CHIEF CSMP9X12 User manual

INSTALLATION INSTRUCTIONS

Static Storage Panel

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CSMP9X12

CSMP9X12 Installation Instructions

DISCLAIMER

Legrand | AV and its affiliated corporations and subsidiaries

(collectively “Legrand | AV”), intend to make this manual

accurate and complete. However, Legrand | AV makes no claim

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand | AV

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand | AV

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all accessories are

properly assembled and installed using the instructions

provided.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to accessory does not exceed 10 lbs

(4.5 kg).

WARNING: Use this accessory only for its intended use as

described in these instructions. Do not use attachments not

recommended by the manufacturer.

WARNING: Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and

repair.

WARNING: Do not use this accessory outdoors.

--SAVE THESE INSTRUCTIONS--

Installation Instructions CSMP9X12

DIMENSIONS

DIMENSIONS: INCHES

[MILLIMETERS]

CSMP9X12 Installation Instructions

LEGEND

Tighten Fastener

Apretar elemento de fijación

Befestigungsteil festziehen

Apertar fixador

Serrare il fissaggio

Bevestiging vastdraaien

Serrez les fixations

Loosen Fastener

Aflojar elemento de fijación

Befestigungsteil lösen

Desapertar fixador

Allentare il fissaggio

Bevestiging losdraaien

Desserrez les fixations

Phillips Screwdriver

Destornillador Phillips

Kreuzschlitzschraubendreher

Chave de fendas Phillips

Cacciavite a stella

Kruiskopschroevendraaier

Tournevis à pointe cruciforme

Open-Ended Wrench

Llave de boca

Gabelschlüssel

Chave de bocas

Chiave a punte aperte

Steeksleutel

Clé à fourche

By Hand

A mano

Von Hand

Com a mão

A mano

Met de hand

À la main

Hex-Head Wrench

Llave de cabeza hexagonal

Sechskantschlüssel

Chave de cabeça sextavada

Chiave esagonale

Zeskantsleutel

Clé à tête hexagonale

Pencil Mark

Marcar con lápiz

Stiftmarkierung

Marcar com lápis

Segno a matita

Potloodmerkteken

Marquage au crayon

Drill Hole

Perforar

Bohrloch

Fazer furo

Praticare un foro

Gat boren

Percez un trou

Adjust

Ajustar

Einstellen

Ajustar

Regolare

Afstellen

Ajuster

Remove

Quitar

Entfernen

Remover

Rimuovere

Verwijderen

Retirez

Optional

Opcional

Optional

Opcional

Opzionale

Optie

En option

Security Wrench

Llave de seguridad

Sicherheitsschlüssel

Chave de segurança

Chiave di sicurezza

Veiligheidssleutel

Clé de sécurité

Installation Instructions CSMP9X12

TOOLS REQUIRED FOR INSTALLATION

PARTS

1/2" Wire cutter

Mounting Plate Installation Hardware Kit

A (4)

[Thumb nut] B (3)

10-32 x 3/8"

C (1)

5/16"

D (1)

[PEM Stud] E (20)

F (2)

[Thumb screw]

G (1)

[Mounting plate]

H (1)

[Mounting bracket]

.625x.140x.031"

CSMP9X12 Installation Instructions

ASSEMBLY AND INSTALLATION

NOTE: The mounting bracket (H) may be installed using either of two methods. Proceed to either Installing Mounting Bracket to

VESA Holes OR Installing Mounting Bracket to Display Mount Interface Bracket.

Installing Mounting Bracket to VESA Holes

NOTE: The mounting bracket (H) may be installed using VESA holes between display mount interface brackets and the display in

vertical or horizontal positions. (See Figure 1)

Figure 1

Mounting bracket

vertical and horizontal

installation examples

Mounting bracket (H)

1. Place display face down on a soft surface.

NOTE: Any existing display mount interface bracket hardware

that is already installed on the back of the display must

be removed before installing the mounting bracket (H).

2. Use the hardware provided with your display mount

interface brackets to attach mounting bracket (H) between

the display mount interface bracket and into the VESA holes

in the back of the display. (See Figure 2)

Figure 2

Installing Mounting Bracket to Display Mount

Interface Bracket

NOTE: Instead of attaching the mounting bracket (H) to VESA

holes in the back of the display, it may also be attached

directly to the display mount interface bracket.

1. Place display face down on a soft surface.

2. Connect the mounting bracket (H) to the desired point on

the display mount interface bracket with one PEM stud (D)

and flange nut (C). (See Figure 3)

Figure 3

(H)

Example display mount interface bracket

Back of

display

(H)

Display mount

interface

bracket

(D)

(C)

Installation Instructions CSMP9X12

Installing Thumb Screws / Thumb Nuts

1. Attach two thumb screws (F) to two thumb nuts (A) through

corners of the mounting plate (G). (See Figure 4)

NOTE: The thumb screws and thumb nuts should be attached

to the corners on the side of the mounting plate (G)

opposite where the mounting bracket (H) will be

attached.

Figure 4

Attaching Component

1. Place component(s) on mounting plate (G), and position in

the desired location with the hole pattern in mounting plate

best aligned to component mounting holes. (See Figure 5)

Figure 5

2. Using the fasteners provided with the component and the

washers (E), attach the component to the mounting plate

(G). (See Figure 5)

Attaching Mounting Plate to Mounting Bracket

1. Using two 10-32 x 3/8" thread forming screws (B) fasten

mounting bracket (H) to mounting plate (G). (See Figure 6)

Figure 6

Adjusting / Trimming the Thumb Screws

1. Loosen the two thumb screws (F) from the two thumb nuts

(A) until the mounting plate (G) is parallel to the back of the

display. (See Figure 7)

2. Use a wire cutter to trim off remaining excess portion of the

two thumb screws (F). (See Figure 7)

Figure 7

(A) x 2

(F) x 2

(G)

Component

fasteners

(E)

(G)

(B) x 2

(G)

(H)

Trim excess portion

of thumb screws

using a wire cutter

CSMP9X12 Installation Instructions

USA/International A 6436 City West Parkway, Eden Prairie, MN 55344

P800.582.6480 / 952.225.6000

F877.894.6918 / 952.894.6918

Europe A Franklinstraat 14, 6003 DK Weert, Netherlands

P+31 (0) 495 580 852

F+31 (0) 495 580 845

Asia Pacific A Office No. 918 on 9/F, Shatin Galleria

18-24 Shan Mei Street

Fotan, Shatin, Hong Kong

P852 2145 4099

F852 2145 4477

8800-003124 Rev01

2019 Legrand | AV

www.legrandav.com

03/19

Table of contents

Other CHIEF Rack & Stand manuals

CHIEF

CHIEF QMP1T User manual

CHIEF

CHIEF PSMH2465 User manual

CHIEF

CHIEF Direct Attach Ceiling Mount JHS Series User manual

CHIEF

CHIEF Small Flat Panel In-Wall Swing Arm Mount FWDIW-I... User manual

CHIEF

CHIEF PSM2613 User manual

CHIEF

CHIEF PST 2000 Series User manual

CHIEF

CHIEF SLMU User manual

CHIEF

CHIEF NE1D20F User manual

CHIEF

CHIEF PSM-2230 User manual

CHIEF

CHIEF CMA440 User manual

CHIEF

CHIEF SL-236 Operating and safety instructions

CHIEF

CHIEF K1W22H K1S22H User manual

CHIEF

CHIEF KRA227 Service manual

CHIEF

CHIEF ECRR Series User manual

CHIEF

CHIEF CM7W12U User manual

CHIEF

CHIEF PACCC1 User manual

CHIEF

CHIEF PAC527F-KIT User manual

CHIEF

CHIEF FMSWA User manual

CHIEF

CHIEF PDC Series User manual

CHIEF

CHIEF FCA623S User manual

CHIEF

CHIEF J Series User manual

CHIEF

CHIEF PSMA800 User manual

CHIEF

CHIEF FSD-4100 User manual

CHIEF

CHIEF Kontour KRA226 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 