Clearaudio Satisfy User manual

Hi-Fi Components clearaudio electronicGmbH

Spardorfer Str. 150 D-91054 Erlangen Tel. +49 9131 40300100FAX +49 9131 40300119

www.clearaudio.de www.analogshop.de info@clearaudio.de / copyright clearaudio2015

User Manual

(for all Satisfy tonearm models)

Montageanleitung

(für alle Satisfy Tonarme)

Made in Germany

Tonearm / Tonarm

Version 1.8_18.06.2015_E+D

Satisfy

User manual / Bedienungsanleitung

Page / Seite 2 clearaudio electronic GmbH 2015

Dear audio enthusiast,

Thank you for your decision to purchase a

Satisfy

tonearm from Clearaudio.

This tonearm is manufactured to the highest degree of tolerance and quality.

Please take a moment to read this owner’s manual to ensure correct set up, to avoid any

possible damage and to learn how proper care of your Clearaudio

Satisfy

tonearm which

will give you many years of musical enjoyment and pleasure.

Your Clearaudio team

CE-MARKING

Recording and playback of any material may require consent. For further information refer to

the following:

-Copyright Act 1956

-Dramatic and Musical Performers Act 1958

-Performers Protection Acts 1963 and 1972

-Any subsequent statutory enactments and orders

Warnings

Do not expose the equipment to rain or moisture.

Do not remove the cover from the equipment.

Do not insert anything into the equipment through the ventilation holes.

Do not handle the mains lead with wet hands.

No naked flame sources, such as lighted candles, should be placed on the equipment.

Only for use on turntables.

Satisfy

User manual / Bedienungsanleitung

Page / Seite 3 clearaudio electronic GmbH 2015

User manual 4 –10

Montageanleitung 11 - 19

Contents

1. Package contents 4

2. Satisfy - tonearm mounting 5

3. Service 9

5. Technical Data 10

Warranty information 20

Satisfy

User manual / Bedienungsanleitung

Page / Seite 4 clearaudio electronic GmbH 2015

1. Package contents

The Clearaudio

Satisfy

Tonearm is delivered in specially designed packaging to ensure its

safe transport. Please check the contents as shown in picture below and in the list at the

bottom of this page:

Satisfy tonearm with Direct Wire Plus

cable or RCA junction box

Screws:

- 3 x cylinder head screw M4 x 10

- 1 x grub screw M6 x 8

Clearaudio tonearm base

Paper tonearm alignment gauge

Satisfy counterweight

Clearaudio user manual, Quality

certificate, Warranty card and sales

return paper

Allen wrench

- 3 mm

- 2,5 mm

- 1,5 mm

Screwdriver

Satisfy

User manual / Bedienungsanleitung

Page / Seite 5 clearaudio electronic GmbH 2015

2. Satisfy –tonearm mounting

To mount the tonearm base on your armboard, please use the delivered screws (M4 x 10),

as you can see in Pic.1.

Picture 1: Mount tonearm base

Please put careful the cables and the tonearm through the armboard, pay attention that no

wire will be damaged! Now fix the tonearm with the 2 screws on the right and the left side,

not to much, so that you can adjust it in the next steps!

Picture 2: Putting the tonearm through the armboard

Satisfy

User manual / Bedienungsanleitung

Page / Seite 6 clearaudio electronic GmbH 2015

Insure that the distance from the spindle to the pivot point of the tonearm is exactly 222

mm. Moving the armboard in one direction or another will allow you to locate the correct

position. Once located, tighten the armboard down. Shown in the picture below. You can

also use the optional clearaudio cartridge alignment gauge (Art. NO: AC 005

www.analogshop.de ).

For the exact adjustments should be the cartridge mounted!

Picture 3: Distance from pivot to stylus

VTA adjustments are accomplished by loosening the two lock screws an the side of the

armboard base (shown in picture 4 and 5). Once loose, you can move the arm up or down

to achieve the desired VTA. Tighten both screws when finished. Re-check tracking force

after adjusting VTA. Please adjust the tonearm tube parallel to the turntable chassis!

Picture 4: VTA-adjustment Picture 5: VTA-adjustment

Satisfy

User manual / Bedienungsanleitung

Page / Seite 7 clearaudio electronic GmbH 2015

Azimuth adjustments are facilitated through the small (1,5 mm) allen screw (red marked

screw) on the bottom side of the armwand where the headshell enters the carbon fibre.

Once you loosen this screw, you´ll be able to rotate the headshell a small amount in either

direction. Be sure to tighten the screw when done.

Picture 6: Azimuth adjustment

Picture 7: Screw to adjust the

headshell

Wind the counterweight on the tonearm-tube. You can adjust the tracking force of your

cartridge by turning the counterweight (shown in the picture below)

(green arrow = more tracking force / red arrow = lesser tracking force).

Picture 8: Tracking force adjustment

Satisfy

User manual / Bedienungsanleitung

Page / Seite 8 clearaudio electronic GmbH 2015

Now you are ready for the antiskating adjustment. This also depends on the tracking force

of the cartridge and the diamond shape.

Illustration 1 Illustration 2 Illustration 3

(minimal Antiskating) (medium Antiskating) (maximum Antiskating)

Picture 9-11: Alignment of the antiskating

The general set-up is now finished.

Connect your

Satisfy

-tonearm now with the phono input of your phono-preamplifier.

(More information on adequate phono-preamplifiers and interconnects you can find on our

website www.clearaudio.de).

Please notice:

If you don`t use your

Satisfy

tonearm for a longer time, please move the tonearm lifter in

regular intervals. This avoid that the tonearm hang in a position when you listen to the

music again.

Now you are finally ready to play your vinyl records.

Clearaudio wish you a lot of pleasure with your new

Satisfy

tonearm.

alignment of the antiskating tracking force position of the antiskating-screw

minimal antiskating 10 –15mN see illustration 1

medium antiskating 15 –20mN see illustration 2

maximum antiskating 20mN and more see illustration 3

Satisfy

User manual / Bedienungsanleitung

Page / Seite 9 clearaudio electronic GmbH 2015

3. Service

If any service or repair on all Clearaudio products is necessary, please contact your dealer

/ distributor or contact Clearaudio directly. We will inform you about your nearest service

location.

PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be

transported and/or shipped. Any further questions you may have about this turntable should

be directed to the distributor or directly to Clearaudio at

Clearaudio electronic GmbH

Spardorfer Str. 150

91054 Erlangen

Germany

Tel/Phone: +49 9131 40300100

www.clearaudio.de

www.analogshop.de

[email protected]

Satisfy

User manual / Bedienungsanleitung

Page / Seite 10 clearaudio electronic GmbH 2015

4. Technical data

* Only if the warranty card is filled out correctly and sent back within 14 days to Clearaudio

Clearaudio electronic is not responsible for typographical errors in descriptions. Technical specifications subject to change or

improvement without prior notice. Availability as long as stock lasts. Copies and imprints- also only in extracts –require written

conformation through Clearaudio electronic GmbH; Germany

Clearaudio electronic GmbH 2015

Satisfy model

Aluminium for

Emotion

turntable

Aluminium

Carbon

Ebony / Satinè

Tonearm weight:

215 g

350 g

335 g

350 g

Cartridge balance

range:

2.5g –17g

Äußerer: 119.5

Null points:

Inner: 66,00 mm

Outer: 120,9 mm

Inner: 66,00 mm

Outer: 120,9 mm

Inner: 66,04 mm

Outer: 120,9 mm

Inner: 66,04 mm

Outer: 120,9 mm

Audio lead:

RCA-jacks

Clearaudio

Directwire Plus approx.

1 m from tonearm:

Cable-capacity: 156pF/m

Cable –induction: 0,52µH/m

Cable –resistance: 0,46Ω/m

Clearaudio

Directwire Plus approx.

1 m from tonearm:

Cable-capacity: 156pF/m

Cable –induction: 0,52µH/m

Cable –resistance: 0,46Ω/m

Clearaudio

Directwire Plus approx.

1 m from tonearm:

Cable-capacity: 156pF/m

Cable –induction: 0,52µH/m

Cable –resistance: 0,46Ω/m

Overhang:

17,31 mm

Overall length:

Effective tonearm

length:

302 mm

9 inches

(exact 239,31 mm)

302 mm

9 inches

(exact 239,31 mm)

302 mm

9 inches

(exact 239,31 mm)

302 mm

9 inches

(exact 239,31 mm)

Distance from pivot

to stylus:

222 mm

Tilt angle:

Maximum of tilt angle

according to the

radius:

middle skatingfactor

at a

radius of 62,9mm

und 126,9mm:

25,54°

0,123 °/cm

0,43

25,54°

0,123 °/cm

0,43

25,54°

0,123°/cm

0,43

25,54°

0,123°/cm

0,43

Warranty*:

2 years

Stand: March 2015

Table of contents

Languages:

Other Clearaudio Turntable manuals

Clearaudio

Clearaudio Emotion SE User manual

Clearaudio

Clearaudio Concept MC Technical manual

Clearaudio

Clearaudio Innovation Wood User manual

Clearaudio

Clearaudio Peerformance User manual

Clearaudio

Clearaudio Master Innovation User manual

Clearaudio

Clearaudio Bluemotion & Satisfy User manual

Clearaudio

Clearaudio Maximum Solution User manual

Clearaudio

Clearaudio Statement User manual

Clearaudio

Clearaudio smart power 12V User manual

Clearaudio

Clearaudio Master Innovation User manual

Clearaudio

Clearaudio Performance DC User manual

Clearaudio

Clearaudio Ovation User manual

Clearaudio

Clearaudio Emotion User manual

Clearaudio

Clearaudio Jubilee MM User manual

Clearaudio

Clearaudio Unify User manual

Clearaudio

Clearaudio Innovation Compact User manual

Clearaudio

Clearaudio Statement User manual

Clearaudio

Clearaudio Master Solution User manual

Clearaudio

Clearaudio Emotion CMB Upgrade Kit User manual

Clearaudio

Clearaudio Statement V2 User manual

Clearaudio

Clearaudio Charisma V2.1 MM User manual

Clearaudio

Clearaudio Master Innovation User manual

Clearaudio

Clearaudio CMB-Bearing User manual

Clearaudio

Clearaudio Statement TT1 User manual

Popular Turntable manuals by other brands

Gemini

Gemini CDT-05 MKII product manual

Rotel

Rotel RP-820 owner's manual

Shuman

Shuman MC-250BT user manual

Stanton

Stanton STR8-150 owner's manual

Audio Technica

Audio Technica AT-LPW40WN user manual

Crosley

Crosley McQueen CR7011-GY instruction manual

Reloop

Reloop SMP-1 Operation manual

auna

auna TT-Classic Plus instruction manual

COMO AUDIO

COMO AUDIO Turntable Analog user manual

Dual

Dual 1009 F owner's manual

REED

REED Muse3C user manual

AXIOMTEK

AXIOMTEK OPS883-H Series Quick installation guide

Pioneer

Pioneer PL-71 operating instructions

Vestax

Vestax PDX-a1 owner's manual

Denon

Denon DP-400 owner's manual

Dual

Dual 504 Service manual

Audio-Techica

Audio-Techica AT-LP60XBT user manual

Goldring

Goldring G99 instruction manual