Celestron PowerSeeker 76 User manual

Use the three tightening screws located at the

bottom of each leg to secure the extended legs

in place. All three legs should be the same

length to provide a level platform for the

telescope.

To set up the tripod, spread the legs outward

until they are fully extended and push down

center locking brace. Extend the center portion

of each of the three tripod legs down 6-8".

Quick Set-up Guide

123

Once the tripod legs have been extended, it

may be necessary to tighten the nuts at the

top of each leg so they are tight & secure.

Secure the tube to the mount using the two

threaded mounting bolts. Tighten to secure in

place.

Locate the optical tube and line up the tube

with the holes on the mount.

Insert the slow motion control rod into the

eyebolt attached to the altazimuth mount.

Secure slow motion control rod to telescope

tube by attaching the included bolt and

tightening.

PowerSeeker 76

Your PowerSeeker 76 includes: optical tube with

two threaded mounting bolts; tripod with center

support bracket & yolk mount attached; two

eyepieces; a 3x barlow lens, finderscope; slow

motion control rod; eyepiece accessory tray; multi-

tool (see step #7); The Sky™ CD software;

documentation including an owner’s manual.

Item# 21044

Place the accessory tray on top of tripod's

center leg brace. Thread the tray into the

threaded hole in the center of the leg brace.

Questions or Problems with Set-up?

CONTACT:

Celestron Technical Support: 310.803.5955

Quick Set-up Guide [cont]

Properly assembled, the tube should appear

as pictured above.

Locate the finderscope. Remove the knurled

nuts on the threaded posts at the focuser end

of the telescope tube.

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser. Remove the plastic cap covering the

end of the focuser.

Locate the 20mm eyepiece and remove the

plastic covers. Insert the chrome barrel of the

eyepiece into the focuser and secure in place

by tightening the set screw.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.

For additional magnification, you can use the

included 3x barlow. Place the barlow in the

focuser in place of the eyepiece and tighten

set screw -- remove the cap from the barlow.

Insert the chrome barrel of the 20mm

eyepiece into the barlow and tighten the set

screw to secure in place.

Orient the finderscope so that the larger lens is

facing towards the front of the tube. Place

finderscope over the posts on the tube and

replace knurled nuts.

For detailed usage

information please

consult your owner’s

manual.

This manual suits for next models

Other Celestron Telescope manuals

Celestron

Celestron PowerSeeker 114EQ User manual

Celestron

Celestron StarSense Explorer DX 130AZ User manual

Celestron

Celestron Ultima 2000 User manual

Celestron

Celestron 91075 User manual

Celestron

Celestron NexStar GPS 93507 User manual

Celestron

Celestron 12-36x50mm User manual

Celestron

Celestron Super C8 User manual

Celestron

Celestron 52238 User manual

Celestron

Celestron FirstScope 90EQ User manual

Celestron

Celestron StarSense Explorer DOB User manual

Celestron

Celestron Onyx80EDF User manual

Celestron

Celestron POWERSEEKER 80 EQ User manual

Celestron

Celestron PowerSeeker 50AZ User manual

Celestron

Celestron NexStar 6 SE User manual

Celestron

Celestron C11-SGT User manual

Celestron

Celestron LCM Series User manual

Celestron

Celestron 22453 User manual

Celestron

Celestron FirstScope 114EQ User manual

Celestron

Celestron NexStar 4 SE User manual

Celestron

Celestron PowerSeeker 40AZ User manual

Celestron

Celestron TrailSeeker User manual

Celestron

Celestron 15-60x60mm User manual

Celestron

Celestron TRAVEL SCOPE 60 User manual

Celestron

Celestron 21065 User manual

Popular Telescope manuals by other brands

Meade

Meade 81005 Condor instruction manual

Meade

Meade 114 EQ-DS instruction manual

Meade

Meade LX200 CLASSIC instruction manual

Leica

Leica 82 HD Specifications

EASTCOLIGHT

EASTCOLIGHT 9920 instruction manual

zoomion

zoomion Genesis 200 EQ instructions

TEC

TEC APO 140 owner's manual

Orion

Orion 7832 manual

Carson

Carson Skelescope SK-100 instruction manual

SKY-WATCHER

SKY-WATCHER VIRTUOSO instruction manual

Orion

Orion EZ Finder 7228 manual

cassini

cassini C-JRS operating instructions

nedis

nedis SCTE5060WT quick start guide

Meade

Meade Polaris 60EQ-D instruction manual

PlaneWave

PlaneWave CDK700 manual

William Optics

William Optics Synta Crayford user guide

Orion

Orion FUNSCOPE instruction manual

Levenhuk

Levenhuk Skyline Travel user manual