Claas AXION 850 C.I.S. User manual

CLAAS KgaA mbH

Postfach 1163, 33426 Harsewinkel

Tel. +49 (0)5247 12-0

www.claas.com

00 11 185 590

TRAKTOR

DE - 11.07

Printed in France

AXION 850-840-830-820-810 C.I.S.

Operator's manual

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

ABOUT THIS OPERATOR'S MANUAL

6543

This is the original operator's manual. It will simply be referred to as the "operator's manual" throughout this

document

This operator's manual complies with the regulations currently in force in the first country the tractor has been

delivered to.

This operator's manual contains the instructions for using, adjusting, servicing, cleaning and transporting the

tractor. It is essential to be familiar with all of these instructions in order to:

-Improve the performance of the tractor

-Increase the tractor's availability

-Extend the service life of the tractor

-Ensure the correct working conditions in terms of both safety and comfort

If any maintenance operations are missed or if the tractor is used incorrectly, the following is possible:

-An increased safety risk

-Premature wear of the tractor

-A reduction in tractor performance

-Loss of output and time

Have the tractor serviced regularly by an approved CLAAS distributor.

This operator's manual can be considered contractual. CLAAS has a policy of continuous technical improvement to

all its products, and therefore reserves the right to change without notice and at any time the details contained in

this operator's manual.

The description of the models contained in this operator's manual was established from technical specifications

known at the time this operator's manual was written. The operator's manual contains all of the equipment

(standard or optional) that exists for these models. The presence of this equipment in the tractor depends on the

tractor version and options chosen by the purchaser and the country of sale for this tractor.

Servicing operations during the warranty period are mandatory; failure to carry them out will nullify the contractual

warranty.

Failure to observe the instructions for use and maintenance of the tractor as described in this operator's manual

definitively excludes any possibility of recourse to the CLAAS warranty system.

The instruction and warning plates affixed to the tractor give important information about possible risks of use.

Following these instructions will guarantee your safety!

Front/rear tools have a separate operator's manual.

The CLAAS distribution network is available to respond to any questions that you may have relating to the content

of this operator's manual.

Important information concerning this operator's manual

Important information concerning this operator's manual appears at the end of the manual:

AXION 850-810 C.I.S. - 02/2012 - en 3

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

1 - Address of CLAAS company headquarters

2 - Phone number to call if necessary

3 - Address of CLAAS company website

4 - Reference of this operator's manual

5 - Designation of this operator's manual

6 - Language code for this operator's manual

7 - Publication date of this operator's manual

8 - Country where this operator's manual was printed

CLAAS KGaA mbH

Postfach 1163

33416 Harsewinkel

Tel. +49 (0)5247 12-0

www.claas.com

XX XXXX XXX X

OM XXXXX XXX

XX - XX/XXXX

Printed in France

000msn00gm

The reference, designation and publication date of this operator's manual also appear at the bottom of each page

of the operator's manual. The reference of the operator's manual should be quoted in any query concerning the

operator's manual and when ordering additional copies.

Classification into modules

The sections in this manual are categorised into modules, as far as the contents permit. The structure of these

modules is identical in each section.

The different product groups have different module structures. CLAAS always endeavours to retain these module

structures in each document.

Direction indications

Indications such as front, rear, right-hand and left-hand are always in the context of the direction of travel of the

tractor.

In the illustrations, the direction of travel may be indicated by a direction arrow.

Text and illustrations

Photos and graphics have been kept neutral wherever possible. If this is not the case, additional information is

added underneath the illustration.

Texts and illustrations have been kept neutral wherever possible. If this is not the case, the preceding subtitle takes

into account the differences.

Highlighting dangers and warnings

In the operator's manual, all points concerning personal safety and the safe use of the tractor are indicated by the

following symbols. Ensure that other users are also made aware of all safety advice.

4AXION 850-810 C.I.S. - 02/2012 - en

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

CAUTION

Instructions which must be strictly followed to prevent any risk of personal injury.

Important: Instructions which must be strictly followed to prevent damage to the tractor and its

environment.

Note: Instructions to be followed to ensure more efficient/suitable use of the tractor

Specific terminology

In this operator's manual, "tool" refers to any equipment hitched to the tractor, whether carried or towed.

Likewise, the term "risk zone" refers to all locations with an increased risk of accident.

-Around the tractor and the tools hitched to the tractor

-Between the tractor and the carried/towed tools

-In the deployment or movement area of the tools

Technical specifications

The technical specifications, dimensions and weights are provided on a non-binding basis. CLAAS reserves the

right to modify them as part of the technical development, subject to errors.

Optional and additional equipment

Optional equipment consists of tractor equipment variants. Different variants are available but only one can be

fitted at a time.

Additional equipment consists of tractor equipment variants which can be fitted as accessories but which are not

part of the tractor's standard equipment.

The two terms refer to the possible variants. Standard equipment and equipment variants may vary according to

the country.

AXION 850-810 C.I.S. - 02/2012 - en 5

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

VALIDITY OF THE INSTRUCTIONS

5543

This operator's manual is valid for the following tractors:

Type of tractor Tractor serial number

From To

AXION A3000050

The operator's manual describes the possible equipment for your tractor. Your tractor's equipment is listed in your

order confirmation.

6 AXION 850-810 C.I.S. - 02/2012 - en

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

UNITS

5639

The units used in this document are in line with international system of units:

Physical Unit Name Symbol of unity Multiples and sub-multi-

ples of the unit

Size Metre m mm - cm

Volume Cubic meter m³ cm³ - dm³

Liter l ml - cl

Angle Degree °

Time Second s

Minute min

Hour h

Linear speed Kilometer per hour km/h m/h

Rotation speed Revolution per minute 1/min

Weight Kilogram kg g

Forced Newton N

Torque Newton meter Nm

Pressure Pascal Pa

Power Watt W kW

Flow rate Liter per minute l/min

Temperature Degree Celsius °C

Power voltage Volt V mV

Electric intensity Ampere A mA

Resistor Ohm ΩkΩ

Sound level Bel B(A) dB(A)

The date format used in this document also complies with the international system:

Year-Month-Day Example: 2010-07-15

AXION 850-810 C.I.S. - 02/2012 - en 7

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

CHAPTER SYMBOLS

5887

REF CHAPTERS SYMBOLS

AIDENTIFICATION - CERTIFICATION - SAFETY

BCAB

CELECTRICAL SERVICES

DENGINE

ETRANSMISSION

FFRONT AXLE

GREAR EQUIPMENT

HFRONT EQUIPMENT

ICLAAS INFORMATION SYSTEM

JWHEELS AND TYRES

KCHARACTERISTICS

mm l

LMAINTENANCE

MOPERATIONS THAT ARE MANDATORY UNDER THE GUARAN-

TEE

8 AXION 850-810 C.I.S. - 02/2012 - en

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

CONTENTS

A - IDENTIFICATION - CERTIFICATION - SAFETY

1 TRACTOR INFORMATION PLATE ....................................................................................... A. 2

2 TRACTOR POWER LABEL ................................................................................................... A. 4

3 MOTOR INFORMATION PLATE ........................................................................................... A. 5

4 CAB IDENTIFICATION PLATE ............................................................................................. A. 6

5 EUROPEAN REGULATION ................................................................................................... A. 7

6 SAFETY .................................................................................................................................. A. 8

6.1 SAFETY INSTRUCTIONS ........................................................................................................ A. 8

6.2 SAFETY STICKERS WITH WARNING PICTOGRAMS ......................................................... A. 23

B - CAB

1 OPERATING AND WORKING ENVIRONMENT ................................................................... B. 2

1.1 INSTRUMENTS AND CONTROLS (DRIVING POSITION) ...................................................... B. 2

1.2 INSTRUMENTS AND CONTROLS (PANEL) ........................................................................... B. 4

1.3 STOWAGE AND ACCESSORIES ............................................................................................ B. 5

2 LIGHTING, INDICATORS AND SAFETY .............................................................................. B. 6

2.1 DESCRIPTION ......................................................................................................................... B. 6

2.2 LOW/HIGH BEAMS AND HORN .............................................................................................. B. 7

2.3 WORKING LIGHTS AND ROTATING BEACON ...................................................................... B. 8

2.4 OVERHEAD LIGHT .................................................................................................................. B. 9

2.5 REAR VIEW MIRRORS ............................................................................................................ B. 9

3 STARTING CONTACT ......................................................................................................... B. 11

4 MULTIFUNCTION ARMREST ............................................................................................. B. 12

5 SEATS .................................................................................................................................. B. 13

5.1 DRIVER'S SEAT ..................................................................................................................... B. 13

5.2 PASSENGER SEAT ............................................................................................................... B. 15

6 STEERING WHEEL ............................................................................................................. B. 17

7 INSTRUMENT PANEL ......................................................................................................... B. 18

7.1 DESCRIPTION ....................................................................................................................... B. 18

7.2 OPERATION ........................................................................................................................... B. 20

7.3 OPERATION ........................................................................................................................... B. 23

7.4 CALIBRATION ........................................................................................................................ B. 24

8 DISPLAY .............................................................................................................................. B. 25

8.1 TRANSMISSION DISPLAY .................................................................................................... B. 25

AXION 850-810 C.I.S. - 02/2012 - en

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

9 HINGED PANELS AND WINDOWS .................................................................................... B. 26

10 SIGHT ................................................................................................................................... B. 30

11 HEATING - VENTILATION - MANUAL AIR CONDITIONING ............................................. B. 31

11.1 DESCRIPTION ....................................................................................................................... B. 31

11.2 OPERATION ........................................................................................................................... B. 31

12 HEATING/VENTILATION/AUTOMATIC CLIMATE CONTROL .......................................... B. 36

12.1 DESCRIPTION ....................................................................................................................... B. 36

12.2 OPERATION ........................................................................................................................... B. 36

13 CAB SUSPENSION ............................................................................................................. B. 40

C - ELECTRICAL SYSTEM

1 CHARACTERISTICS ............................................................................................................. C. 2

2 TRAILER/IMPLEMENT LIGHT SOCKET .............................................................................. C. 3

3 ELECTRIC CABINET SUPPLY SOCKET ............................................................................. C. 5

4 EVENT COUNTER SOCKET ................................................................................................. C. 6

5 ISO SOCKET .......................................................................................................................... C. 7

6 ISOBUS SOCKET .................................................................................................................. C. 8

7 PROVISION FOR THE INSTALLATION OF A CONTROL CASING IN THE CAB ............... C. 9

7.1 FITTING BOX MOUNTING ....................................................................................................... C. 9

7.2 CABLE ROUTING ..................................................................................................................... C. 9

8 BATTERY ............................................................................................................................. C. 10

8.1 BATTERY COMPARTMENT .................................................................................................. C. 10

8.2 BATTERY MASTER SWITCH ................................................................................................ C. 11

9 FUSES AND RELAYS ......................................................................................................... C. 12

9.1 RECOMMENDATIONS ........................................................................................................... C. 12

9.2 CAB-MOUNTED SERVICES FUSE BOX ............................................................................... C. 12

9.3 CAB TOP FUSE BOX ............................................................................................................. C. 15

9.4 PRIMARY SERVICES FUSE BOX ......................................................................................... C. 18

D - ENGINE

1 CHARACTERISTICS ............................................................................................................. D. 2

2 DISPLAYS .............................................................................................................................. D. 4

2.1 INSTRUMENT PANEL .............................................................................................................. D. 4

3 SAFETY .................................................................................................................................. D. 5

3.1 OPERATION ............................................................................................................................. D. 5

3.2 INSTRUMENT PANEL .............................................................................................................. D. 5

3.3 RECOMMENDATIONS ............................................................................................................. D. 5

4 ENGINE HOOD ...................................................................................................................... D. 7

4.1 ONE-PIECE HOOD .................................................................................................................. D. 7

4.2 SIDE PANELS .......................................................................................................................... D. 7

AXION 850-810 C.I.S. - 02/2012 - en

Find manuals at http://best-manuals.com/search?&s=CLA-11210875

This manual suits for next models

Table of contents

Other Claas Tractor manuals

Claas

Claas ARES 547 User guide

Claas

Claas ARION 510 User guide

Claas

Claas AXION 840 CMATIC User manual

Claas

Claas JAGUAR Series Installation guide

Claas

Claas ARION 600 Operating instructions

Claas

Claas CELTIS 426 User manual

Claas

Claas ARES 547 User guide

Claas

Claas ARES 546 User guide

Popular Tractor manuals by other brands

Ariens

Ariens 936051 Operator's manual

MacDon

MacDon M150 Assembly instructions

Belarus

Belarus 3522.5 Operator's manual

CARRARO

CARRARO Vigneto Operator's manual

Cub Cadet

Cub Cadet 3208 Operator's manual

GREMO

GREMO 1250F Workshop manual

HATTAT

HATTAT A90 Service manual

Kubota

Kubota WSM STV32 Workshop manual

Kubota

Kubota M108DC Operator's manual

Case

Case 385 Diesel Shop Manual

AL-KO

AL-KO Heritage RS 14/82 Instruction book

Webb

Webb WE1742SD Original instructions

MacDon

MacDon 9250 Operator's manual

Toro

Toro 03200 Reelmaster 3100-D Operator's manual

MASSEY FERGUSON

MASSEY FERGUSON 5400 Series Service manual

Kubota

Kubota T1880 Operator's manual

Case

Case JX 90 Operator's manual

Iseki

Iseki TXG23 user manual