakers and so the Statement V2 should not be
setup by anyone with a pacemaker.The
Statement V2
turntable is extremely heavy and
should not be assembled by anyone with back problems.
The two wooden boxes contain the turntable stand and the pendulum weights, as well as ve (5)
separately packed cartons containing all other parts (e.g. massive metal cross, acrylic chassis,
bearings etc).
Please check the accessories contents according to the following list before you setup the turntable.
1. Two pairs of white gloves 5. Three bases as counter weights (40mm)
2. Two belts 6. Four bases as at pads
3. Tool for adjustment of stainless steel
discs (pendulum weight) 7. Polishing paste
4. Three bases as counter weights (20mm) 8. A set of hex wrenches
1
65
432
8
7
User manual
Made in Germany 5
1312
11109
9. Bearing oil 13. Bubble level gauges
10. Acrylic cleaner 14. Not shown: Two wooden blocks
11. Screwdriver 15. Not shown: User manual
12. Statement clamp 16. Not shown: Warranty card, Clearaudio
certicate card (QCQ)
User manual
6 © clearaudio electronic GmbH, 2018/05
2. Construction overview
Pic. 1: Construction overview
User manual
Made in Germany 7
3. Set up and operation
1.
Select the position in which you will uste the
Statement V2
turntable. Place the
Statement V2
turntable base in this
position on the four supplied feet.
2.
Place the two wooden blocks beneath the
Statement V2
base as shown.
Pic. 2: Placing the
Statement
Pic. 3: Placing the
Statement
User manual
8 © clearaudio electronic GmbH, 2018/05
IMPORTANT!
Being careful not to damage the bearing spindle on top of the pendulum shaft, assemble the
pendulum, starting by sliding a solid metal disc over the pendulum shaft so that it rests on the
wooden blocks. Be sure to place a felt mat between each metal disc, building the pendulum with
three solid discs at the bottom, then six half-cut-away discs, then two more solid discs, nally adding
the solid disc engraved with the words Clearaudio
Statement V2.
Pic. 4: Placing the discs
Disc engraved with
„Clearaudio
Statement
“
Disc, solid
(2 pcs.)
Disc, half cut away
(6 pcs.)
Disc, solid
(3 pcs.)
Place a felt mat in
between each stainless
steel platters
Please note:
If you are using the
Statement V2 TT1
tangential tonearm, position the half-cut-away discs with the
cut-away section at the rear of the turntable.
3.
Place the four cork damping plates on top of the four
corner pillars.
Place 4 pcs. damping
plates if not assembled
already from the factory
Please note:
Again, being careful not to damage the bearing spindle on
top of the pendulum shaft, lower the stainless steel cross
frame over the pendulum shaft so that is rests on the four
cork damping plates.
Pic. 5: Placing the cork damping plates
User manual
Made in Germany 9
5.
Set the cross shaped massive metal part through the spindle onto the four cork.
6.
Tighten the bearing to the shaft by tightening the screws in the bearing collar (8x).
Pic. 6: Placing the metal part Pic. 6.1: Placing the metal part
Pic. 7: Tighten the bearing
User manual
10 © clearaudio electronic GmbH, 2018/05
7.
Lift the pendulum shaft to align the V-shaped groove in the pendulum shaft with the locking screws
in the gimbal bearing. Lock the gimbal bearing to the pendulum shaft by fully tightening the eight
screws so that they locate in the groove of the
pendulum shaft.
Pic. 9: Removing the wood spacers
IMPORTANT!
Carefully lift the whole upper section, raising the
pendulum o of the wooden blocks.
Pic. 8: Lifting the upper part
8.
Remove the wooden blocks from beneath the
turntable and carefully lower the upper section
back onto the four cork damping plates.
Other manuals for Statement V2
1
Table of contents
Other Clearaudio Turntable manuals
Clearaudio
Clearaudio Ovation User manual
Clearaudio
Clearaudio Master Solution User manual
Clearaudio
Clearaudio Innovation Compact User manual
Clearaudio
Clearaudio smart power 12V User manual
Clearaudio
Clearaudio Emotion SE User manual
Clearaudio
Clearaudio Universal User manual
Clearaudio
Clearaudio Verify User manual
Clearaudio
Clearaudio concept V2 User manual
Clearaudio
Clearaudio Performance DC User manual
Clearaudio
Clearaudio Innovation Wood User manual
Clearaudio
Clearaudio Master Innovation User manual
Clearaudio
Clearaudio Master Innovation Series User manual
Clearaudio
Clearaudio Champion User manual
Clearaudio
Clearaudio Smart Matrix User manual
Clearaudio
Clearaudio Ovation User manual
Clearaudio
Clearaudio Concept User manual
Clearaudio
Clearaudio Statement User manual
Clearaudio
Clearaudio Performance DC User manual
Clearaudio
Clearaudio Emotion SE User manual
Clearaudio
Clearaudio Stroboscope Testrecord User manual
