Casio Camera User manual

OTHER SETTINGS

117

OTHER SETTINGS

Configuring Sound Settings

You can configure different sounds to play whenever you

turn on the camera, press the shutter release button half-

way or all the way, or perform a key operation.

To configure sound settings

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “Sounds”, and

then press [].

Use [] and [] to

select the sound

whose setting you

want to configure, and

then press [].

Select this setting:

Sound 1 through Sound 5

Off

To do this:

Select a built-in sound

Turn off the sound

NOTE

•The default sound setting for all operations is “Sound

1”.

Use [] and [] to change the setting, and

then press [SET].

OTHER SETTINGS

118

To set the volume level

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “Sounds”, and

then press [].

Use [] and [] to select “Volume”.

Use [] and [] to specify the volume setting

you want, and then press [SET].

•You can set the volume in the range of 0 (no sound)

to 7 (loudest).

NOTE

•The initial default volume setting is 3.

Specifying an Image for the Startup Screen

You can specify an image you recorded as the startup

screen image, which causes it to appear on the monitor

screen for about two seconds whenever you turn on the

camera while the mode selector is aligned with “REC”.

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “Startup”, and

then press [].

Use [] and [] to display the image you want

to use as the startup image.

Use [] and [] to change the setting, and

then press [SET].

Select this setting:

Off

To do this:

Use the currently displayed image

as the startup screen image

Disable the startup screen

OTHER SETTINGS

119

IMPORTANT!

•You can select any one of the following types of

image as the startup image.

—The camera’s built-in startup image

—A snapshot you recorded with the camera

—An audio snapshot you recorded with the camera

•The snapshot image that you select as the startup

image is stored in a special memory location called

“startup image memory”. Only one image can be

stored in startup image memory at one time.

Selecting a new startup image overwrites anything

that is already stored in startup image memory.

Because of this, if you want to return to a previous

startup image, you need to have a separate copy of

that image in the camera’s standard image memory.

•The startup image is deleted by the format operation

(page 128).

•If you store an audio snapshot to startup image

memory, the image’s audio is not played when the

image is displayed at startup.

Configuring Power Down Image Settings

With the Power Down Image feature, you can configure the

camera so a specific image stored in camera image

memory appears whenever you turn off power. You can

specify a snapshot as the power down image.

■ To configure power down image settings

Use the USB cable to connect the camera to

your computer (page 136).

Move the image data that you want to use for

the power down image to the top (root)

directory of the camera’s built-in Flash

memory.

•The file name extension will not be displayed if your

computer is configured to hide file name extensions.

Example: CIMG0001

•If your power down image is stored on a memory

card, be sure to copy the image to built-in memory

before removing the memory card from the camera.

OTHER SETTINGS

120

Change the name of the file to one of the

following.

Snapshot Image: ENDING.JPG

•Input the following file name only (without file name

extension) if your computer is configured to hide file

name extensions.

File Name: ENDING

•Your camera is now configured to display a power

down image. The power down image will appear any

time you press the power button to turn off the

camera. The power down image appears regardless

of whether or not your camera has a memory card

loaded in it.

IMPORTANT!

•Only a snapshot (JPEG) file can be used as the

power down image.

•Note that the Power Down Image feature works only

with images recorded with this camera. The Power

Down Image feature may not operate properly when

another type of image is specified as the power down

image.

•Formatting the camera’s Flash memory deletes the

power down image.

OTHER SETTINGS

121

■ To cancel Power Down Image settings

Use the USB cable to connect the camera to

your computer (page 136).

Change the name of the current power down

image from ENDING.JPG to something else,

or delete the current power down image from

Flash memory.

Specifying the File Name Serial Number

Generation Method

Use the following procedure to specify the method for

generating the serial number used for file names (page 105).

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “File No.”, and

then press [].

Use [] and [] to change the setting, and

then press [SET].

Select this setting:

Continue

Reset

To do this for a newly saved file:

Store the last file number used and

increment it, regardless of whether

files are deleted or whether the

memory card is replaced with a new

one

Find the highest file number in the

current folder and increment it

OTHER SETTINGS

122

Using the Alarm

You can configure up to three alarms that cause the

camera to beep and display a specified image at the time

you specify.

To set an alarm

In the PLAY mode, press [MENU].

Select the “PLAY”tab, select “Alarm”, and

then press [].

Use [] and [] to select the alarm whose

setting you want to configure, and then press

[].

Use [] and [] to select the setting you want

to change, and then use [] and [] to

change the selected setting.

•You can set an alarm time and configure the alarm to

sound either once or at the same time everyday. You

can also turn the alarm on or off.

Press [DISP].

•You could press [SET] in place of [DISP] if you want

to configure the alarm without an image.

Use [] and [] to select the scene you want

to appear at the alarm time, and then press

[SET].

After all the settings are the way you want,

press [SET].

•You can configure up to three alarms, named “Alarm

1”, “Alarm 2”, and “Alarm 3”.

OTHER SETTINGS

123

Stopping the Alarm

When an alarm time is reached while the camera is turned

off, the alarm will sound for about one minute (or until you

stop it), and then the camera will turn on. To stop the alarm

after it starts to sound, press any button. If the camera is

on the USB cradle when an alarm sounds, you can stop it

by pressing the USB cradle [USB] button or [PHOTO]

button, or any camera button.

IMPORTANT!

•Note that the alarm does not sound if the alarm time

is reached when any one of the following conditions

exists.

—While the camera is turned on

—While a USB data communication operation is in

progress

—While a Photo Stand operation is in progress

Setting the Clock

Use the procedures in this section to select a Home Time

Zone, and to change its date and time settings.

IMPORTANT!

•Make sure you select your Home Time zone (the

zone where you are currently located) before

changing the time and date settings. Otherwise, the

time and date setting will change automatically when

you select another time zone.

To select your Home Time zone

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “World Time”,

and then press [].

•This displays the current World Time zone.

Use [] and [] to select “Home”, and then

press [].

OTHER SETTINGS

124

Use [] and [] to select “City”, and then

press [].

Use [], [], [], and [] to select the

geographical area that contains location you

want to select as your Home Time zone, and

then press [SET].

Use [] and [] to select the city you want,

and then press [SET].

After selecting the city you want, press [SET]

to register its zone as your Home Time zone.

To set the current time and date

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “Adjust”, and

then press [].

Set the current date and the time.

Do this:

Press [] or [].

Press [] or [].

Press [DISP].

To do this:

Change the setting at the current

cursor location

Move the cursor between settings

Toggle between 12-hour and 24-

hour timekeeping

When all the settings are the way you want,

press [SET] to register them and exit the

setting screen.

OTHER SETTINGS

125

Changing the Date Format

You can select from among three different formats for

display of the date.

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “Date Style”,

and then press [].

Use [] and [] to change the setting, and

then press [SET].

Example: December 24, 2003

Select this format:

YY/MM/DD

DD/MM/YY

MM/DD/YY

To display the date like this:

03/12/24

24/12/03

12/24/03

Using World Time

You can use the World Time screen to view a time zone

that is different from the home time zone when you go on a

trip, etc. World Time can display the time in one of 162

cities in 32 time zones.

To display the World Time screen

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “World Time”,

and then press [].

•This displays the current World Time zone.

Use [] and [] to select “World”.

Press [SET] to exit the setting screen.

Select this:

Home

World

To do this:

Display the time in your home time zone

Display the time in a different time zone

OTHER SETTINGS

126

To configure World Time settings

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up”tab, select “World Time”,

and then press [].

•This displays the current World Time zone.

Use [] and [] to select “World”, and then

press [].

Use [] and [] to select “City”, and then

press [].

Use [], [], [], and

[] to select the

geographical area you

want, and then press

[SET].

Use [] and [] to

select the city you

want, and then press

[SET].

•This displays the current

time in the city you

select.

When the setting is the way you want, press

[SET] to apply it and exit the setting screen.

This manual suits for next models

Table of contents

Other Casio Digital Camera manuals

Casio

Casio QV-7000SX User manual

Casio

Casio Exilim EX-FR100 User manual

Casio

Casio QV-3500EX Installation and maintenance instructions

Casio

Casio Exilim EX-Z280 User manual

Casio

Casio EX-Z200RD - EXILIM ZOOM Digital Camera User manual

Casio

Casio QV-10A Troubleshooting guide

Casio

Casio QV-770 User manual

Casio

Casio EX S12 - EXILIM CARD Digital Camera User manual

Casio

Casio EXILIM K1191PCM1DMX User manual

Casio

Casio EXILIM EX-Z800 User manual

Casio

Casio EXILIM EX-Z350 User manual

Casio

Casio EX Z77 - EXILIM ZOOM Digital Camera User manual

Casio

Casio QV-5700 User manual

Casio

Casio E MULTI PJ CAMERA Multifunctional Camera... User manual

Casio

Casio QV-700 User manual

Casio

Casio QV-200B Troubleshooting guide

Casio

Casio QV-300 User manual

Casio

Casio Exilim EX-S100 Troubleshooting guide

Casio

Casio EXILIM EX-JE10 User manual

Casio

Casio Exilim EX-H10 User manual

Casio

Casio QV-7000SX User manual

Casio

Casio EX-TR600 User manual

Casio

Casio EX-Z200 - EXILIM Digital Camera User manual

Casio

Casio EX-FC150 - EXILIM Digital Camera User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions

Casio camera User manual

Popular Digital Camera manuals by other brands