Cefndy T220 User manual
User Instructions for the Tilt in Space Toileting
Showering Chair T220
Ref: T220 June 2020
Form No: Cef 0035
Introduction
Congratulations on your purchase of the Cefndy
Healthcare T220 Tilt in Space
Toileting/Showering Commode Chair. Please
ensure you read and understand these
instructions in full before construction and use.
Please retain these for future reference.
This chair is designed for those with more
complex support requirements. It provides
comfort, safety and easy access for washing and
toileting and can be reclined up to 30 degrees.
The neck support is fully adjustable and can be
positioned at any angle for maximum user
comfort. A lap strap is included for added safety.
The chair features footplates that can be
independently inclined to suit the user’s
requirements. The frame is manufactured from
powder coated aluminium with PU seat and back
for patient comfort. The PU seat can be removed
for ease of cleaning. Also, the potty holder is
integrated into the PU seat. Both arms fold up to allow lateral transfers.
Specifications
Overall Height with Neck Brace Fully Extended
1360mm
Overall Width
560mm
Overall Depth with Footplates
890mm
Seat Height
535mm
Seat Depth
420mm
Seat to top of Back
485mm
Orifice Depth & Width
266 x 190mm
Potty Diameter
300mm
Width Between Arms
460mm
Tilt Angle
30°
Belt Length
1115mm
Maximum User Weight
159kg / 25st
User Instructions for the Tilt in Space Toileting
Showering Chair T220
Ref: T220 June 2020
Form No: Cef 0035
Pack Contents
Inside the box you should find:
Tilt in Space Toileting /
Showering Chair
Commode Potty
Easy Clean PU Back
Easy Clean PU Seat
Slot in Plug
Lap Belt
User Instructions (this leaflet)
Assembly Instructions
Please note:
When unpacking carefully examine the product to ensure it is complete. See
contents list above.
Before you begin assembly check for any damage. If damaged please contact
your supplier and refrain from using the product.
Do not attempt to use if the product is damaged.
Assembly:
Put the seat belt on the backrest tube and assemble the backrest tube to the
frame; using M8 knob to fix backrest on the frame; put the brake wire to C
clip.
Take out the castors from the carton and assemble on the frame. Front and
rear castors are all swivel castor with brake, using E clip to fix the position.
Take the footplates out and put it on the frame, sway it inside.
The footplates can be adjusted to an angle if necessary. Using Allen wrench
to loosen the screw, adjust the angle and lock the screw.
Place the PU headrest to fixed set on the push bar. The headrest can be
adjusted to a different angle; the knob is controlled by the distance of the
headrest.
User Instructions for the Tilt in Space Toileting
Showering Chair T220
Ref: T220 June 2020
Form No: Cef 0035
Correct Use
The armrest can be swayed up and down by the user.
Footplates can be folded by pressing the lever control to make the footplate
go out. To return the footplate position, push the footplate from outside to
inside.
To use the commode, take off the seat cover, pull the commode from the
back, remove the commode lid and place the commode back to use.
The seat angle can be reclined by pressing the lever control on the handle
and pushing down. To return the chair to the seating position, press the lever
control.
Please empty the potty at regular intervals and be aware of its maximum
capacity.
Health & Safety
Customer/User Please Note: Do not attempt to move the product if the castors are
locked. This is because the castors are on an expansion bolt, not a pin clip –with the
expanding bolt they could become undone if turned whilst the brake is on.
Cleaning
Use mild detergent with warm water to wipe down framework on at least a
weekly basis more frequently if required.
Do not use an abrasive cleaner as this may damage the frame and invalidate
your warranty.
It is recommended that the potty is thoroughly cleaned after every use, using
an appropriate cleaning agent.
Keep the painted surface clean from oil.
Use of power/jet washing & industrial washing machines:
If either of the above is used to clean equipment care must be taken since
high-pressure water can be penetrative.
Care should be taken that frames are not placed too close to high-pressure
water jets.
After cleaning ensure any residual water is removed from the framework as it
could cause permanent rusting of the frame (leave frames open in a warm
environment for several hours to ensure all internal moisture evaporates).
We cannot offer advice on industrial washing machines with regards to
specific machine settings, as these will be dependent on the manufacturer’s
instructions.
User Instructions for the Tilt in Space Toileting
Showering Chair T220
Ref: T220 June 2020
Form No: Cef 0035
Maintenance Requirements
The product should be checked on a regular basis for damage or wear and
tear –this includes flaking or cracking paint. Any undue signs of damage
should be noted and reported to the supplier in the first instance. Should
damage be evident, then the user should refrain from using the product until
advice has been sought from the supplier.
Check the product every three months: clean the castors, tighten the screws
and check the brake functions on the castors.
Warning
This product is intended for users of a maximum of 159kg/25 stone in weight.
We recommend a full risk assessment should be carried out before use.
Under no circumstance should the commode be moved whilst occupied.
It is advised that the frame is checked periodically for signs of wear and tear.
Any problems please report to your supplier immediately.
Please make sure E clip goes through tubing and the castor is well fixed to
prevent the E clip coming off and causing the castors to slant.
Warranty
This product carries a 12 month warranty from the date of purchase against
manufacturing defects. Misuse or damage is not covered. This warranty does not
affect your statutory rights. As manufacturers we cannot specify expected product
life as this is based on the level of usage, however we can advise that this product
has been designed, manufactured and independently tested in the UK (including
cyclic testing to represent real life usage).
Disposal Instructions
Appropriate hygiene standards should be applied before disposal to reduce
the risk of infection.
Materials used are essentially non-hazardous and can be disposed of
appropriately.
Contact Details
We have attempted to cover most eventualities, however if you have any specific
queries, please contact: Cefndy Healthcare
Cefndy Road
Rhyl
Denbighshire
LL18 2HG
Tel:01824 706005
E-mail: [email protected]
Table of contents
Other Cefndy Mobility Aid manuals
Popular Mobility Aid manuals by other brands
Rhythm Healthcare
Rhythm Healthcare B3800F manual
AMF-BRUNS
AMF-BRUNS PROTEKTOR installation manual
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Instructions for use
Rhythm Healthcare
Rhythm Healthcare C500U Assembly and Fitting Instructions
Lumex
Lumex RJ4200A manual
Rebotec
Rebotec Jumbo user manual