Choice Select CHO4006 User manual
ATSC HDTV DIGITAL
TERRESTRIAL
SET TOP TUNER
CHO4006 Compact ATSC Set Top Box
User’s Manual
Deleted:
1
Index
Introduction……………………………………..………………… 1
Panel…………………………………………………………….... 2
Connection……………………………………………………..… 3
Remote Controller……………………………….……..………... 4
Software Operation………………………………………….…... 5-26
User Information…………………………………………………. 26
Introduction
ATSC Set Top Box is the smallest and most compact ATSC HDTV
receiver box for free-to-air (FTA) terrestrial digital TV broadcasting. With this
device you can enjoy the HDTV and DVD quality video and audio for free. It
supports CC, Electronic Program Guide (EPG) and V-Chip. Through the EPG,
you can set up to 10 program timers to remind you of important programs.
With YPbPr and Composite Video output, it can be your Big Screen
Display Companion.
Features:
ATSC HDTV and SDTV
Electronic Program Guide: Channel, daily and weekly
Close Caption
V-Chip supported
2
Package Content
Before your installation, check the package contents:
ATSC Set Top Box
Remote controller
AV Cable
AC/DC Adaptor
Front Panel
Front Panel
Rear Panel
CH +/- Power
3
Connection
Connect to TV set with Composite Video
(Switch must be on “CVBS” position)
Connect to TV set with YPbPr Input
(Switch must be on “YPbPr” position)
4
Remote Controller Illustration
POWER Power On /Off
0—9 0,1,2,3,4,5,6,7,8,9
CH +/- Channel Up/Down
VOL +/- Volume Up/Down
MUTE Mute
PRE-CH Go to previous Channel
RED/GREEN/
YELLOW/BLUE Function keys
Favorite channel group
MENU Menu key
EXIT Exit to previous menu or
exit
UP(CH+) / DOWN(CH-)
LEFT(VOL-) /
RIGHT(VOL+)
OK Select/Mark/OK
EPG Electronic Program Guide
INFO Information of the current
channels
MTS Bilingual audio switch
Caption Toggle to choose close
caption format.
List Program list
SCAN Auto Scan of available
channels
ASPECT Change output video
aspect ratio
RES Change output resolution,
valid only for YPbPr
Output
5
Software Operation
When you press the “menu” key on the remote controller, the following
picture will appear on your TV screen. There are 4 sections: the left side is the
“main items”, upright is the “name of the main item”, middle is the “sub items of
the main item”, the lower side is the “status”. In the first operation, the main
items is located on “Channel”. You can choose another main item via or
you can enter the sub items via key on the remote controller. For the
further information and operation of the different main items and sub items,
please see the following paragraphs.
The software organization is as follows:
Channel Channel
Auto scan
Edit
Favorite Channel
Video Picture Control
Aspect Ratio
Audio
Audio Control
Sound
Speech
EPG
Present
Daily
Update Reservation
Setup
Parental Control
Channel Lock
Movie Rating
TV Rating
Change Password
Caption
Closed Caption
Analog CC Mode
Digital CC Mode
User Define Style
Language
OSD Setting
Time Zone
Default
Items
Sub items
Status
Menu Items
6
Main items and sub items operation
Channel: setting of channels, searching channel
Manual Searching
Choose “channel” on the main
items.
Use key to select the sub
items “channel”
Input the Channel Number (via
your remote) on the screen, then
press the “OK” key on your
remote.
* Please Note: channel number is
valid only for 2-69, numeric only
7
Press on the remote to select
“start”, then press “OK” on your
remote to start the scanning
process.
When the scan begins, a
progress bar will appear on your
screen. If there are programs
available, that information will be
shown on the screen.
Channel-Auto scan for the available TV channels
Move the arrow key to “auto scan”
then choose “yes” for auto scan
all the available channels.
8
During scanning, you will see a
progress bar and channel
information.
Channel edit: edit the channels that already scanned and stored
Use the arrow key to select “Edit”
sub item, press “OK” to enter the
Channel Edit screen.
Channel Edit screen. All available
channels will show on the list. To
delete a channel use the arrow
key and press “OK”. The deleted
channels will not show up when
you press CH+/-, or when you
press ”LIST” on your Remote.
9
Favorite channel: edit the favorite channels
Use arrows key to select
“Favorite” sub item, then press
“OK” to enter the Favorite
Channel list.
Favorite channel screen. All the
channels are listed on this screen.
Set your desired channels via the
4 colored keys. Each color
indicates a different favorite
group. Please Note: when you
use the “Auto Scan” or “Default”
functions, all favorite channel lists
will be cleared.
Table of contents
