CEM Systems Card Reader S610s User manual
www.cemsys.com
OVERVIEW
The S610s Card Reader is designed for use as part of an integrated on-line access
control system and is used to control access to restricted areas or in special
applications where card activation of machinery is required.
Using a powerful 32bit processor, the S610s gives full off-line validation and decision
making at the point of entry, even when host communication is not available.
Designed for use with all card technologies the S610s device is available with integral
reading support for 125 KHz HID Proximity, 13.56 MHz MiFare and PicoPass smartcard
as well as a multi-technology option to support Proximity + MiFare. Two additional
wiegand inputs are also available for connecting other reading technologies externally
or an Exit read head for IN/OUT control.
The IP 65 rated polycarbonate enclosure houses the reader electronics, a large 4x3
Keypad, graphical display screen and three LED indicators.
The reader has 4 analogue inputs, which can be used to monitor door and alarm
conditions for transmission to the host computer. Two outputs are also available to
control the activation of locks or other equipment.
S610s Reader
•Industry’smostadvancedcard
reader
•Integralreadingtechnologyfor
Proximity, MiFare, Proximity +
MiFare or Inside PicoPass.
•Structureddatabaseallowsstorage
of large amounts of cardholder
records for off-line card validation
•BacklitMonochromeGraphics
LCD display with heating element
provides localised character sets
and instantly recognisable icons
under the most extreme conditions
•UniversalReader-supportsallcard
technologies
•Keypadforcongurationand
optionalpersonnelIdentication
Number (PIN)
•4analogueinputstomonitoralarm
conditions and 2 changeover relay
outputs to activate door strike or
other equipment
•Remoteprogrammingfacilityto
download program
•BroadcastFacilitytoenable
selective operational mode
FEATURES
S610s Reader
Multi-technology Intelligent Serial Reader
PHYSICAL
Size 142 x 115 x 44mm (5.6 x 4.5 x 1.7”)
Weight 370g (13oz) with connectors
Housing Flame retardant polycarbonate containing
fully encapsulated electronics.
Colour DarkandLightGrey
Power
- Voltage 9 – 14Vdc
- Current
Consumption 200mA (passive), 320mA (peak)
ENVIRONMENTAL
IP Rating IP65
Temperature -20° to 50°C (-4° to 122°F)
Humidity Unlimited, also condensing
LED Indicators Three high intensity LED indicators red,
amber and green
LCDIndicators 32x122dotsMonochromeGraphics
supertwist LCD with backlight
Keypad 12 character, standard layout, tactile or
non-tactile response keypad.
FUNCTIONALITY
Inputs Four analog inputs – voltage supplied
Outputs Two relays fitted – Changeover volt free
contacts
- Rating 30Vdc @ 5A
- Duration Programmable
Suppression device (diode, MOV, etc.)
required at load
Memory 2MBbatterybackedmemory
CompactFlash 32MBTypical(Optional)
Database
BatteryBackup 3.0VrechargeableLithium-Ion
- Cardholders Storage of up to 219,000 cardholders at
the door.
- Transactions Up to 50,000 transactions in offline
operation.
Configuration Operational parameters are downloaded
from host computer. Some configuration
setting can also be set using the keypad.
Standard Door
Operating Modes Door Access, Passenger, Turnstile,
Verification, Manned Control Post,
Equipment Enable
COMMUNICATION INTERFACE
To Exit Reader RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
Connection 2 part JST Connector
To Host Controller RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
Connection 2 part JST Connector
PRODUCT CODES
RDR/611/101 S610s 125khz HID Prox
RDR/611/105 S610s 13.56MHz MiFare
RDR/611/104 S610s Prox & MiFare (Multi-tech)
RDR/611/106 S610s PicoPass™
RDR/611/109 S610s External Read Head
CEMSystemsLtdUnit4RavenhillBusinessParkRavenhillRoadBelfastBT68AWNorthernIreland
PRODUCTHIGHLIGHTS
CEM/B/021
Productspecicationsandavailabilityissubjecttochangewithoutnotice.Certainproductnamesmentionedhereinmaybetradenames
and/or registered trademarks of their companies.
TECHNICAL SPECIFICATIONS
Host Communications
The S610s has an RS485 serial port allowing it to
communicate directly with the host AC2000 controller.
Onboard Card Reading Technologies
The S610s supports onboard head technologies for 125 KHz
Proximity, 13.56 MHz MiFare and Inside PicoPass, as well as
a multi technology version supporting Proximity + MiFare.
Other technologies can be supported using the two available
onboard Wiegand connections.
Proximity to MiFare Smartcard Migration
The S610s multitech version supports the simultaneous
reading of both traditional Proximity and MiFare cards.
The enables existing sites using proximity card to migrate
to MiFare smartcards with zero system downtime and no
reduction in security. The MiFare card can be used for other
applicationssuchascashlessvending,Biometricstorage,
logical access, etc.
Off-line Card Validation
Thecarddatabaseisinitiallydownloadedtothereader’s
memory from the host computer with subsequent changes to
card data automatically sent as updates. This ensures that
the reader has up-to-date card information when operating in
off-line mode. Operating in off-line mode the reader can hold
in excess of 200,000 cards.
Reader Messages
The S610s has a large graphical LCD which is used to
displayanumberofpredenedmessagestocardholders
depending on their privileges e.g. Wrong Zone, Lost/Stolen
Card,CardAbouttoExpire,AccessGrantedetc.Messagesto
bedisplayedbytheS610scanbemodiedbytheAC2000
software or translated into local languages.
Remote Programming
The S610s reader may be remotely programmed from the
host computer, eliminating the need to physically replace
rmware,givingincreasedsystemexibilityandefciency.
Operational parameters, e.g. door open time, can also be
downloaded to the reader.
This manual suits for next models
1
Table of contents
Other CEM Systems Card Reader manuals
