Citizen Eco-Drive E76 User manual

表3表2

B8043-3

Model No.BL1＊

Cal.E76＊

CTZ-B8043③

CTZ-B8043 Cal.E76

＊INSTRUCTION MANUAL

ENGLISH

DEUTSCH

FRANÇAIS

ESPÑOL

ITALIANO

PORTUGÊS

中文（繁体字）

中文（簡体字）

CONTENTS

1. Features ......................................................................................................4

2. Before Using ..............................................................................................5

3. Setting the Time and Date ........................................................................6

* Setting the Time

* Setting the Date

* Correcting the Time Difference

4. Functions Unique to Eco-Drive Watches ..............................................18

* Insufcient Charge Warning Function

* Time Setting Warning Function

* Overcharging Prevention Function

* Power Save Function

5. General Reference for Charging Times ................................................23

6. Notes Regarding Handling of this Watch .............................................24

* Charging Precautions

7. Replacing the Rechargeable cell ............................................................25

8. All-Reset ...................................................................................................26

9. Reference Position Alignment ...............................................................28

10. Precautions ............................................................................................30

11. Specications .........................................................................................36

Fig.1 Fig.2

Crown Operation

–Models Equipped with a Crown Cover–

Insert your fingernail between the case and crown cover and

open the crown cover so that it opens to the outside.

* Always make sure to close the crown cover after operating the

crown.

<Important Point when Turning the Crown for Setting

Time and Date, Correcting Time Difference or Setting

Reference Position>

Although the crown can be operated by

turning while pinching between your ﬁngers

or fingernails (Fig. 1), the crown can be

turned more easily by turning while pressing

against the crown with the thick portion of

your ﬁnger (Fig. 2).

* Please refer to the manual for information

on the procedures for setting the time and

date, correcting time difference and setting

the reference position.

This watch is a solar-powered watch that contains a solar cell in its face that

drives the watch by converting light energy into electrical energy.

It is equipped with numerous functions including a perpetual calendar that

changes the date automatically (day, month and year change automatically through

February 28, 2100 even in leap years), a time difference correction function that

makes it possible to easily change the time difference without stopping the watch,

and a power save function that reduces current consumption when the solar cell is

not exposed to light.

1. Features

A rechargeable cell is used in this watch to store electrical energy. This

rechargeable cell is a clean energy battery that does not contain mercury or other

toxic substances. Once fully charged, the watch circuit will continue to keep time

for about 5 years without additional charging (when the power save 2 function is

operating).

To use this watch comfortably, make sure to recharge it before it stops running

completely. Since there is no risk of overcharging (Overcharging Prevention

Function) no matter how much the watch is charged, it is recommended that the

watch be recharged everyday.

This watch is a solar-powered watch. Make sure to charge the watch prior

to use by adequately exposing it to light.

2. Before Using

If the watch is provided with a cover, open the cover to set the time or date, and

then close the cover once the time or date has been set.

[Setting the Time]

1. When the crown is pulled out to the second click (time setting position), the

second hand rapidly advances to the 0 seconds position and stops.

Note: Align the hands at the reference position after performing the all-reset

procedure when the second hand does not stop at the 0 seconds position.

2. Turn the crown and set the time.

(0) Normal position

and time difference

correction position

(1) Date correction position

(2) Time setting position

Date

Seconds (number of

years elapsed since the

most recent leap year

and month during date

correction)

3. Setting the Time and Date

BUTTON

(A)

(1) When the crown is turned to the right, the hour and minute hands move

forward (clockwise).

(2) When the crown is turned to the left, the hour and minute hands move

backward (counter-clockwise).

* Turning the crown continuously causes the hands to advance rapidly. Turn

the crown to either the left or right to stop the hands from advancing rapidly.

Note (1): When correcting in the forward direction, the date changes when the

hour and minute hands indicate 12:00 AM. However, when the date

is changed in the case the hands are advancing rapidly, the hour and

minute hands pause at 12:00 AM and then resume advancing rapidly

after the date has changed.

(2): When correcting in the backward direction, the date does not change

even if the hour and minute hands pass 12:00 AM.

3. Return the crown to the normal position in synchronization with a telephone

time signal or other time service.

[Setting the Date]

This watch is provided with a perpetual calendar function. Once it is set, the year,

month and date change automatically, including leap years.

1. When the crown is pulled out to the ﬁrst click (calendar correction position), the

second hand moves to the year and month position stored in memory and stops.

2. Turn the crown and set the date.

(1) Turn the crown to the right to set the second hand to the position

corresponding to the year (number of years elapsed since the most recent

leap year) and month. Turning the crown continuously causes the second

hand to advance rapidly.

Examples:

* In the case of December in a leap year: Align the second hand at 0 seconds.

* In the case of April in a year that is three years after the most recent leap

year: Align the second hand at 23 seconds (between 4:00 and 5:00).

(2) The date is advanced by one day if the crown is turned to the left.

* Turning the crown continuously causes the date to be advanced continuously.

Turn the crown to either the left or right to stop the date from advancing

continuously.

3. Always make sure to return the crown to the normal position after setting the

date

The second hand advances to the current seconds and the hands begin to move.

The date can be set easily by stopping advancing the date rapidly two to three

days before the correct date and then advancing the date one day at a time.

The date automatically changes to the ﬁrst day of the following month when the

crown is returned to the normal position from the date correction state.

Examples:

* Normal Years:

March 1 when the date has been set to February 29, 30 or 31

October 1 when the date has been set to September 31

* Leap Years:

March 1 when the date has been set to February 30 or 31

October 1 when the date has been set to September 31

Table of contents

Other Citizen Watch manuals

Popular Watch manuals by other brands

Pandora

Pandora WATCH2 quick guide

Casio

Casio QW-4343 Service manual

Suunto

Suunto X6 user guide

Seiko

Seiko N830 instruction manual

MotionX

MotionX 365 user guide

Garmin

Garmin VENU SQ 2 owner's manual

QCY

QCY Watch GTC manual

Canyon

Canyon Cindy CNE-KW41WP quick guide

Esq

Esq Watches Operating instructions warranty & service guide

Crane

Crane AA5-CDSM-3A user manual

Timex

Timex W-214 product manual

DETOMASO

DETOMASO MATERA manual

Geemarc

Geemarc Watch N Shake user guide

LORUS

LORUS W590 instruction manual

STENLILLE

STENLILLE Actío user manual

Casio

Casio 5594 Operation guide

Sinn

Sinn HUNTER'S WATCH 3. Edition manual

Slazenger

Slazenger SLZ800 manual