Chord Mojo2 User manual
2.0 Connect inputs
Connect digital devices via Micro-USB or
USB-C. Optical and coaxial can also be
used. Mojo 2 will auto-select the input
when music is playing. USB takes priority
over coaxial and then optical in that order.
1.0 Charging
For optimum performance fully charge
before use. Connect the Micro-USB
charging port to power; Battery status light,
blue = fully charged. Purple = desktop
mode when permanently connected.
PORTABLE DAC/HEADPHONE AMP
Mojo2
Chord Electronics
Mojo 2 Quickstart Guide
5.0 Volume adjustments
3.0 Connect headphones
Connect up to two pairs of 3.5 mm
minijack headphones. Note: the volume
adjusts both headphones together; there is
no independent control.
4.0 Power up
Press and hold the power button until
illuminated, then release. The button will
cycle through colours and click, before
being ready to use.
Before use, press/hold the ‘-‘ volume
button until both ‘+’ and ‘-‘ are unlit. When
music is playing, safely increase volume
using ‘+’ to a comfortable level; use ‘-‘ to
reduce.
Download the full manual from our website:
chordelectonics.co.uk/product/mojo2
Chord Electronics
Mojo 2 Quickstart Guide
Table of contents
Other Chord Amplifier manuals
Chord
Chord ULTIMA PRE Instruction manual
Chord
Chord CVH-40 User manual
Chord
Chord SPM 1400 MK2 User manual
Chord
Chord Etude User manual
Chord
Chord ULTIMA 2 User manual
Chord
Chord ULTIMA PRE 2 User manual
Chord
Chord Hugo2 User manual
Chord
Chord PRIMA User manual
Chord
Chord Chordette SCAMP User manual
Chord
Chord SPM 6000 Mk2 User manual
Chord
Chord ULTIMA PRE User manual
Chord
Chord ULTIMA 3 Instruction manual
Chord
Chord Hugo User manual
Chord
Chord PRIMA Instruction manual
Chord
Chord Hugo TT 2 User manual
Chord
Chord Etude Instruction manual
Chord
Chord CB-SERIES User manual
Chord
Chord ULTIMA 5 User manual
Chord
Chord ULTIMA 6 User manual
Chord
Chord ULTIMA PRE User manual
