Cisco WAP351 Guide

Reboot and Reset Factory Default Settings on

the WAP351

Objective

Rebooting a device is used to shut down and restart the device with a saved configuration.

The factory default is used to restore the factory default configuration on the device to

remove any previous configurations.

The objective of this document is to show you how to reboot your WAP351 device and reset

it to the factory default.

Applicable Devices

• WAP351

Software Version

• 1.0.0.39

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press and hold the Reset button located at the back of the device for approximately

ten seconds with a pin.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log into the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the Power button to turn off the device. After 10 seconds have passed, press

the Power button a second time to power the device back on.

The Access Point reboots.

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login Page appears. Login with the saved administration credentials.

Other manuals for WAP351

1

Table of contents

Other Cisco Wireless Access Point manuals

Cisco

Cisco Aironet 1400 Series User manual

Cisco

Cisco MERAKI MR66 User manual

Cisco

Cisco 15454-GBIC-LX= - 1000 Mbps GBIC Expansion... Manual

Cisco

Cisco Aironet 1815w User manual

Cisco

Cisco Linksys WAP55AG User manual

Cisco

Cisco Aironet AIR-AP1200 Manual

Cisco

Cisco Aironet 2800I Series User manual

Cisco

Cisco Meraki MR52 Manual

Cisco

Cisco Aironet 1250 Series User manual

Cisco

Cisco MERAKI MR46E-HW Manual

Cisco

Cisco Aironet 1530 Series Manual

Cisco

Cisco Aironet LAP1522 Manual

Cisco

Cisco Catalyst Wireless 9163E User manual

Cisco

Cisco Aironet 1260 Series User manual

Cisco

Cisco WAP351 User manual

Cisco

Cisco Small Business WAP551 User manual

Cisco

Cisco WAP2000 User manual

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Instruction Manual

Cisco

Cisco MERAKI MR34 User manual

Cisco

Cisco MERAKI MR72 User manual

Cisco

Cisco Meraki MR42 User manual

Cisco

Cisco Catalyst 9130AX Series User manual

Cisco

Cisco WAP121 Instruction Manual

Cisco

Cisco Aironet 1200 Series Installation and operation manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide