Chipsee EPC/PPC-CM3-070 User manual

Industrial PC

EPC/PPC-CM3-070

PN: CS10600RA070

Content can change at anytime, check documentation website for latest information.

www.chipsee.com

Contents

31. EPC/PPC-CM3-070

41.1. Product Overview

51.2. Ordering Options

51.2.1. Operating System

51.2.2. Optional Features

61.3. Specications

71.4. Power Input

81.5. Touch Screen

91.6. Connectivity

91.6.1. RS232/RS485

101.6.2. GPIO Port

121.6.3. USB Connectors

131.6.4. LAN Connectors

131.6.5. WiFi & BT Module

141.6.6. 3G/4G/LTE Module

151.7. TF Card Slot

151.8. Audio Connectors

161.9. Boot DIP Switch

171.10. Mounting Procedure

171.10.1. CS10600RA070E

171.10.2. CS10600RA070P

181.11. Mechanical Specications

181.11.1. CS10600RA070E

181.11.2. CS10600RA070P

191.12. Disclaimer

191.13. Technical Support

Chipsee IPC Page 2 of 19

EPC/PPC-CM3-070

Front View

Rear View

EPC/PPC-CM3-070

Chipsee IPC Page 3 of 19

Front View (Embedded Variant)

Rear View (Embedded Variant)

Product Overview

The Cortex -A53 Raspberry Pi series EPC/PPC-CM3-070 (PN: CS10600RA070) is a high-

quality industrial Pi PC. It features a 7.0” ve-point capacitive touch screen with a resolution

of 1024 x 600 pixels and brightness of 500 cd/m .

Key Applications

Human Machine Interface HMI

Process Control

Process Monitoring

® ®

•

EPC/PPC-CM3-070 Product Overview

Chipsee IPC Page 4 of 19

HMI

IIoT node

Environmental Monitoring

PLC

Automotive applications

ATM…

It is available both as an embedded solution and as a device hosed in a casing with bezels,

thus facilitating dierent installation options:

Installation on an industrial cabinet

Integration with the existing equipment

The EPC/PPC-CM3-070 industrial Pi PC is based around the powerful Raspberry Pi

Compute Module 3, powered by the BCM2837 processor with a processor speed of 1.2GHz

and a 1GB RAM.

Ordering Options

Chipsee products can be customized during the ordering process. The product will be

shipped with the pre-installed factory defaults if no extra requirements are specied. The

table in the Specications section provides information about the default options bundled

with the product.

Operating System

This product comes with a pre-installed Debian OS. Chipsee software engineers have

created all the drivers, so every hardware feature is readily available for any standard

development tool.

If your project requires a dierent OS, please Contact us, and we’ll make a customized

version that suits your needs.

Optional Features

The EPC/PPC-CM3-070 industrial Pi PC does not include the 3G/4G/LTE modules by default.

These modules are optional and can be selected at the Chipsee store during the ordering

process.

•

Note

You can order EPC/PPC-CM3-070 from the ocial Chipsee Store or from your nearest distributor.



EPC/PPC-CM3-070 Ordering Options

Chipsee IPC Page 5 of 19

Specifications

The EPC/PPC-CM3-070 industrial Pi PC oers a board range of performance and connectivity

options for scalable integration, providing expandability according to future needs. Some of

the key features are listed in the table below.

Warning

Installation, repair, and maintenance tasks should be performed by trained personnel only.

Chipsee does not bear any responsibility for damage caused by inadequate handling of the product.



EPC/PPC-CM3-070

CPU Raspberry Pi CM3, CM3 Lite;

Raspberry Pi® CM3+, CM3+ Lite; 1.2GHZ

Storage 2 TF Cards slots2

RAM 1GB DDR

eMMC 8GB

Display 7.0” IPS LCD, 1024 x 600 resolution px, brightness 500 cd/m

Touch 5-point capacitive touch

USB 2 x USB 2.0 Host

LAN 1 x Channel 100M LAN

Audio 3.5mm Audio Out Connector, 2W Speaker Internal

Buzzer Yes

RTC Yes, High Accuracy RTC with Lithium Button Coin battery (lithium battery not

included)

RS232 2 x RS232

RS485 1 x RS4851

GPIO 8 Channels, 4 Input, 4 Output

WiFi/BT Onboard WiFi/BT

HDMI 1 Channel

SATA II 1 Channel

3G/4G/LTE Supported, not mounted by default

Camera Yes, not mounted by default

Power Input From 6V to 36V

Current at 12V 700mA Max

Power Consumption 8.4W Typical

Working

Temperature From -20°C to +70°C

EPC/PPC-CM3-070 Specications

Chipsee IPC Page 6 of 19

The RS485 multiplexes with the RS232_1, which means that you cannot use RS232_1 and RS485 at the same

time.

Chipsee designed one of the TF card slots for Lite version but it does not have an eMMC. We designed the

other one for storage expansion.

Power Input

The EPC/PPC-CM3-070 industrial Pi PC can be powered by a wide range of input voltages:

From 6V to 36V DC. There are two types of power input connectors. One is a 3 Pin, 3.81mm

screw terminal connector, and the other is a 2.1mm DC input head. The polarity and the

pinout is clearly marked on the housing of the CS10600RA070P version, as well as on the

board itself of the CS10600RA070E version, as shown in the gures below.

Figure 876: Power Input (embedded/enclosed version)

EPC/PPC-CM3-070

OS Debian

Dimensions CS10600RA070E: 190 x 107.8 x 27.7mm

CS10600RA070P: 206 x 135 x 30.1mm

Weight CS10600RA070E: 400g

CS10600RA070P: 700g

Table 230 Key Features

Attention

Chipsee does not install a lithium battery by default, as we cannot ship products with batteries. We recommend you

buy it locally and install it by yourself. The lithium battery part number is CR1220. Please Contact us if you need help.



EPC/PPC-CM3-070 Power Input

Chipsee IPC Page 7 of 19

Note that the “+” sign represents the positive power input, and it is printed both at the

casing and as a silk-screen on the board of the embedded version. The “-” terminal is

shorted to the ground.

Touch Screen

The EPC/PPC-CM3-070 industrial Pi PC uses a 5-point capacitive touch screen. The gure

below shows the capacitive touch screen connected to the motherboard via the FPC

connector.

Figure 877: Capacitive Touch Connector

Power Input Denition

Pin Number Denition Description

Pin 1 Positive Input DC Power Positive Terminal

Pin 2 Negative Input DC Power Negative Terminal

Pin 3 Ground Power System Ground

Table 231 Power Connector

Note

The system ground “G” is connected to power negative “-” on board.

The central pin is positive.



Attention

A capacitive touch screen is susceptible to power noise and Electromagnetic Radiation (EMR). It may cause LCD ripples

or even capacitive touch malfunction. If using a capacitive multi-touch test application, you might notice the touch

points oat erratically across the display. There are several solutions to this problem:

Use a high-quality Power Adapter Unit (PSU) with low EMR. You can also provide power from a battery.

Make sure that the EPC/PPC-CM3-070 Power Input connector (pin 3) is properly connected to the Power System

Ground to provide sucient EMI shielding and eliminate the problem entirely.



EPC/PPC-CM3-070 Touch Screen

Chipsee IPC Page 8 of 19

Connectivity

There are many connectivity options available on the EPC/PPC-CM3-070 industrial Pi PC. It

has 2 x USB 2.0 Host (can be customized to Host or OTG), 1 x Channel 100M LAN (RJ45)

Ethernet connector supporting up to 1 Gbps, and 2 x UART terminals (RS232/RS485).

RS232/RS485

The serial communication interfaces (RS485, RS482, and CAN) are routed to a 8-pin 3.81mm

terminal, as illustrated on the gure below.

Figure 878: Relation between serial pins on embedded vs. enclosed version of the EPC/PPC-CM3-070

Industrial PC

The table below oers more detailed description of every pin and its denition:

Bad GND problem can also be conrmed by touching pin 3 of the Power Input connector with one hand while

operating the capacitive touch screen with the other hand. In this case, the operator’s body acts as the Power

System Ground.

RS232 / RS485 / CAN Pin Denition:

Pin Number Denition Description

Pin 8 RS485_1- CPU UART1, RS485 –(B) signal

Pin 7 RS485_1+ CPU UART1, RS485 +(A) signal

Pin 6 RS232_1_RXD CPU UART1, CPU RS232 RXD signal

Pin 5 RS232_1_TXD CPU UART1, CPU RS232 TXD signal

Pin 4 RS232_0_RXD CPU UART0, CPU RS232 RXD signal

Pin 3 RS232_0_TXD CPU UART0, CPU RS232 TXD signal

Pin 2 GND System Ground

Pin 1 +5V System +5V Power Output, No more than 1A Current output

EPC/PPC-CM3-070 Connectivity

Chipsee IPC Page 9 of 19

GPIO Port

The EPC/PPC-CM3-070 industrial Pi PC has a 10 Pin 3.81mm GPIO Connector, as shown on

the gure below. The table below gives details about the denition of every Pin.

Figure 879: GPIO Connector

Table 232 Connectivity Section

Attention

RS485_1 and RS232_1 share the same channel (UART1) and therefore you cannot use RS232_1 and RS485_1 at the

same time.



EPC/PPC-CM3-070 GPIO Port

Chipsee IPC Page 10 of 19

This manual suits for next models

Table of contents

Other Chipsee Industrial PC manuals

Chipsee

Chipsee PPC-CM4-150 User manual

Chipsee

Chipsee PPC-A55-133 User manual

Chipsee

Chipsee PPC-CM4-133 User manual

Chipsee

Chipsee PPC-A55-150 User manual

Chipsee

Chipsee PPC-A72-133-P User manual

Chipsee

Chipsee CS-A53-BOX User manual

Chipsee

Chipsee PPC-A9-215-C User manual

Chipsee

Chipsee PPC-A72-150-P User manual

Chipsee

Chipsee EPC-A72-101-C User manual

Chipsee

Chipsee PPC-A9-190-C User manual

Chipsee

Chipsee PPC-A72-156-C User manual

Chipsee

Chipsee PPC-A9-121-U-C User manual

Chipsee

Chipsee PPC-A72-101-C User manual

Chipsee

Chipsee PPC-A72-101 User manual

Chipsee

Chipsee EPC-CM3-101 User manual

Chipsee

Chipsee EPC/PPC-A72-070-C User manual

Chipsee

Chipsee AM335X User manual

Chipsee

Chipsee PPC-A72-215-P User manual

Chipsee

Chipsee EPC/PPC-A9-101-C User manual

Chipsee

Chipsee CS19108R125 User manual

Chipsee

Chipsee PPC-A55-050 User manual

Chipsee

Chipsee PPC-A9-150-C User manual

Chipsee

Chipsee PPC-A55-070 User manual

Chipsee

Chipsee PPC-A55-101 User manual

Popular Industrial PC manuals by other brands

Advantech

Advantech UNO-2184G user manual

MSI

MSI MS-9A76 manual

Stackrack

Stackrack THOR200 user manual

Moxa Technologies

Moxa Technologies DA-682C Series user manual

Nodka

Nodka eBOX-3000-ETC user manual

Siemens

Siemens SIMATIC IPC627E Quick install guide

MSI

MSI MS-9A89 user manual

Artila

Artila Matrix-516 user guide

Siemens

Siemens SIMATIC Rack PC 840 V2 Getting started

Advantech

Advantech IPPC-6152A user manual

Beckhoff

Beckhoff CX9020 manual

Dell

Dell Embedded Box PC 5000 Installation and operation manual

IBASE Technology

IBASE Technology ASB200-918 Series user manual

Lenovo

Lenovo ThinkCentre M90q Hardware Maintenance Manual

IXXAT

IXXAT Econ 100 Hardware manual

Kontron

Kontron KBox A-151-TGL user guide

AXIOMTEK

AXIOMTEK ICO500-518 Series user manual

JLT

JLT 1214N user manual