INSTALLATION
Precautions
•Do not allow liquids or foreign objects to enter the WH105 RF
Transmitter or Headphones.
•If any unit should become wet, turn off all power and let your
authorzied Clarion Dealer clean
or
service the equipment.
DO
NOT ATTEMPT TO OPEN OR SERVICE THE RF
TRANSMITTER OR HEADPHONES. THE INTERNAL
PARTS ARE NOT USER-SERVICEABLE. DOING SO
WILL VOID THE WARRANTY.
•Do not drop or excessively
jar
the WH105 headpones.
•Do not use liquid cleaners on any surfaces. Only use asoft
(cotton or other non-static) cloth to wipe off fingerprints.
•Do not subject the unit to direct sunlight or
an
extremely hot
environment (e.g., closed windows on ahot summer
day,
direct path
of
heater vent, etc.)
•Avoid using the products under the following contitions:
-After extended parking on an extremely hot or cold day
-Near strong magnetic fields
-
In
an environment with excessive humidity, dust, or
vibration (e.g., off-road travel, etc.)
6
Wiring
•This unit operates on an automotive 12-volt negative ground
power source and requires additional mobile audio and video
components for proper operation.
•Before installation, disconnect the (-) negative lead from the
vehcile's battery.
•Attach the
RF
Transmitter to alocation near your A/V Source
with the provided adhesive tape.
•Connect the power and ground wire connectors
to
the 12Vdc
input. Connect black (-) wire to ground
of
the vehicle, and
red (+) wire to an accessory 12Vdc power source.
•Connect the audio input to alow-level output. With this
connection, only the volume control on the earphones needs
to
be
adjusted to control volume level.
