Clarke LB7S Instruction Manual
OPERATION & MAINTENANCE
INSTRUCTIONS
LS0911
STAND FOR LOGBUSTER 7
MODEL NO: LB7S
PART NO: 3402047
LB7S Log Buster Stand.fm Page 1 Friday, September 16, 2011 4:25 PM
2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE Log Buster Stand.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SPECIFICATIONS
Model Number: LB7S
Part Number: 3402047
Dimensions (Stand only): 667 x 725 x 735 mm
Net Weight: 6.1 kg
LB7S Log Buster Stand.fm Page 2 Friday, September 16, 2011 4:25 PM
3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
PART IDENTIFICATION
UNPACKING
The following items should be supplied in the carton. If any parts are missing or
damaged, please consult your Clarke dealer where you purchased the stand.
1 1 x Wheel support beam LGLB7S01
2 1 x Cross beam LGLB7S02
3 2 x Vertical support column LGLB7S03
4 1 x Vertical support column with bracket (front) LGLB7S04
5 2 x Motor support brackets - left and right hand LGLB7S05
6 1 x Motor support cross-member LGLB7S06
7 1 x Fixings pack LGLB7S07
LB7S Log Buster Stand.fm Page 3 Friday, September 16, 2011 4:25 PM
4
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
ASSEMBLY
PREPARING THE LOG BUSTER
1. Remove the 4 nuts that secure the
front foot of the log buster and
remove the foot.
2. Remove the wheel hub using a flat
screwdriver.
3. Remove the circlip and the wheel.
• The wheels, circlips and hubs will
be attached to the log buster
frame later.
4. Look at the wheel mount / pump
cover assembly on the logbuster.
• If there is a hole as shown go to
step 9.
• if not you will need to purchase
a replacement wheel mount /
pump assembly cover from your
Clarke dealer part number
3402044 and go to step 5
5. To replace the wheel mount /
pump cover assembly. remove
the safety handle and the nut next
to it (shown on the right) from the
log buster.
LB7S Log Buster Stand.fm Page 4 Friday, September 16, 2011 4:25 PM
5
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
6. Remove any other nut/bolts that
are securing the wheel mount /
pump cover assembly to the log
buster.
7. Remove the wheel mount / pump
cover assembly and replace it
with the one you purchased.
8. Refit the safety handle and nuts
removed in steps 5 & 6.
9. Assemble the motor support
brackets as shown.
10. Fix the motor support bracket to
the new wheel mount / pump
cover assembly.
LB7S Log Buster Stand.fm Page 5 Friday, September 16, 2011 4:25 PM
6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
FRAME ASSEMBLY AND FIXING THE LOGBUSTER
1. Assemble the frame as shown.
2. Attach the wheels you removed
from the log buster to the log
buster stand.
3. Fix the vertical support columns to
the wheel mount / pump cover
assembly as shown.
• You may need someone to hold
the other end of the logbuster
whilst you do this.
4. Secure the front vertical support
column to the log buster using the
four fixings originally used to
secure the foot.
5. The logbuster is now ready for use.
MOVING THE LOG BUSTER
• Lift the log buster by the front
handle before moving it.
• Only use on a firm level surface.
LB7S Log Buster Stand.fm Page 6 Friday, September 16, 2011 4:25 PM
7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
NOTES
LB7S Log Buster Stand.fm Page 7 Friday, September 16, 2011 4:25 PM
LB7S Log Buster Stand.fm Page 8 Friday, September 16, 2011 4:25 PM
Table of contents
Other Clarke Rack & Stand manuals
Clarke
Clarke CSM4200 User manual
Clarke
Clarke CRSF2 User manual
Clarke
Clarke CSM5175 Series User manual
Clarke
Clarke LB5S Instruction Manual
Clarke
Clarke CTA150 User manual
Clarke
Clarke Strong-Arm CES450 User manual
Clarke
Clarke MCD1 Instruction Manual
Clarke
Clarke CES680F Owner's manual
Clarke
Clarke MDS1 User manual
Clarke
Clarke CARS1 Instruction Manual
Clarke
Clarke CAX3TBC User manual
Clarke
Clarke CUTS1 User manual
Clarke
Clarke CWR45B Programming manual
Clarke
Clarke CBS3 User manual
Clarke
Clarke CMSS User manual
Clarke
Clarke CWR45 Programming manual
Clarke
Clarke Strong-Arm CES680 Owner's manual
Clarke
Clarke CWC80B User manual
Clarke
Clarke CAX3TA User manual
Clarke
Clarke CWR1 User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
