M7208, M7208N, M7310, M7310N, M7324, T7208, T7316, and T7406 CITELlink Phone Quick Reference
What’s Different
•PressSUPERKEY to access a menu that allows you to program speedcalls, personal keys, and to turn on
and turnoff features. Press the Yes and No softkeysto navigate through the SUPERKEYmenu. For phones
without softkeys, use ∗(Yes) and #(No) on the dial pad.
• During a handsfree call if the Microphone indicator is on, the Microphone is on. If the indicator is off, the
Microphone is muted. Press the Microphone key to turn the microphone on and off.
Using Your Phone
Hold Press Hold to place call on hold
To retrieve the call, press the flashing line key
Transfer 1.While on a call, press Trans/Conf.
2.Dial the number of a third party.
3.Do one of the following:
• Hang up
• Wait for an answer, announce the transfer, and
hang up
Conference 1.While on a call, press Trans/Conf
2.Dial number of next party
3.Wait for answer
4.Press TransConf
Redial last number that you dialed 1.Lift the handset.
2.Press Redial.
Set call forwarding 1.Press SUPERKEY
2.Press No until "Call Forwarding?" appears
3.Press Yes
4.Press Next until desired Call Forwarding type
appears
5.Press Review
6.If a number is already programmed, press Change
7.Press Program
8.Dial the destination number
9.Press Save
10.Press SUPERKEY
Enable or disable call forwarding 1.Press SUPERKEY
2.Press No until "Call Forwarding?" appears
3.Press Yes
4.Press Next until the desired type of forwarding
appears
5.Press Review
6.Press Change
7.Press TurnOn or TurnOff
8.Press SUPERKEY
Program a personal speed call 1.Press SUPERKEY
2.Press No until "Personal Keys?" appears
3.Press Yes
4.Press a personal key that isn’t a line key
5.Press Change
6.Press Yes
7.Dial number (press HOLD for a pause; TRANS/
CONF for a flash)
8.Dial the destination number
9.Press Save
10.Press SUPERKEY
Speed call a saved number Press the speed call key.
