Cisco 850 Series User manual
CHAPTER
1-1
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
1
Cisco 850 Series and Cisco 870 Series
Access Routers Cabling and Setup
Quick Start Guide
Contents
•Cisco One-Year Limited Hardware Warranty Terms, page 1-2
•Locate the Product Serial Number, page 1-4
•Before Installation, page 1-4
•Connect the Antenna to the Wireless Router (Optional), page 1-8
•Connect the Power-over-Ethernet Module to the Cisco 870 Series Router
(Optional), page 1-10
•Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers,
page 1-12
•Connect the Router, page 1-17
•Install SDM and Configure the Router, page 1-19
•Related Documentation, page 1-20
•Obtaining Documentation, page 1-21
•Documentation Feedback, page 1-22
•Cisco Product Security Overview, page 1-23
English
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Cisco One-Year Limited Hardware Warranty Terms
1-2
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
•Obtaining Technical Assistance, page 1-24
•Obtaining Additional Publications and Information, page 1-27
Cisco One-Year Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services
that you can use during the warranty period. Your formal Warranty Statement,
including the warranties and license agreements applicable to Cisco software, is
available on Cisco.com. Follow these steps to access and download the Cisco
Information Packet and your warranty and license agreements from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that the part
number 78-5235-03A0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the
Information Packet appears.
d. Read the document online, or click the PDF icon to download and print
the document in Adobe Portable Document Format (PDF).
Note You must have Adobe Acrobat Reader to view and print PDF
files. You can download the reader from Adobe’s website:
http://www.adobe.com
3. To read translated and localized warranty information about your product,
follow these steps:
a. Enter this part number in the Warranty Document Number field:
78-10747-01C0
b. Select the language in which you would like to view the document.
1-3
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Cisco One-Year Limited Hardware Warranty Terms
c. Click Go.
The Cisco warranty page appears.
d. Read the document online, or click the PDF icon to download and print
the document in Adobe Portable Document Format (PDF).
You can also contact the Cisco service and support website for assistance:
http://www.cisco.com/public/Support_root.shtml.
Duration of Hardware Warranty
One (1) Year
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a
replacement part within ten (10) working days after receipt of a Return Materials
Authorization (RMA) request. Actual delivery times can vary, depending on the
customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty
remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from whom you purchased the product. If you purchased the
product directly from Cisco, contact your Cisco Sales and Service Representative.
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Locate the Product Serial Number
1-4
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Locate the Product Serial Number
The serial number label for the router is located on the rear of the chassis, above
the Ethernet LAN ports. (See Figure 1-1.)
Figure 1-1 Product Serial Number Location
Before Installation
•Check Items Shipped with the Router
•Nonwireless Routers
•Read the Safety Warnings and Guidelines
•Remove the Caution Sticker
Check Items Shipped with the Router
Table 1-1 lists the quantity of the items that are shipped with each router model in
the Cisco 850 series and the Cisco 870 series routers. Figure 1-2 depicts the
items.
Verify that the items listed in Table 1-1 were shipped with the router. If any of the
items is missing or damaged, contact your customer service representative.
1-5
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Before Installation
Table 1-1 Items Shipped with Cisco 850 Series and Cisco 870 Series Routers
Item
Cisco 851 and
Cisco 871
Cisco 857 and
Cisco 877 Cisco 876 Cisco 878
Ethernetcable(straight-through)1111
DSL1cable
1. DSL = digital subscriber line. Used for an asynchronous digital subscriber line (ADSL) or multirate symmetrical
high-data-rate digital subscriber line (G.SHDSL).
Not applicable 12
2. An RJ-11-to-RJ-11 straight-through cable is shipped, unless an RJ-11-to-RJ-11 crossover cable is specified.
13
3. An RJ-11-to-RJ-11 straight-through cable is shipped, unless an RJ-11-to-RJ-11 crossover cable or an RJ-11-to-RJ-45 cable
is specified.
13
ISDN4S/T cable
4. ISDN = Integrated Services Digital Network.
Not applicable Not applicable Optional Optional
Consolecable 1111
Console-auxiliary5cable
5. Console-auxiliary cable is used to connect the router console port to an asynchronous modem for dial backup or remote
management.
Optional Optional Optional Optional
Poweradapter 1111
Power cord6
6. Power cords are ordered as applicable to country or geographic region.
1111
Cisco documentation7
7. Includes the Regulatory Compliance and Safety Information for Cisco 800 Series Routers document and the Cisco 850 Series
and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide (this document). Also includes the Declarations
of Conformity and Regulatory Information for Cisco Access Products with 802.11a/b/g and 802.11b/g Radios document for
wireless models.
1 1 1 1
Cisco Router and Security
Device Manager (SDM)
software CD
1111
Swivel-mount dipole antenna
(wireless router models only)
Cisco 851:
1 antenna
Cisco 871:
2 antennas
Cisco 857:
1antenna
Cisco 877:
2 antennas
22
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Before Installation
1-6
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Figure 1-2 Items Included with the Cisco 850 Series and Cisco 870 Series Routers
The following cables are not included with the router. You need to order them
separately.
•Modem cable—For connecting the router console port to an asynchronous
modem for dial backup and remote management.
•Orange ISDN S/T cable—For connecting devices to the ISDN S/T port.
Caution Both LAN and WAN ports can use RJ-45 connectors. Use caution when
connecting cables to these connectors. To avoid damage to the router, do not
connect telephone-network voltage (TNV) circuits (such as ISDN or DSL
circuits) to safety extra-low voltage (SELV) circuits (such as LAN circuits).
1Yellow Ethernet cable 5Black power cord for adapter
2Lavender DSL cable (optional) 6Product documentation
3Light blue console cable 7Cisco SDM software CD
4Router power adapter 8Swivel-mount dipole antenna (wireless router
models only)
6
7
120730
5
2
3
48
1-7
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Before Installation
Nonwireless Routers
Portions of this guide do not apply to nonwireless models of the Cisco 850 series
and Cisco 870 series routers. Some illustrations show the router with antennas
attached, whereas the nonwireless routers do not have antennas or antenna
connectors on the back panel. However, except for the “Connect the Antenna to
the Wireless Router (Optional)” section, the connection procedures are the same
for wireless and nonwireless router models.
Read the Safety Warnings and Guidelines
Before you begin to connect your router, read the Regulatory Compliance and
Safety Information for Cisco 800 Series Routers document that is shipped with the
router. This document provides important safety warnings and guidelines.
Remove the Caution Sticker
Locate the yellow caution label that covers the LAN ports. Simply peel off the
label and the LAN ports are ready for use. Be sure that you do not connect ISDN
telephone lines to these LAN ports.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Connect the Antenna to the Wireless Router (Optional)
1-8
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Connect the Antenna to the Wireless Router
(Optional)
The Cisco 850 series wireless routers support the use of a single 2.4-GHz antenna.
(See Figure 1-3.) The Cisco 870 series wireless routers support the use of two
2.4-GHz antennas. (See Figure 1-4.)
Figure 1-3 Cisco 857 Wireless Router with Single Antenna
ADSLoPOTS
LAN
FE0 FE1 FE2 FE3
Cisco 857W
CONSOLE
AUX
RESET
+5,+12 VDC
122242
SN: XXXNNNNXXXX
1-9
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Connect the Antenna to the Wireless Router (Optional)
Figure 1-4 Cisco 871 Wireless Router with Two Antennas
To connect the antenna or antennas to a wireless router, follow these steps:
Step 1 Attach each antenna to a reverse-polarity threaded Neill-Concelman (RP-TNC)
connector on the back of the router and tighten the connector hand-tight.
Step 2 After you connect the antenna to the back of the router, orient the antenna so that
it is straight up.
LAN
FE0 FE1 FE2 FE3
Cisco 871W
CONSOLE
AUX
RESET
+5,+12 VDC
LEFT
RIGHT / PRIMARY
1
0
WAN
FE4
122241
SN: XXXNNNNXXXX
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional)
1-10
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Connect the Power-over-Ethernet Module to the
Cisco 870 Series Router (Optional)
Power-over-Ethernet (PoE) is supported on the Cisco 870 Series routers only. If
you purchased a PoE module, connect all four Ethernet cables on the PoE module
to the four LAN Ethernet ports on the Cisco 870 Series router. (See Figure 1-5.)
Make sure that you connect all four Ethernet cables.
If the cables are too close together for easy insertion, move the plastic cable guard
away from the connector end of the cables.
Caution To ensure proper PoE module operation, do not connect the PoE module power
supply to the PoE module before you connect the PoE module to the router.
Although Figure 1-5 shows the Cisco 871 router connected to a PoE module, this
connection works for all router models in the Cisco 870 series.
Note When you connect a device (such as a PC or IP phone) to the PoE module, you
may notice a 1- to 2-second delay before the LED indicator for the port comes on.
Other manuals for 850 Series
2
This manual suits for next models
1
Table of contents
Other Cisco Network Router manuals
Cisco
Cisco RV016 - Small Business - 10/100 VPN Router User manual
Cisco
Cisco ASR-920-8S4Z-PD Manual
Cisco
Cisco Cisco 888 Manual
Cisco
Cisco ASR 5000 Series Instruction Manual
Cisco
Cisco WS-C6503 User manual
Cisco
Cisco Catalyst 2900 Series XL User manual
Cisco
Cisco DVB CAR100 Series User manual
Cisco
Cisco 2650 - 2650 Router Manual
Cisco
Cisco SRP521W User manual
Cisco
Cisco ASR 900 Series User manual
Cisco
Cisco NCS 5500 Series Manual
Cisco
Cisco NCS 5700 User manual
Cisco
Cisco RV120W User manual
Cisco
Cisco uBR925 Setup guide
Cisco
Cisco WUMC710 User manual
Cisco
Cisco 1401 User manual
Cisco
Cisco 1417 User manual
Cisco
Cisco 8800 Series Manual
Cisco
Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1... User manual
Cisco
Cisco ASR 1001-X Manual
