Steam Generator Location
Select a location as near as practical to the shower room. Typical
locations include: closet, vanity cabinet, climate controlled attic or
basement.
1．Locate the steam bath generator within 32 feet of the shower
room.The standard length of the cable for connecting the control to the
steam generator is 32 feet. The steam generator and control must be
located accordingly
2．DO NOT install steam bath generator inside shower room.
3．DO NOT install steam bath generator outdoors or wherever
environmental conditions may affect the safety and/or performance of the
generator.
4．DO NOT install steam bath generators or pipes in an unheated
attic or any place where water may freeze.
5．DO NOT install the steam bath generator near flammable or
corrosive materials or chemicals (such as gasoline, paint thinner, etc.).
Must avoid installation in areas with high chlorine concentration (such as
swimming pool room).
6．The steam generator can be installed on the wall or on the
ground, but it must be firm. The steam generator should be installed as
close as possible to the bathtub or bathroom. To fix the machine on a
vertical wall, first loosen the 4 screws on the cover and remove the outer
cover. There is a hole in the upper left and upper right of the cover for
fixing the machine on the wall. Close the cover after fixing. In order to
provide a good maintenance service, the sign must be placed where it can
be seen, and the machine must be installed in a place that is convenient
for maintenance. Please refer to the installation diagram below.
7．It is strictly forbidden to install the machine in an outdoor, humid,
