CIS CL-OPT200T Installation instructions

CL-OPT200T/R Rev.900-759-30-00

English

Camera Link⇔Optical Signal Converter

CL-OPT200T/R

Product Specification

& Operation Manual

CIS Corporation

CL-OPT200T/R Rev.900-759-30-00

Table of Contents

PAGE

1. Scope of Application........................................................................................................................................... 3

2. Handling Precautions.......................................................................................................................................... 3

3. Product Outline.................................................................................................................................................. 5

3.1. Product Configuration................................................................................................................................. 5

3.2. Packaging .................................................................................................................................................. 5

4. Specifications..................................................................................................................................................... 6

4.1. General Specifications................................................................................................................................. 6

4.2. External Input/Output Signals ..................................................................................................................... 7

5. Function Settings ............................................................................................................................................... 8

6. External Connector Interface...............................................................................................................................9

6.1. 6pins circular connector HR10-7R-6PA (HIROSE) or equivalent (for both CL-OPT200T/R).......................... 9

6.2. Camera Link Connector 12226-1100-00PL (SUMITOMO 3M)......................................................................... 9

6.3. Optical Module Connector AFBR-57D9AMZ (AVAGO) (for both CL-OPT200T/R) ............................................ 10

7. LED Status Indication ....................................................................................................................................... 11

8. Selection of Power Feeding Method ................................................................................................................... 11

9. Precautions for Power Over Camera Link (PoCL) ................................................................................................ 12

10. Connection Example......................................................................................................................................... 12

11. Dimensions...................................................................................................................................................... 13

11.1. CL-OPT200T Dimensions........................................................................................................................... 13

11.2. CT-OPT200R Dimensions........................................................................................................................... 14

12. Cases for Indemnity (Limited Warranty)............................................................................................................. 15

13. Product Service................................................................................................................................................ 15

CL-OPT200T/R Rev.900-759-30-00

1. Scope of Application

This is to describe CL-OPT200T/R signal converters enable CIS camera link cameras to connect with

frame grabber boards via optical fiber cables. All specifications contained herein are subject to

change without prior notice. Reproduction in whole or in part is prohibited.

2. Handling Precautions

The signal converters must not be used for any nuclear equipments or aerospace equipments with

which mechanical failure or malfunction could result in serious bodily injury or loss of human life.

Our warranty does not apply to damages or defects caused by irregular and/or abnormal use of the

product. Please observe all warnings and cautions stated below.

Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.

zCL-OPT200T can be used only with CIS camera link cameras. Output CLK of CL-OPT200R is 81MHz

fixed. To capture the images, please use a frame grabber board corresponds to 85MHz.

zPlease use a metallic frame for heat dissipation. (The recommended size of the metallic frame:

larger than H:2mm W:90mm D:90mm) CL-OPT200T/R Main Unit

CL-OPT200Fixing Bracket

zDo not use or store the converter in the following extreme conditions:

¾Extremely dusty or humid places.

¾Extremely hot or cold places (operating temperature –5 to +4℃5)℃

zDo not apply excessive force or static electricity that could damage the converter.

zFollow the instructions in Chapter 6, “External connector interface” for connecting.

Improper connection may cause damages not only to the converter but also to the connected

devices.

CL-OPT200T/R Rev.900-759-30-00

zConfirm the mutual ground potential carefully and then connect the converter to monitors or

computers. AC leaks from the connected devices may cause damages or destroy the converter.

zDo not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power

supply voltage may cause damages or malfunction of the converter.

zThe voltage ripple of converter input power DC +12V±10% shall be within ±50mV.

zThe rising time of converter input power supply voltage shall be less than +10V, Max 60ms.

Please avoid noises like chattering when rising.

In case of abnormal operation, contact the distributor from whom you purchased the product.

CL-OPT200T/R Rev.900-759-30-00

3. Product Outline

CL-OPT200T and CL-OPT200R are signal converters enable CIS camera link cameras to connect with

frame grabber boards via optical fiber cables. With optical fiber cables, data can be transmitted up to

150m length.

Please be noted that only CIS cameras can be connected to CL-OPT200T/R.

Key Features

□ With optical fiber cables, data can be transmitted up to 150m length.

□ Owing to optical fiber cable connection, no radio interference or grand noise would occur.

□ Comply with Camera Link Base/Medium Standard

□ Only CIS camera link non-PoCL and PoCL cameras can be connected.

□ As to PoCL, there are some limitations. (Please refer to page 10 for the details.)

3.1. Product Configuration

□CL-OPT200T (Camera Link → Optical Signal Converter)

□ CL-OPT200R (Optical Signal → Camera Link Converter)

3.2. Packaging

□ Individual Carton

□ Sub Carton (10 pieces/carton)

□ Master Carton (100 pieces/carton)

Note: Master carton may change depends on the quantities to be shipped per delivery.

CL-OPT200T/R Rev.900-759-30-00

4. Specifications

4.1. General Specifications

(1) Power Requirements DC+12V±10% (Max voltage not to exceed 15V.)

6pins circular connector or PoCL Input (with limitation).

(2) Power Consumption CL-OPT200T : Typ 4.3W / CL-OPT200R : Typ 3.8W

(3) Dimensions

Refer to overall dimension drawing

(H:25mm W:60mm D:90mm without protruding portion)

(For both CL-OPT200T/R)

(4) Weight Approx. 200g (For both CL-OPT200T/R)

(5) Camera Link

Input/Output Connector CL-OPT200T/R (For both CL-OPT200T/R)

mini Camera Link connector 12226-1100-00PL

(SUMITOMO 3M)

CL-OPT200T

Camera Link non-PoCL or PoCL Input

Camera Link input CLK frequency: Driver IC rated 20MHz ～80MHz

Base Configuration/Medium Configuration

CL-OPT200R

Camera Link Output

Camera Link output CLK frequency: 81MHz fixed

(Please connect with a frame grabber board corresponds to 85MHz.)

Base Configuration/Medium Configuration

(6) Optical Connector

LC duplex connector

Optical Module Rated: 8 Gb/s

Light wavelength: 850nm

Transmission Bandwidth: 6.125 Gb/s

AFBR-57D9AMZ(AVAGO)

(7) Optical Fiber Cable

Length Max. 150m

(8) Supported Cameras CIS tested Camera Link, non-PoCL, and PoCL cameras.

Base Configuration Camera Series:

VCC-G22/F22 (pixel clk: 49.09MHz) series

VCC-G32/F32 (pixel clk: 72MHz) series

VCC-G60 (pixel clk: 64MHz) series

VCC-GC20/FC20 (pixel clk: 79.99MHz) series

Medium Configuration Camera Series:

VCC-F51/F52 (pixel lk: 72MHz) series

VCC-GC60/FC60 (pixel clk: 72MHz) series

VCC-GC21/FC21 (pixel clk: 80MHz) series

Cannot run the camera at Full Configuration Mode.

(Please contact our sales department regarding connections not listed

above.)

(9) Trigger Delay Referenced Value (measured value with Fujikura

DXLC-2P-PC-(L)M-GC50/125-25R Optical cable)

About 700ns (Circuit Fixed delay) + (5ns x L:Optical cable length (m))

(10) Video Delay Less than 1Line (Refer to the spec of camera to be connected.)

(11) Serial Communications 9600bps fixed

Note: Set the frame grabber at 9600bps.

(12) Safety/Quality Standards UL: Conform to UL Standard including materials and others.

CE: Emission: EN55022:2010 (Class B)

Immunity: EN61000-6-2:2005

CL-OPT200T/R Rev.900-759-30-00

RoHS: Conform to RoHS

FCC: To be applied

(13) Durability Vibration

resistance Acceleration : 98m/s2(10G)

Frequency

: 20～200 Hz

Direction : X,Y, and Z, 3 directions

Testing time : 120min for each direction

Shock

resistance No malfunction shall be occurred with 980m/s2(100G) for

±X, ±Y, and ±Z, 6 directions. (without package)

(14) Operation Environment Operation

Temeprature -5 ～+45℃With RH 20～80% With no

condensastion

(15) Storage Environment -25 ～+60℃with RH20 ～80% with no condensation

4.2. External Input/Output Signals

(1)GPIO FVAL output :No.3pin 6pins circular connector

(LVTTL output)

External Trigger input :No.4pin

IO Interface of 6 pins circular connector at rear

CL-OPT200T/R Rev.900-759-30-00

5. Function Settings

With internal dip switch, trigger signals input can be selected.

(1) SW2-1 ・・・ OFF : (Initial Setting)

(1) SW2-2 ・・・ OFF : (Initial Setting)

(2) SW2-3 Trigger input

selection

・・・ ON : 6 pins circular connector input

OFF : Camera Link (CC1) input (Initial Setting)

(3) SW3-1 Camera Link

Configuration

・・・ OFF : Base/Medium (Initial Setting)

ON : Do not use.

(4) SW3-2 ・・・ OFF : Not used (Initial Setting)

(5) SW3-3 ・・・ ON : Not used

・・・ OFF : Not used (Initial Setting)

CL-OPT200T/R Rev.900-759-30-00

6. External Connector Interface

6.1. 6pins circular connector HR10-7R-6PA (HIROSE) or equivalent (for both CL-OPT200T/R)

Pin No.

1 Power Input (DC+12V)

2 Power Input (DC+12V)

3 FVAL output

4 External Trigger Input

5 GND

6 GND

6.2. Camera Link Connector 12226-1100-00PL (SUMITOMO 3M)

CL-OPT200T CN1 (Camera Link In: Base side)

Pin No. Pin No.

1 NC/+12V(PoCL) 14 GND

2 X0- 15 X0+

3 X1- 16 X1+

4 X2- 17 X2+

5 Xclk- 18 Xclk+

6 X3- 19 X3+

7 SerTC+ 20 SerTC-

8 SerTFG- 21 SerTFG+

9 CC1- 22 CC1+

10 CC2+ 23 CC2-

11 CC3- 24 CC3+

12 CC4+ 25 CC4-

13 GND 26 NC/+12V(PoCL)

CN2 (Camera Link In: Medium Side)

Pin No. Pin No.

1 NC 14 GND

2 Y0- 15 Y0+

3 Y1- 16 Y1+

4 Y2- 17 Y2+

5 Yclk- 18 Yclk+

6 Y3- 19 Y3+

7 100Ω20 Terminated

8 Z0- 21 Z0+

9 Z1- 22 Z1+

10 Z2- 23 Z2+

11 Zclk- 24 Zclk+

12 Z3- 25 Z3+

13 GND 26 NC

CL-OPT200T/R Rev.900-759-30-00

CL-OPT200R CN1 (Camera Link Out: Base side)

Pin No. Pin No.

1 GND/+12V(PoCL) 14 GND

25 X0- 12 X0+

24 X1- 11 X1+

23 X2- 10 X2+

22 Xclk- 9 Xclk+

21 X3- 8 X3+

20 SerTC+ 7 SerTC-

19 SerTFG- 6 SerTFG+

18 CC1- 5 CC1+

17 CC2+ CC2-

16 CC3- CC3+

15 CC4+ CC4-

13 GND 26 GND/+12V(PoCL)

CN2 (Camera Link Out: Medium side)

Pin No. Pin No.

1 NC 14 GND

25 Y0- 12 Y0+

24 Y1- 11 Y1+

23 Y2- 10 Y2+

22 Yclk- 9 Yclk+

21 Y3- 8 Y3+

20 100Ω7 Terminated

19 Z0- 6 Z0

18 Z1- 5 Z1+

17 Z2- 4 Z2+

16 Zclk- 3 Zclk+

15 Z3- 2 Z3+

13 GND 26 NC

6.3. Optical Module Connector AFBR-57D9AMZ (AVAGO) (for both CL-OPT200T/R)

LC duplex Connector

This manual suits for next models

Table of contents

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide