CEL-FI Go User manual
I
CEL-FI GO QUICK START GUIDE
CEL-FI GO is an evolved cellular signal booster design that can
amplify cellular signals up to 100 dB. Connect a single Donor
Antenna to receive the macro-network signals, and then a single
indoor Service Antenna where you need service, and CEL-FI GO
will do the rest automatically.
Find the location
with the best signal.
Install Donor Antenna
where the mobile device
receives this signal.
2
Install Donor Antenna
Install Service Antenna
SAFETY: DO NOT INSTALL any equipment close to power lines
or drill into walls or other structural elements without rst ensuring
the location is safe and that there are no hidden items that could
cause injury.
Install Service Antenna
where coverage is needed.
SMART SIGNAL BOOSTER www.Cel-Fi.com
SERVICE
ANTENNA
DONOR
ANTENNA
STATIONARY VERSION
DONOR ANTENNA NOT INCLUDED
SERVICE ANTENNA NOT INCLUDED
STATIONARY
Press the MODE button on the unit to select desired
scanning mode. Status Indicator will blink during the
setup process, and may take a few minutes to complete.
(OPTIONAL: use your smartphone to select mode.
Download the CEL-FI WAVE app, and follow the
on-screen instructions.)
4Connect Donor & Service Antennas
to the CEL-FI GO Unit
5Plug in CEL-FI GO & Select Mode
6Tips & Tricks
7Installation Process
3Mount CEL-FI GO Near Power Outlet
Find a power outlet. Mount CEL-FI GO
near the power outlet.
DO NOT plug in at this time.
Keep Donor and Service antennas
separated/isolated from each other
for best performance
Do not use cable splitters for
antennas
Follow the installation instructions
for your chosen antennas
Use sealant if any connections are
exposed to elements
NETWORK STRENGTH
For more CEL-FI GO features, go to App Store or Google
play and download the mobile CEL-FI WAVE app.
(NOTE: If you do not have a compatible smartphone,
go to cel-.com/wave to download the Desktop app.)
LEFT SIDE: Service Antenna Connector
TOP VIEW
RIGHT SIDE: Donor Antenna Connector
SMART SIGNAL BOOSTER www.Cel-Fi.com
STATUS
INDICATOR
MODE
(*NOTE: if Error, go to troubleshooting at
cel-.com/support)
AUTO
3G
4G/4GX
MODE
SELECT
BUTTON
MODE
Boosting 3G
Boosting 4G
Error*
STATUS
INDICATOR
STATUS
INDICATOR
Table of contents
Other CEL-FI Extender manuals
CEL-FI
CEL-FI RS2 Dual Band User manual
CEL-FI
CEL-FI G32-2 User manual
CEL-FI
CEL-FI DUO User manual
CEL-FI
CEL-FI QUATRA 4000 User manual
CEL-FI
CEL-FI GO RED G32-12 User manual
CEL-FI
CEL-FI DUO User manual
CEL-FI
CEL-FI G32-2/4/5/12/13X User manual
CEL-FI
CEL-FI G32-2X User manual
CEL-FI
CEL-FI GO Operating and maintenance instructions
CEL-FI
CEL-FI GO X User manual
