CID XBC173060 User manual
SAFETY RULES | OPERATING INSTRUCTIONS | MAINTENANCE PROCEDURES
XBCMAN01
JANUARY 2021
OWNER’S MANUAL
X-TREME DUTY
PISTON MOTOR
BRUSH CUTTER
30-48 GPM30-48 GPM
MODEL SERIES
30-48 GPM30-48 GPM
27-35 GPM27-35 GPM
17-27 GPM17-27 GPM
XBC273560 XBC304860
XBC173072 XBC273572
XBC173078
XBC273584
XBC273578
XBC173084
XBC173060
XBC304884
XBC304878
XBC304872
* -MT (Mulching Teeth)
DEALER INFORMATION
PURCHASE DATE:
DEALER NAME:
ADDRESS:
PHONE NUMBER:
Record product information below.
Register this product at www.cidattachments.com.
Copyright © 2021 Construction Implements Depot, Inc. All Rights Reserved. This manual may
not be reproduced or copied, in part or in whole without written permission from CID, Inc.
XBCMAN01 / FIRST EDITION / JANUARY 2021
SCAN
TO VIEW
OWNER’S
MANUAL
XBCMAN01
X-TREME DUTY PISTON
MOTOR BRUSH CUTTER
TABLE
OF
CONTENTS
LETTER TO OWNER..................................................................................................................................6
SECTION 2 SAFETY INFORMATION
2.1 Introduction...................................................................................................................................................8
2.2 Safety Symbols.......................................................................................................................................8-10
2.3 Safety Decals..........................................................................................................................................11-13
2.4 Skid Steer Tractor Requirements..............................................................................................................14
2.5 General Safety Instructions.......................................................................................................................15
SECTION 3 OPERATING PROCEDURES
3.1 Unpacking Your Brush Cutter....................................................................................................................17
3.2 How To Attach Brush Cutter To Skid Steer Tractor..........................................................................17-18
3.3 How To Start and Stop The Brush Cutter.........................................................................................19-20
3.4 First Time Use.............................................................................................................................................20
3.5 Cutting Operations..............................................................................................................................22-24
SECTION 4 MAINTENANCE PROCEDURES
4.1 Maintenance Overview...............................................................................................................................26
4.2 Maintenance Schedule...............................................................................................................................27
4.3 Storage Tips.................................................................................................................................................28
4.4 Blade Holder Removal..........................................................................................................................28-29
4.5 Blade Holder Installation............................................................................................................................30
4.6 Blade Removal Procedures.................................................................................................................30-31
4.7 Blade Installation Procedures...................................................................................................................32
4.8 Drive Bearing Housing Maintenance................................................................................................33-34
4.9 Torque Specication Table.........................................................................................................................34
SECTION 5 TROUBLESHOOTING
5.1 Troubleshooting Chart................................................................................................................................36
SECTION 6 SPECIFICATIONS
6.1 Specication Chart......................................................................................................................................38
SECTION 7 PARTS INFORMATION
7.1 Parts Assembly Diagrams...................................................................................................................40-43
SECTION 8 WARRANTY INFORMATION
8.1 Limited Warranty Statement....................................................................................................................45
8.2 Warranty Service Procedure.....................................................................................................................46
SAFETY ACKNOWLEDGEMENT FORMS.........................................................................47-48
MAINTENACE LOG.................................................................................................................................50
X-treme Duty Piston Motor Brush Cutter
January 2021
6
THANK YOU
Dear Owner:
We appreciate your business and thank you for choosing Construction
Implements Depot, Inc. as your provider of quality skid steer attachments. We
are committed to providing you with a heavy duty product that will provide
years of satisfaction and safe operation.
This manual will provide instructions on how to safely operate and maintain the
X-treme Duty Piston Motor Brush Cutter. All users must read and understand
this manual before operating this machine. Upon reading this manual, all users
should sign the “Safety Acknowledgement Form” at the end of this manual. Store
this manual in the document canister attached to this machine.
Please record your model and dealer information on the inside front cover. You
will be asked to provide this information when ordering parts or requesting
service. If you need more information on this product, contact your local dealer
or visit
www.cidattachments.com.
Sincerely,
The CID Team
Construction Implements Depot, Inc.
SAFETY
INFORMATION
SECTION 2
7
2.1 Introduction
The X-treme Duty Piston Motor Brush Cutter is designed and manufactured with
safety in mind. However, improper use and operator error can result in death
or serious injury. It is important that you read and fully understand the safety
instructions and operating procedures in this manual before operating this brush
cutter. Accident prevention is a combination of good judgement, common sense,
awareness and proper training!
BEFORE you operate this Brush Cutter:
1. KNOW how to safely operate your skid steer loader.
2. READ and UNDERSTAND the safety instructions and operating procedures
contained in this manual.
3. ACKNOWLEDGE your understanding of all safey instructions presented in
this manual by signing the “Safety Acknowledgement Form” at the end of this
manual.
8
X-treme Duty Piston Motor Brush Cutter implement, attachment, product,
machine, brush cutter, cutter
Skid Steer skid steer loader, skid steer tractor,
loader, prime mover
Operator user, personnel
The following terms are used interchangeably throughout this manual.
Alternate Terms Used
Although every eort has been made to ensure a safe product, every possible
circumstance that could pose a potential hazard cannot be anticipated. The safety
warnings in this manual and on this product, are therefore not all-inclusive.
In addition to the safety messages presented in this section, you must also read
and understand the safety messages presented in the other sections of this
manual.
Term
SAFETY ALERT SYMBOL - This symbol is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible in-
jury or death.
2.2 Safety Symbols
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme
situations.
Hazard Classications
Hazards are identied by the “Safety Alert Symbol” and followed by the signal word
“DANGER”, “WARNING”, or “CAUTION”.
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury.
Indicates a situation which may cause damage to equipment or
property. Messages are not related to personal injury.
Indicates specic safety-related instructions or procedures.
9
This manual and decals on this machine use safety symbols, pictograms and
color coded signal words to alert you to potential hazards that may cause
death or severe injury if a safety instruction is ignored. Become familiar with
the following symbols.
2.2 Safety Symbols Cont.
Safety Pictograms
Pictograms are graphic symbols meant to alert you of a potential hazard. Read
and understand the hazard description for each of these symbols.
Pictogram Description
PINCH HAZARD: Keep clear of skid steer and brush cutter
machine to prevent death or serious injury from pinching
of moving parts.
FLYING DEBRIS HAZARD: ONLY operate this machine
using a skid steer that has a shatter proof cab to prevent
death or serious injury from objects being thrown.
OPERATING MANUAL: Operators must read and
understand the safety instructions in the operating
manual to prevent death or serious injury.
EYE PROTECTION & CARDBOARD: Operators and
Maintenance personnel must wear proper eye protection
and use cardboard or wood to investigate hydraulic leaks
to prevent death or serious injury from being injected
with high pressure hydraulic uid.
HIGH PRESSURE FLUID INJECTION HAZARD: Operators
and Maintenance personnel must not place ngers or
hands directly over a hydraulic leak to prevent death or
serious injury from being injected with high pressure
hydraulic uid.
NO BYSTANDERS: DO NOT operate this machine near
bystanders. Bystanders must stay back at least 300 feet
from the machine to prevent death or injury from objects
being thrown.
CRUSH HAZARD: DO NOT place any part of the body
under the machine or skid steer arms to prevent death or
serious injury from being crushed .
SAFETY CHAIN: Must be installed to prevent the mower
deck from being raised more than 2 feet from ground
level.
10
This manual suits for next models
11
Table of contents
Other CID Tractor Accessories manuals
Popular Tractor Accessories manuals by other brands
Ventrac
Ventrac KD482 Operator's manual & parts drawings
Original Tractor Cabs
Original Tractor Cabs 4421381 Assembly instructions and parts list
Grouser Products
Grouser Products 760 Owner's manual & parts book
Degelman
Degelman Landroller Operator's & parts manual
Bush Hog
Bush Hog BS1 Series Operator's manual
MX
MX MX A104 user manual