4. If pairing is successful, the redLED will stop flashing and only the
blue LED will remain lit. The IDof the other Bluetooth stereo device
will be stored in the memory ofthe STB-3131, so that pairing will
not be necessary the next time thedevice is used.
Pairing when used as anAV Dongle
1. Connect the STB-3131 with your PC viathe USB port and the adapter
cable (supplied). The STB-3131 will automatically begin charging
mode. The green LED will light, andthe blue LED will begin flashing.
After about 5 seconds, the red andblue LEDs will flash together and
the unit is now in pairing mode(no need to use the Control Button).
2. Put together (within 30cm) the BluetoothStereo Device that you
want to pair with the STB-3131
3. Start the search function of thestereo device to be paired with.
Please refer to the User's Manual ofthe device for more information.
8
Operating Instructions:
Bluetooth device
Bluetooth
<30 cm>
8 seconds
®
3. Start the search function of theBluetooth stereo device to be paired
with. Please refer to the User's Manualof the device for more
information. The STB-3131 will automatically pair with thedevice,
and no access code is required.
7
Operating Instructions:
1. Place the STB-3131 within 30cm ofthe device you want to pair with.
2. Make sure the STB-3131 is off. Press and hold the Control Button for
about 8 seconds, until the blue andred indicators begin to flash. The
unit is now in pairing mode.
Pairing when using the 3.5mm StereoPlug
