Clear One Delta User manual
DELTA MICROPHONE
XAP 800 Professional Conferencing System
Accentuates teleconferencing applications that demand high-quality
audio. The Delta Microphone features three wide-range boundary
microphones mounted together into a single base, providing the rich
sound of three individual unidirectional microphones while
maintaining full 360Þ coverage.
HIGH QUALITY PICKUP
WITH 360˚ COVERAGE
XAP 800 APPLICATIONS
Conference Rooms
Boardrooms
Distance Learning Centers
Training Rooms
Courtrooms
Hotel
DELTA MICROPHONE ADVANTAGES
Superior Audio Performance
+ 360Þ pick-up range with a dead zone above increases intelligibility
and reduces unwanted noise
+ Divides the room in thirds to eliminate reverberations and minimize
ambient noise pick-up
+ Provides great frequency response and dynamic range
Minimal Visibility
+ Sleek, low-profile design
+ Compact size: 1.06” x 8.76” (27 mm x 222.5 mm)
CONFERENCING MICROPHONES
DATA SHEET <
CONFERENCING MICROPHONES
DATA SHEET <
>CLEARONE LOCATIONS
Headquarters:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
800-945-7730
Fax: 801-977-0087
Latin America
Tel: 801-974-3621
EMEA
Tel: 44 (0) 1189 036 053
APAC
Tel: 801-303-3388
© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice.802-103-340 Revision 3.2
Dimensions
Microphone:
Height 1.06"/27 mm
Diameter 8.76"/222.5 mm
Bracket:
Height 1.4"/35.6 mm
Width 8.6"/218.4 mm
Depth 6.5"/165.1 mm
Weight
Microphone:
3.25 lb/1.37 kg shipping
Bracket:
1.5 lb/669g shipping
Element
Fixed-charge back plate permanently
polarized condenser
Polar Pattern
Half-cardioid (cardioid in hemisphere above
mounting surface)
Phantom Power Requirements
F5-52VDC, 2mA typical
Frequency Response
30Hz-20kHz
Sensitivity
-38dB (0dB = 1mW/1 Pa*)
Open Circuit Sensitivity
5.6mV (-45dB re 1V/1 Pa*)
Impedance
200
Maximum Input Sound Level
130dB, 1kHz at 1% THD
Signal/Noise Ratio
>65dB at 1kHz/1 Pa*
Cable and Connector Types
25'/7.6 m long, .209"/5.31 mm shielded cable
with 3-pin XLRM-type (phased) connectors *1
Pascal = 0 dynes/cm2 = 10 microbars
Part Number
910-103 -340 Delta Microphone
>SPECIFICATIONS
Table of contents
Other Clear One Microphone manuals
Clear One
Clear One BMA 360D User manual
Clear One
Clear One Beamforming Microphone Array 2 User manual
Clear One
Clear One AccuMic VC User manual
Clear One
Clear One Button Mic User manual
Clear One
Clear One PC User manual
Clear One
Clear One BFM2 User manual
Clear One
Clear One 910-001-013-W User manual
Clear One
Clear One TableTop User manual
Clear One
Clear One Beamforming Microphone Array 2 User manual
Clear One
Clear One BMA CT User manual
