CLA-VAL 134E-83 User manual

CLA-VAL 134E/D-83

Deluge Solenoid Control Valve, Equipped with Manual

Bypass Valve and Pressure Reducing Feature

CLA-VAL Europe www.cla-val.ch [email protected] 1-134083CE D 04/23

Operating data

1.1 SOLENOID CONTROL FEATURE

Solenoid control 311-D (2A) or 311-C (2B) is direct acting, 3-way solenoid control that changes position when the coil is

energized or de-energized. This applies or relieves pressure in the cover chamber of auxiliary valve 100-KHR (3) providing

the operations shown in the following table:

134E-83

Solenoid 311-D (2A) Auxiliary valve (3) Main valve (1)

State Ports connected Position Position

Energized 1 - 2 Open Open under command

of control (6)

De-energized 0 - 1 Closed Closed

134D-83

Solenoid 311-C (2B) Auxiliary valve (3) Main valve (1)

State Ports connected Position Position

Energized 2 - 1 Closed Closed

De-energized 1 - 0 Open Open under command

of control (6)

Note: Solenoid control (2) may be equipped with a manual actuator which can be used to operate the solenoid without

electrical power. After manual actuation, always return the actuator to its original position or the solenoid will not return to the

de-energized position.

1.2 MANUAL BYPASS OF SOLENOID FEATURE

Open isolation ball valve RB-117 (5) to bypass both solenoid control (2A) or (2B) and auxiliary valve (3). This relieves

pressure in the main valve cover, thereby, opening the main valve (1) under command of pressure reducing control CRD (6).

Isolation ball valve (5) must be closed during normal operation.

1.3 PRESSURE REDUCING FEATURE

Pressure reducing control CRD (6) is a normally open control that senses main valve outlet pressure changes. An increase

in outlet pressure tends to close control (6) and a decrease in outlet pressure tends to open control (6). This causes main

valve cover pressure to vary and the main valve (1) modulates (opens and closes) maintaining a relatively constant outlet

pressure.

Pressure reducing control (6) adjustment: Turn the adjusting screw clockwise to increase the setting.

CLA-VAL 134E/D-83

Deluge Solenoid Control Valve, Equipped with Manual

Bypass Valve and Pressure Reducing Feature

CLA-VAL Europe www.cla-val.ch [email protected] 2-134083CE D 04/23

1.4 OPTIONAL FEATURES

No (A) - self-cleaning strainer:

The self-cleaning strainer CLA-VAL, type X46A (A) is at the inlet of the main valve (1) screwed. The assembly of the self-

cleaning strainer (A) removes the assembly of an external filter.

The check of the self-cleaning strainer (A) is requesting its removal from the main valve body (1).

No (C) - Closing speed:

Flow control CV (C) controls the closing speed of the main valve (1).

Flow control (C) adjustment: Turn the adjusting screw clockwise to make the main valve (1) close slower.

No (F) - Remote sensing:

Remote sensing is obtained from a point upstream of the main valve (1) inlet, by a pipe size Ø 12 mm (not furnished by

CLA-VAL Europe), which must not have any high points and so formation of air pockets and avoid any pulsation of control.

Note: Independent operating pressure must be equal to or greater than pressure at the main valve inlet at all times.

No (M) - Remote hydraulic control / emergency opening on site:

Open manual valve RB-117 (M) to by-pass the action of the solenoid valve (2). The main valve (1) opens fully.

Note: By-pass manual control valve (M) must be closed during normal operation.

No (S) - Opening speed control:

Flow control CV (S) controls the opening speed of the main valve (1).

Flow control (S) adjustment: Turn the adjusting screw clockwise to make the main valve (1) open slower.

No (Y) - Strainer:

A strainer X43 (Y) is installed in the pilot supply line to protects the pilot system from foreign particles. The strainer (Y)

screen must be cleaned periodically.

1.5 CHECK LIST FOR PROPER OPERATION

□System valves open upstream and downstream.

□Air removed from the main valve cover and pilot system at all high points.

□Isolation ball valve (5) closed during normal operation.

□Periodical checking of the self-cleaning strainer [optional feature (A)].

□Emergency manual control valve [optional feature (M)] closed.

□Periodical cleaning of the filter screen [optional feature (Y)].

□Flow controls [optional feature (C) and (S)] open at least 1 turn.

□Correct voltage to solenoid control (2A) and (2B).

□Manual operator of solenoid control (2A) and (2B) disengaged.

□Remote control line properly connected [optional feature (F)].

This manual suits for next models

Other CLA-VAL Control Unit manuals

CLA-VAL

CLA-VAL 636-03 Owner's manual

CLA-VAL

CLA-VAL 60-73 User manual

CLA-VAL

CLA-VAL 90-01 Guide

CLA-VAL

CLA-VAL 92-01 Owner's manual

CLA-VAL

CLA-VAL 40-01/640-01 Owner's manual

CLA-VAL

CLA-VAL 92-07 Owner's manual

CLA-VAL

CLA-VAL 90G-21 UL Instruction manual

CLA-VAL

CLA-VAL 34AR Series User manual

CLA-VAL

CLA-VAL 49-01 Installation and operating instructions

CLA-VAL

CLA-VAL 90-48 Owner's manual

CLA-VAL

CLA-VAL 90-21 Owner's manual

CLA-VAL

CLA-VAL 340-07 General instructions

CLA-VAL

CLA-VAL 90G-21 Instruction manual

CLA-VAL

CLA-VAL 590-01 Owner's manual

CLA-VAL

CLA-VAL 50B-5KG Installation and operating instructions

CLA-VAL

CLA-VAL 581 Owner's manual

CLA-VAL

CLA-VAL 136-AU User manual

CLA-VAL

CLA-VAL 60-31 General instructions

CLA-VAL

CLA-VAL 50-01 Installation and operating instructions

CLA-VAL

CLA-VAL 750-20 Owner's manual

CLA-VAL

CLA-VAL 750B-4KG1 Owner's manual

CLA-VAL

CLA-VAL 43-01/643-01 User manual

CLA-VAL

CLA-VAL 81-02/681-02 Owner's manual

CLA-VAL

CLA-VAL 60-73 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual