Cisco CVR100W User manual

Quick Start Guide

Cisco Small Business

CVR100W Wireless-N VPN Router

Package Contents

•CVR100W Wireless-N VPN Router

•Power Adapter and EU/UK/KR Power Clips

•Quick Start Guide

•Ethernet Cable

•Pointer Card with Product Warranty

•Technical Support Contacts

2 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

Welcome

Thank you for choosing the Cisco CVR100W Wireless-N VPN Router. The

CVR100W provides simple, affordable, secure business-class connectivity

to the Internet for small office/home office (SOHO) and remote

professionals.

This guide describes how to physically install your CVR100W and launch

web-based Configuration Utility to configure and manage your CVR100W.

For additional information, see www.cisco.com/go/cvr100w.

CVR100W Features

Front Panel

• Do-Not-Disturb Mode Button—Turns on or turns off the LEDs on the

front panel. Turning this button on or off will not affect the normal

operation of the unit. When this button is turned on, all LEDs on the front

panel are off and the Do-Not-Disturb Mode LED on the back panel is

solid green. When this button is turned off, all LEDs on the front panel are

on and the Do-Not-Disturb Mode LED is off.

•WPSButton—Configures wireless access for devices in your network

that are WPS-enabled.

• Wireless Button—Enables or disables the wireless module of the unit.

•LANLEDs(1-4)—The numbered LEDs correspond to the LAN ports on

the back panel. Solid green when the unit is connected to a device

through the corresponding LAN port (1, 2, 3, or 4). Flashes green when

the unit is sending or receiving data over the LAN port. Off when the

LAN port has no connection.

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 3

•WPSLED—Solid green when the WPS connection is configured.

Flashes green when the WPS connection is in progress or the WPS

process is experiencing problems. Off when the WPS process finishes

or there is no WPS connection.

•WLANLED—Solid green when the wireless module is enabled with

100% Wi-Fi power. Solid amber when the wireless module is enabled

with 50% Wi-Fi power. Flashes green when the unit is sending or

receiving data on the wireless module. Off when the wireless module is

disabled.

•WANLED—Solid green when the unit is connected to the Internet

through your cable or DSL modem. Flashes green when the unit is

sending or receiving data through the WAN port. Off when the WAN

port has no connection.

•POWERLED—Solid green when the unit is powered on and is

operating normally. Flashes green when the system is booting or is

upgrading the firmware. Off when the unit is powered off.

Back Panel

•WANPort—The WAN (Internet) port is connected to your Internet

device, such as a cable or DSL modem.

•LANPorts(1-4)—These ports provide a LAN connection to network

devices, such as PCs, print servers, or switches.

•RESETButton—The RESET button has two functions:

–Reboot—Press the RESET button for at least 1 but no more than 5

seconds with a pencil tip to reboot the unit.

–Reset to Factory Defaults—Press and hold the RESET button for

more than 5 seconds to reboot the unit and restore the factory

defaults. Changes that you have previously made to the unit

settings are lost.

• 12VDC Jack—This jack is where you connect the power adapter (12 V/

0.5 A).

•POWEROn/OffButton—Press this button to power the unit on and off.

4 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

• Do-Not-Disturb Mode LED—Solid green when the Do-Not-Disturb

Mode button on the front panel is turned on and the unit is operating

normally. Flashes green when the Do-Not-Disturb Mode button is turned

on but the Internet connection has problems. Off when the Do-Not-

Disturb Mode button is turned off.

Mounting the CVR100W

You can place your CVR100W on a desktop or mount it on a wall.

Placement Tips

• Ambient Temperature—To prevent the unit from overheating, do not

operate it in an area that exceeds an ambient temperature of 104°F

(40°C).

•AirFlow—Be sure that there is adequate air flow around the unit.

• Mechanical Loading—Be sure that the unit is level and stable to avoid

any hazardous conditions.

Place the unit on a flat surface so that it sits on its four rubber feet.

Wall Mounting

The CVR100W can be wall-mounted. The wall-mounting hardware is

user-supplied. The ports on the back panel must face either upward or

downward when mounting the unit to a wall.

WARNING Insecure mounting might damage the device or cause injury.

Cisco is not responsible for damages incurred by insecure

wall-mounting.

Connecting the CVR100W

NOTE The wireless module of the CVR100W is enabled by default. You

can connect one PC with an Ethernet cable or through a wireless

connection to perform the initial configuration. Use the default SSID

name and pre-shared key that are provided on the label at the bottom of

the unit to connect the PC to your wireless network for the first time.

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 5

STEP 1Power off all equipment, including the cable or DSL modem, the PC

that you will use to connect to the CVR100W, and the CVR100W.

STEP 2Connect the supplied power adapter to the 12VDC jack on the

back panel. Plug the other end of the power adapter into an

electrical outlet. Make sure that the POWER button is turned off.

CAUTION Use only the power adapter that is supplied with the unit.

Using a different power adapter could damage the unit.

STEP 3Connect one end of an Ethernet cable to your cable or DSL

modem. Connect the other end to the WAN port on the back panel.

STEP 4Connect one end of a different Ethernet cable to one of the LAN

ports on the back panel. Connect the other end to an Ethernet port

on the PC that you will use to run web-based Configuration Utility.

NOTE Skip this step if you want to connect the PC to the CVR100W

through a wireless connection.

STEP 5Power on all connected devices including the cable or DSL

modem and the PC and wait until the connections are active.

STEP 6Press the POWER button on the back panel to power on the unit.

STEP 7To connect the PC to your wireless network for the first time, you

can configure the wireless connection using the default SSID name

and pre-shared key that are provided on the product label.

A sample configuration is illustrated here.

Internet

Access

Device

Power

Supply

Local

Network

Devices

Wireless

Devices

6 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

Getting Started with the Configuration

The Setup Wizard and web-based Configuration Utility are supported on

Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, Apple

Safari 3.0 or later, and Google Chrome 5.0 or later.

To log in to web-based Configuration Utility and complete the initial

configuration by using the Setup Wizard:

STEP 1Connect a PC to an available LAN port on the back panel and power

on the PC. Your PC will become a DHCP client of the CVR100W.

STEP 2Start a web browser. In the address bar, enter the default IP

address of the CVR100W: 192.168.1.1.

NOTE If the default IP address of the CVR100W conflicts with

another device (such as ADSL modem or cable modem) on the

same network, its default IP address will be automatically changed

to 10.10.10.1. You must use the new default IP address to log in to

the utility when IP address conflict occurs.

STEP 3When the login page appears, choose the language that you prefer

to use in the utility and enter the username and password.

The default username is cisco. The default password is cisco.

Usernames and passwords are case sensitive.

STEP 4Click Log In. The Setup Wizard will now launch.

STEP 5Follow the on-screen prompts to complete the initial configuration.

For security purposes, change the default password as instructed

by the Setup Wizard to prevent unauthorized access.

After the initial configuration is complete, go to the Advanced

Settings pages to configure other advanced features. You are

required to log in to the utility again with the new password. See

the help pages or the Cisco CVR100W Wireless-N VPN Router

Administration Guide for more information on configuring the

advanced features.

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 7

Where to Go From Here

WARNING This equipment is home use (Class B) electromagnetic wave

suitability equipment and to be used mainly at home and it can

be used in all areas.

Support

Cisco Small Business

Support Community

www.cisco.com/go/smallbizsupport

Cisco Small Business

Support and Resources

www.cisco.com/go/smallbizhelp

Phone Support Contacts www.cisco.com/go/sbsc

Cisco Small Business

Firmware Downloads

www.cisco.com/go/smallbizfirmware

Select a link to download firmware for Cisco

Small Business Products. No login is

required.

Product Documentation

Cisco CVR100W www.cisco.com/go/cvr100w

Cisco Small Business

Cisco Partner Central for

Small Business (Partner

www.cisco.com/web/partners/sell/smb

Cisco Small Business

Home

www.cisco.com/smb

이 기기는 가정용(B급)전자파적합기기로서 주

로 가정에서 사용하는 것을 목적으로 하며,모 든 지역에서사용할

수 있습니다.

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Small Business Support, Global: www.cisco.com/go/sbsc

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates

in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:

www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their

respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (1110R)

Printed in China PRC

78-21358-01

Other manuals for CVR100W

Table of contents

Other Cisco Network Router manuals

Cisco

Cisco ASR 5000 Operating and maintenance manual

Cisco

Cisco 3800 Series User manual

Cisco

Cisco RV042 - Small Business Dual WAN VPN Router User manual

Cisco

Cisco Linksys E1550 Quick start guide

Cisco

Cisco IR809 User manual

Cisco

Cisco Universal Broadband Router uBR7200 Manual

Cisco

Cisco NCS 540 Series User manual

Cisco

Cisco ASR 9000 Series User manual

Cisco

Cisco ME-C6524GS-8S User manual

Cisco

Cisco RV340 Series Quick start guide

Cisco

Cisco Linksys RVL200 User manual

Cisco

Cisco NCS 540 User manual

Cisco

Cisco NM-8B-U - HW ROUTERS L-M User manual

Cisco

Cisco Catalyst 3550 Series User manual

Cisco

Cisco 2524 - Router - EN User manual

Cisco

Cisco ASR 900 Series User manual

Cisco

Cisco 1712 - Security Access Router Manual

Cisco

Cisco Card Cage and Backplane 7513-MX User manual

Cisco

Cisco 2911 User manual

Cisco

Cisco SCE8000 GBE User manual

Cisco

Cisco 12016 Guide

Cisco

Cisco 1760V User manual

Cisco

Cisco 3800 Series User manual

Cisco

Cisco 2524 - Router - EN User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

EnGenius

EnGenius ESR-9710 quick start guide

LevelOne

LevelOne FBR-1416 user manual

Dynacord

Dynacord Promatrix 6000 Operation manual

Lorex

Lorex F5D8230-4 Guide