2/5 01325-01326-01327-01391 PARALLEL BARS PLUS
1. GENERAL INFORMATION
−relative humidity 10% / 90 % - temperature -10°C / +50°C
2. SPECIAL WARNINGS AND USE RESTRICTIONS
The appropriateness of the PARALLEL BARS PLUS use must be evaluated by a specialist.
The equipment has been designed to perform only the functions described in this manual.
The equipment must not be used:
if the original product has been modified or tampered with;
without the necessary adjustments and user-specific setup.
–Never spill liquid of any kind on the equipment.
–Do not operate the release pedal when the patient is on the platform: handrail support will not be guaranteed by the springs alone.
–Do not use the glider if the safety stops have not been fitted to the handrails.
–Do not load the handrails, the platform (where specified) and the glider beyond the allowed safety limit.
–The wooden and plastic components of the equipment can catch fire in contact with naked flames.
–The adjustable or moving parts can cause injury.
3. USE
SETUP:
01325 – 01326 – 01391 – PARALLEL BARS PLUS 2M - 3M - 2M and CHILDREN’S
01327 – PARALLEL BARS PLUS 3M TILT refer to instructions in the attached manual.
1. Remove the equipment, ramps and hardware bags from the packaging.
2. Put the walking platform on one side.
3. Install the ramps with the hardware provided (Fig. 1).
4. Install the gas springs on the uprights from both sides: tighten the self-locking nut, leaving the spacers free to rotate (Fig. 2).
5. Place the platform in position for use.
6. Install the handrails with the hardware provided: tighten the self-locking nut thus allowing smooth height adjustment (Fig.3).
MANUFACTURER
www.chinesport.it
PURPOSE AND CONTENT OF THESE INSTRUCTIONS
Customers must read these instructions carefully.
This manual provides all the necessary information for customers to use the equipment properly, safely and autonomously
as well as information about equipment specification, operation, maintenance, spare parts and safety.
EQUIPMENT DESCRIPTION AND INTENDED USE
Parallel bars allow performing rehabilitation and ambulation exercises safely.
They are made of painted steel with a thermoplastic coated handrail.
The modular parallel bars in the new PLUS LINE feature the “STandGOSystem” for the simultaneous and accurate adjustment of the handrails on
both sides, keeping them perfectly parallel, by means of a single control, easy to operate.
The pedal control activates gas springs for continuous movement, ensuring the most accurate and uniform adjustment, which can be millimetric or,
in any case, extremely fine. Adjustment can be performed during the rehabilitative exercise.
The distance between the handrails is easy to adjust to meet the user needs or the requirements of a specific rehabilitative exercise.
The 2- and 3-metre long basic models can be combined in various configurations to form parallel bar systems of different size: 2,3,4,5,6+ metres.
The parallel bar translation system during height adjustment makes it possible for a wheelchair person to access the handrails without the need of
going up the ramp of the base platform. The handrails can also be accessed from a sitting position and adjusted afterwards to allow a patient to walk
upright in a proper manner.
Specific therapy and rehabilitation paths can be created by inserting a different range of elements into the platform of the modular parallel bars. In
particular, the new magnetic dividers and obstacles (item code 01330) can be quickly installed and adapted to the specific needs of a patient.
The Tilt version code 01327 allows adjusting the platform from 0 to 10 degrees by means of a single hand control. It allows increasing the level of
difficulty for the ambulation of the user within a therapy and rehabilitation programme.
STORAGE
The following environmental conditions must be ensured when the equipment is to be stored:
Chiroform Ltd
Mariendalsvej 22 • 8800 Viborg
Tel. +4586613611
www.chiroform.com
