2
Important - To protect the appliance and the memory modules from
electrostatic discharge damage, make sure that you are properly
grounded before you touch these components. Read the Health and
Safety Information in the
Check Point 4000 Appliances Getting S
Guide
before you start to prepare the appliance.
We recommend that you use the grounding wrist strap that is included
in the upgrade kit. The grounding plug on the rear of the appliance
provides a chassis grounding point.
Upgrade Kit Contents
•Installation guide - Check Point 4000 and TE250 Appliances Installing and
Removing Memory
•Memory DIMMs
•Screwdriver
•Upgrade kit sticker
•ESD grounding strap (anti-static)
To prepare the appliance:
1. Put on the ESD strap and attach the other end to a grounding point.
2. Use the power switch to turn off power to the appliance.
3. Remove the power cords from the appliance.
4. Remove the warranty sticker from the appliance cover screw.
5. Remove the appliance cover screws.
Only use the screwdriver that is included in the upgrade kit to open and
replace the appliance cover.
6. Remove the top cover from the appliance.
