CHINESPORT SPA / BA No.: 02.07.083/01-12 GB
- 3 -
1. General advisories
1.1 Introduction
In these User Instructions you will find information
and advisories for start-up, use, operation,
maintenance and care of the shower/commode
stationary chair.
1.2 Intended proper use, advisories
The shower/commode stationary chair is for
household and out-patient purposes. The chair is
to be used exclusively for assistance during
showering or bathing and using a toilet inside
buildings. It is nor suitable for sitting on over a long
period of time.
The chair is not suitable for use in wet areas
(e.g. for saunas, areas with swimming pool-
like conditions), as surface discoloration and
adverse effects on the mechanical strength
can result.
Store the chair only in a dry condition!
The chairs are made of a corrosion-resistant frame
and tubes and four fixed legs. The armrests can be
swivelled back. For some models, the seat height
is adjustable to three levels, and the back rests are
cushioned in addition.
Pay attention to the ambient conditions when using
the chair. The chair may be used only for very
short times in conditions that are outside the limits.
Ambient temperature: 0 – 40°C (104
0
F)
Relative humidity: 30% - 70%
1.3 Shower chair
The shower chair may be used where the use of or
access to a conventional shower or bathtub is no
longer possible due to patient physical limitations.
The shower must be designed so that the chair is
stable.
1.4 Commode chair
The commode chair may be used where the use of
or access to a conventional toilet is no longer
possible due to patient physical limitations. The
seat surface has a toilet-like cut-out under which a
toilet pan with a lid that can be pushed in.
1.5 Shower/Commode chair
A shower and commode chair is a combination of
both applications.
2. Warranty
There is a 2-year warranty on our shower and
commode chairs.A prerequisite for the warranty is
use in accordance to the requirements outlined
herein, as well as conducting regular maintenance.
Excluded are all wear parts. Not observing the
User Instructions, improper maintenance,
unauthorised modifications done to the product
without the manufacturer’s permission
automatically lead to the immediate nullification of
warranty and product liability (see Maintenance).
The delivery date written on the delivery note
applies as the valid start date of the warranty
period.
3. Spare parts orders, complaints
To exclude incorrect spare parts deliveries and to
ensure rapid processing of complaints, always
provide the product name, serial number (SN) and
the product’s year of manufacture. You can find
this information on the chair’s nameplate.
4. Re-use, lifetime
The product is designed for re-use. The re-use
(lifetime) depends on the product’s condition.
Before re-use, maintenance of the chair must be
conducted and the applicable instructions
concerning safety care and maintenance must be
fully adhered to.
The expected lifetime of the chair can be up to 5
years when used properly and the safety
instructions, maintenance intervals and care
instructions are followed.
Beyond this time period, the product can be used
further if it is still in a safe condition (after a
complete inspection).
5. Disposal
Products that can no longer be used are to be
disposed of separately from regular household
rubbish. This must be done according to the local
and national regulations for environmental
protection and raw material recycling. Please
contact your local disposal company or officials for
further information.
6. Symbol advisories
Symbol - nameplate
Read the User Instructions!
Product conforms to the Medical
Products Directive 93/42/EEC
Year of Manuf. Serial No
Product Product
Symbols in the User Instructions:
Important advisory Language
or information!
Caution – Follow safety advisories!
Care Maintenance
GB
