Ceyear 4456 Series User manual

4456 Series

Digital Phosphor Oscilloscope

User Manual

China Electronics Technology Instruments Co., Ltd

Foreword

Thank you for choosing the 4456 series digital phosphor oscilloscope developed and manufactured by China

Electronics Technology Instruments Co., Ltd (CETI). This product embraces complete functions, advanced

technical specifications, rich options and configuration, and breakthrough and innovative technology, which allow

you to experience more and better oscilloscope performance. Please read this manual carefully to understand and

use this oscilloscope.

We are devoted to providing for you high-quality products and first-class after-sales service with your most

concerns and demands in mind. Following the consistent tenet of “High Quality and Considerable Service”, we

are committed to provide our customers with satisfactory products and service. For any questions, please contact

us:

Tel: (+86 532) 86896691

Website: www.ceyear.com

E-mail: sales@ ceyear.com

Address: No. 98, Xiangjiang Road, Qingdao City, China

Postal code: 266555

This manual describes the applications, menu structure, operation method, precautions for use, basic working

principle, etc. of the 4456 series digital phosphor oscilloscope to help you familiarize yourself with and master the

operation methods and essentials as soon as possible. Please carefully read this manual, and operate correctly

according to the corresponding instructions.

However, due to time constraints and limitations of the author, the manual may be subject to errors or deficiencies.

We sincerely welcome your corrections! We apologize for the inconvenience caused by errors of our work!

Instructions:

This manual is the first version of the 4456 Series Digital Phosphor

Oscilloscope User Manual, with the version number of V2.0.

This manual is subject to change without notice. China Electronics

Technology Instruments Co., Ltd reserves right of final interpretation of

the content and the terms of this manual.

This manual is the property of CETI. Without CETI's permission, any

organizations or individuals shall neither alter/temper nor

duplicate/transmit this manual for profits; otherwise, CETI reserves the

right to pursue any liabilities therefrom.

Author

June 2018

Table of Contents

CHAPTER I OPERATION GUIDE...................................................................................................1

1.1 UNPACKING INSPECTION................................................................................................................ 1

1.2 SAFETY INSTRUCTIONS................................................................................................................... 1

1.2.1 Environment requirements................................................................................................................ 1

1.2.2 Selection of power cord..................................................................................................................... 1

1.2.3 Power supply requirements............................................................................................................... 2

1.2.4 Electrostatic protection (ESD).......................................................................................................... 2

1.3 AFTER-SALES MAINTENANCE....................................................................................................... 2

1.4 IDENTIFICATION IN THE MANUAL............................................................................................... 2

CHAPTER II ABOUTTHE 4456 SERIES DIGITAL PHOSPHOR OSCILLOSCOPE................4

2.1 POWER ON............................................................................................................................................ 4

2.2 OVERVIEW OF FRONT PANEL......................................................................................................... 5

2.2.1 Power button ...................................................................................................................................... 6

2.2.2 Front USB Ports................................................................................................................................. 6

2.2.3 Logic analyzer extended ports .......................................................................................................... 6

2.2.4 Waveform generator extended ports................................................................................................. 6

2.2.5 1kHz Calibration Signal.................................................................................................................... 6

2.2.6 Screen DisplayArea .......................................................................................................................... 6

2.2.7 Multipurpose Setup Area................................................................................................................... 7

2.2.8 Feature Setup Area............................................................................................................................. 7

2.2.9 Run Control Setup Area..................................................................................................................... 9

2.2.10 Horizontal System Setup Area.......................................................................................................... 9

2.2.11 Trigger System Setup Area................................................................................................................ 9

2.2.12 Vertical System Setup Area............................................................................................................. 10

2.2.13 Input Channels Area ........................................................................................................................ 10

2.3 OVERVIEW OF REAR PANEL......................................................................................................... 10

CHAPTER III VERTICAL SYSTEM.................................................................................................12

3.1 DESCRIPTION OF KEYS/BUTTONS.............................................................................................. 12

3.2 PROBE.................................................................................................................................................. 12

3.2.1 Probe port......................................................................................................................................... 12

3.2.2 Calibration of the standard passive voltage probe......................................................................... 12

3.3 CHANNEL STATUS............................................................................................................................ 13

3.4 COUPLING .......................................................................................................................................... 13

3.5 TERMINATION................................................................................................................................... 13

3.6 BANDWIDTH...................................................................................................................................... 14

3.7 PROBE SETUP.................................................................................................................................... 14

3.7.1 Attenuation....................................................................................................................................... 14

3.7.2 Probe Type........................................................................................................................................ 15

3.7.3 Probe Zero Calibrate........................................................................................................................ 15

3.8 INVERT ................................................................................................................................................ 15

3.9 FINE SCALE........................................................................................................................................ 16

3.10 VERTICAL RANGE............................................................................................................................ 16

3.11 VERTICAL OFFSET........................................................................................................................... 16

3.12 DESKEW.............................................................................................................................................. 17

CHAPTER IV HORIZONTALSYSTEM...........................................................................................18

4.1 DESCRIPTION OF KEYS/BUTTONS.............................................................................................. 18

4.2 TIME BASE.......................................................................................................................................... 18

4.3 HORIZONTAL DELAY ...................................................................................................................... 19

4.4 ZOOM................................................................................................................................................... 19

4.5 MODE................................................................................................................................................... 20

4.6 MEMORY DEPTH............................................................................................................................... 20

4.7 QUICKACQ......................................................................................................................................... 22

CHAPTER V TRIGGER SYSTEM...................................................................................................23

5.1 DESCRIPTION OF KEYS/BUTTONS.............................................................................................. 23

5.2 TRIGGER SOURCE............................................................................................................................ 23

5.3 TRIGGER TYPE.................................................................................................................................. 24

Edge trigger...................................................................................................................................................... 24

Pulse trigger ..................................................................................................................................................... 26

Runt trigger...................................................................................................................................................... 28

Sequence Trigger............................................................................................................................................. 30

Logic trigger..................................................................................................................................................... 31

Setup&Hold Times trigger.............................................................................................................................. 34

Rise/Fall Time trigger...................................................................................................................................... 35

Video and HD video trigger............................................................................................................................ 38

Serial protocol trigger (options S04 ~ S12)................................................................................................... 40

Visual trigger (zone trigger)............................................................................................................................ 40

5.4 TRIGGER HOLDOFF......................................................................................................................... 41

5.5 TRIGGER MODE................................................................................................................................ 42

5.6 TRIGGER SENSITIVITY................................................................................................................... 43

5.7 TRIGGER LEVEL............................................................................................................................... 43

5.8 AUX OUT............................................................................................................................................. 44

CHAPTER VI MEASUREMENT SYSTEM......................................................................................46

6.1 PARAMETER MEASUREMENT...................................................................................................... 46

6.1.1 Add Measurement............................................................................................................................ 47

6.1.2 Remove Measurement..................................................................................................................... 49

6.1.3 Histogram......................................................................................................................................... 50

6.1.4 Statistics............................................................................................................................................ 51

III

6.1.5 Gating ............................................................................................................................................... 52

6.1.6 Reference Levels.............................................................................................................................. 52

6.1.7 HardwareAUX On Off.................................................................................................................... 52

6.2 CURSOR MEASUREMENT.............................................................................................................. 52

CHAPTER VII MATHEMATICAL OPERATION.............................................................................54

7.1 DUALWFM MATH ............................................................................................................................ 54

7.2 FFT ........................................................................................................................................................ 54

7.3 ADVANCED MATH............................................................................................................................ 57

CHAPTER VIII DISPLAY SYSTEM ....................................................................................................60

8.1 WAVEFORM DISPLAY SETUP........................................................................................................ 60

8.2 WFM PALETTE SETTING ................................................................................................................ 60

8.3 PERSIST SETUP.................................................................................................................................. 63

8.4 GRATICULE SETUP........................................................................................................................... 63

8.5 INTENSITY SETUP............................................................................................................................ 63

8.6 XY DISPLAY ....................................................................................................................................... 64

CHAPTER IX SAVE, RECALLAND REFERENCE .......................................................................66

9.1 SAVE..................................................................................................................................................... 66

9.2 RECALL............................................................................................................................................... 68

9.3 REFERENCE........................................................................................................................................ 68

CHAPTER X SYSTEM CONFIGURATION...................................................................................71

10.1 CONFIG................................................................................................................................................ 71

10.2 REFERENCE&AUX OUT.................................................................................................................. 72

10.3 NETWORK CONFIGURATION........................................................................................................ 73

10.4 OPTIONS.............................................................................................................................................. 74

10.5 CALIBRATION.................................................................................................................................... 74

10.6 SYSTEM WRITE PROTECTION...................................................................................................... 75

CHAPTER XI PROTOCOLANALYZER (OPTION)......................................................................76

11.1 I2C TRIGGER AND ANALYSIS ....................................................................................................... 76

11.1.1 I2C bus setting ................................................................................................................................. 76

11.1.2 I2C trigger setup .............................................................................................................................. 80

11.2 RS232/RS422/RS485/UART TRIGGER AND ANALYSIS............................................................. 84

11.2.1 RS232 bus setting ............................................................................................................................ 85

11.2.2 RS232 trigger setup ......................................................................................................................... 90

11.3 SPI PROTOCOL TRIGGER AND ANALYSIS................................................................................. 92

11.3.1 SPI bus setting.................................................................................................................................. 93

11.3.2 SPI trigger setup............................................................................................................................... 99

11.4 CAN TRIGGER AND ANALYSIS................................................................................................... 100

11.4.1 CAN bus setup............................................................................................................................... 101

11.4.2 CAN trigger setup.......................................................................................................................... 105

11.5 LIN TRIGGER AND ANALYSIS..................................................................................................... 109

11.5.1 LIN bus setup..................................................................................................................................110

11.5.2 LIN trigger setup.............................................................................................................................114

11.6 FLEXRAY PROTOCOL TRIGGER AND ANALYSIS...................................................................117

11.6.1 FlexRay bus setting.........................................................................................................................118

11.6.2 FlexRay trigger setting .................................................................................................................. 123

11.7 AUDIO TRIGGER AND ANALYSIS.............................................................................................. 129

11.7.1 Audio bus setup.............................................................................................................................. 130

11.7.2 Audio trigger setup........................................................................................................................ 136

11.8 USB TRIGGER AND ANALYSIS ................................................................................................... 138

11.9.1 USB bus setting.............................................................................................................................. 138

11.9.2 USB trigger setup........................................................................................................................... 142

11.9 MIL-STD-1553 TRIGGER AND ANALYSIS................................................................................. 147

11.9.1 MIL-STD-1553 setup.................................................................................................................... 147

11.9.2 MIL-STD-1553 trigger setup........................................................................................................ 151

CHAPTER XII LIMIT/MASK TEST (OPTION).............................................................................156

12.1 SET UP MASK................................................................................................................................... 156

12.2 SELECT MASK................................................................................................................................. 157

12.3 SET UP TEST..................................................................................................................................... 158

12.4 RUN TEST.......................................................................................................................................... 159

12.5 SHOW RESULTS............................................................................................................................... 159

CHAPTER XIII POWER MEASUREMENTAND ANALYSIS (OPTION)....................................160

13.1 MEASUREMENT TYPE .................................................................................................................. 160

13.2 POWER QUALITY ........................................................................................................................... 160

13.2.1 Define Inputs...................................................................................................................................... 160

13.2.2 Measurement Display ........................................................................................................................ 161

13.2.3 Frequency Reference.......................................................................................................................... 162

13.3 RIPPLE................................................................................................................................................ 162

13.3.1 Define Inputs...................................................................................................................................... 162

13.3.2 Source ................................................................................................................................................. 163

13.4 HARMONICS .................................................................................................................................... 163

13.4.1 Define Inputs...................................................................................................................................... 163

13.4.2 Setup.................................................................................................................................................... 163

13.4.3 Display................................................................................................................................................ 164

13.5 SWITCHING LOSS........................................................................................................................... 165

13.5.1 Define Inputs...................................................................................................................................... 165

13.5.2 Measurement Display ........................................................................................................................ 166

13.5.3 Conduction Calculation ..................................................................................................................... 166

13.5.4 Reference Levels................................................................................................................................ 167

13.6 MODULATION.................................................................................................................................. 167

13.6.1 Define Inputs...................................................................................................................................... 168

13.6.2 Source ................................................................................................................................................. 168

13.6.3 Modulation Type ................................................................................................................................ 168

13.7 SAFE OPERATING AREA............................................................................................................... 169

13.7.1 Define Inputs...................................................................................................................................... 169

13.7.2 DefineAxes ........................................................................................................................................ 169

13.7.3 Define Mask ....................................................................................................................................... 170

13.7.4 Violation Stop..................................................................................................................................... 171

CHAPTER XIV LOGICANALYZER (OPTION) .............................................................................172

14.1 ENABLE/DISABLE DIGITAL LOGIC........................................................................................... 172

14.2 CHANNEL SWITCH......................................................................................................................... 173

14.3 RUNT PULSE THRESHOLDS ........................................................................................................ 174

14.4 EDIT LABEL...................................................................................................................................... 175

CHAPTER XIV WAVEFORM GENERATOR (OPTION)................................................................177

15.1 WAVEFORMS.................................................................................................................................... 177

15.1.1 Sine................................................................................................................................................. 178

15.1.2 Square............................................................................................................................................. 179

15.1.3 Ramp............................................................................................................................................... 180

15.1.4 Pulse................................................................................................................................................ 180

15.1.5 DC................................................................................................................................................... 181

15.1.6 Noise............................................................................................................................................... 182

15.1.7 Arbitrary......................................................................................................................................... 182

15.1.8 Built-in............................................................................................................................................ 185

15.2 MODULATION.................................................................................................................................. 186

15.2.1 Modulation Type............................................................................................................................ 186

15.2.2 Frequency/FSK Rate...................................................................................................................... 187

15.2.3 Shape .............................................................................................................................................. 187

15.2.4 Modulation switch ......................................................................................................................... 188

15.3 PREVIEW........................................................................................................................................... 188

15.4 OUTPUT............................................................................................................................................. 188

CHAPTER XVI OSCILLOSCOPE PROBE (OPTION) ...................................................................189

16.1 P9350A PASSIVE VOLTAGE PROBE............................................................................................ 189

16.1.1 Operating Instructions ................................................................................................................... 189

16.1.2 Main Parameters of Probe............................................................................................................. 190

16.2 P9550A PASSIVE VOLTAGE PROBE............................................................................................ 190

16.2.1 Operating Instructions ................................................................................................................... 190

16.2.2 Main Parameters of Probe............................................................................................................. 191

16.3 P9551 PASSIVE VOLTAGE PROBE............................................................................................... 192

16.3.1 Operating Instructions ................................................................................................................... 192

16.3.2 Main Parameters of Probe............................................................................................................. 193

16.4 P9600A PASSIVE VOLTAGE PROBE............................................................................................ 194

16.4.1 Operating Instructions ................................................................................................................... 194

16.4.2 Main Parameters of Probe............................................................................................................. 195

16.5 P9558 PASSIVE VOLTAGE PROBE............................................................................................... 196

16.5.1 Operating Instructions ................................................................................................................... 196

16.5.2 Main Parameters of Probe............................................................................................................. 197

16.6 P3258 HIGH VOLTAGE SINGLE END PROBE ........................................................................... 198

16.6.1 Operating Instructions ................................................................................................................... 198

16.6.2 Main Parameters of Probe............................................................................................................. 199

16.7 P4220 HIGH VOLTAGE SINGLE END PROBE ........................................................................... 200

16.7.1 Instructions for Safe Use............................................................................................................... 200

16.7.2 Operating Instructions ................................................................................................................... 201

16.7.3 Main Parameters of Probe............................................................................................................. 202

16.8 P8050 HIGH VOLTAGE DIFFERENTIAL PROBE....................................................................... 203

16.8.1 Instructions for Safe Use............................................................................................................... 203

16.8.2 Operating Instructions ................................................................................................................... 203

16.8.3 Main Parameters of Probe............................................................................................................. 205

16.9 P8100 HIGH VOLTAGE DIFFERENTIAL PROBE....................................................................... 206

16.9.1 Instructions for Safe Use............................................................................................................... 206

16.9.2 Operating Instructions ................................................................................................................... 206

16.9.3 Main Parameters of Probe............................................................................................................. 209

16.10 P5020 HIGH VOLTAGE DIFFERENTIAL PROBE....................................................................... 209

16.10.1 Instructions for Safe Use............................................................................................................... 210

16.10.2 Operating Instructions ................................................................................................................... 210

16.10.3 Main Parameters of Probe..............................................................................................................211

16.11 P6100 HIGH VOLTAGE DIFFERENTIAL PROBE....................................................................... 212

16.11.1 Instructions for Safe Use............................................................................................................... 212

16.11.2 Operating Instructions ................................................................................................................... 212

16.11.3 Main Parameters of Probe............................................................................................................. 213

16.12 P7100 HIGH VOLTAGE DIFFERENTIAL PROBE....................................................................... 214

16.12.1 Instructions for Safe Use............................................................................................................... 214

16.12.2 Operating Instructions ................................................................................................................... 214

16.12.3 Main Parameters of Probe............................................................................................................. 215

16.13 AP202 CURRENT PROBE............................................................................................................... 216

16.13.1 Instructions for Safe Use............................................................................................................... 216

16.13.2 Operating Instructions ................................................................................................................... 216

16.13.3 Main Parameters of Probe............................................................................................................. 217

16.14 AP204A CURRENT PROBE............................................................................................................ 218

16.14.1 Instructions for Safe Use............................................................................................................... 218

VII

16.14.2 Operating Instructions ................................................................................................................... 219

16.14.3 Main Parameters of Probe............................................................................................................. 220

16.15 AP622 CURRENT PROBE............................................................................................................... 220

16.15.1 Instructions for Safe Use............................................................................................................... 220

16.15.2 Operating Instructions ................................................................................................................... 221

16.15.3 Main Parameters of Probe............................................................................................................. 222

16.16 AP622D CURRENT PROBE............................................................................................................ 222

16.16.1 Instructions for Safe Use............................................................................................................... 222

16.16.2 Operating Instructions ................................................................................................................... 222

16.16.3 Main Parameters of Probe............................................................................................................. 223

16.17 AP621 CURRENT PROBE............................................................................................................... 224

16.17.1 Instructions for Safe Use............................................................................................................... 224

16.17.2 Operating Instructions ................................................................................................................... 224

16.17.3 Main Parameters of Probe............................................................................................................. 225

CHAPTER XVII DIGITALVOLTMETER..........................................................................................227

CHAPTER XVIII WORKING PRINCIPLE..........................................................................................228

CHAPTER XIXAPPLICATION EXAMPLES ...........................................................................................230

19.1 MEASURING SIMPLE SIGNAL .................................................................................................... 230

19.2 MEASURING PULSE SIGNAL....................................................................................................... 230

19.3 VIEWING PHASE DIFFERENCE BETWEEN TWO SIGNALS................................................. 231

19.3.1 XY Measurement Method............................................................................................................. 231

19.3.2 Parameter Automatic Measurement Method................................................................................ 232

19.4 I2C TRIGGER AND ANALYSIS EXAMPLE................................................................................. 232

19.5 CAN TRIGGER AND ANALYSIS EXAMPLE.............................................................................. 233

19.6 LIN TRIGGER AND ANALYSIS EXAMPLE................................................................................ 234

19.7 FLEXRAY TRIGGER AND ANALYSIS EXAMPLE.................................................................... 236

19.8 RS232 TRIGGER AND ANALYSIS EXAMPLE ........................................................................... 238

19.9 SPI TRIGGER AND ANALYSIS EXAMPLE................................................................................. 239

19.10 AUDIO TRIGGER AND ANALYSIS EXAMPLE ......................................................................... 240

19.11 USB TRIGGER AND ANALYSIS EXAMPLE............................................................................... 242

19.12 1553 TRIGGER AND ANALYSIS EXAMPLE............................................................................... 243

CHAPTER XX FAULT DETECTIONAND TROUBLESHOOTING.....................................................245

APPENDIX 1: TECHNICAL SPECIFICATIONS......................................................................................246

APPENDIX 2: ACCESSORIES AND OPTIONS........................................................................................254

VIII

Table of contents

Other Ceyear Test Equipment manuals

Ceyear

Ceyear 4992A User manual

Ceyear

Ceyear 6419 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual