Casio FX-9750GII - SOFTWARE VERSION 2-00 User manual
Resetting the CASIO fx-9750GII for testing purposes
1. From the Main Menu, highlight the SYSTEM icon
and press lor press j.
2. Press y(RSET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories, for
testing purposes.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press dwhen the calculator is complete.
6. To return to the Main Menu, press p.
Resetting the CASIO fx-9860GII for testing purposes
This will delete all RAM, Archive Memory, Programs, List and Spreadsheet Data
(resetting the calculator to factory default), which meets the reset requirements for
standardized testing.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RSET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press dwhen the calculator is complete.
6. To return to the Main Menu, press p.
To Disable Add-in Applications, if necessary:
This will disable the Geometry functionality.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select e(Add-In) to disable Add-In Applications.
Select r(STRGMEM) to delete storage memory
data.
Select y(A&S) to disable Add-In Applications
and delete storage memory data.
To Restore Add-in Applications, Programs and List and Spreadsheet Data:
1. Using an I/O unit-to-unit cable (which comes with the fx-9860GII models),
connect together the two graphing calculators- at least one of the two units
must be “temporarily disabled”.
2. On both calculators, from the Main Menu, highlight
the LINK icon and press lor press j.
3. Press r(CABLE) to select the type of cable.
4. Select w(3PIN) as the cable type.
5. On the receiving calculator, press w(RECV) to
set up the calculator to receive data.
The calculator is now ready to receive data.
6. On the sending calculator, press q(TRANSMIT) to
set up the calculator to transmit data.
Press q(MAIN) to send data from the Main
Memory.
Press q(SELECT) to select what data to send.
Press q(SELECT) to select specific data to send.
Press w(ALL) to select all data.
Once the data has been selected, press
u(TRANSMIT) to transmit the selected data.
Press q(Yes) to transmit the data.
Resetting the CASIO PRIZM/fx-CG10 for testing purposes
This will delete all RAM, Archive Memory, Programs, List and Spreadsheet Data
(resetting the calculator to factory default), which meets the reset requirements for
standardized testing.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press
dwhen the calculator is complete.
6. To return to the Main Menu, press p.
To Disable Add-in Applications, if necessary:
This will disable the Geometry and Picture Plot functionalities.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select e(Add-In) to disable Add-In Applications.
Select r(STRGMEM) to delete storage memory
data.
Select
y(A&S) to disable Add-In Applications
and delete storage memory data.
To Restore Add-in Applications, Programs and List and Spreadsheet Data:
1. Using an I/O unit-to-unit cable (which comes with the PRIZM/fx-CG10
models), connect together the two graphing calculators- at least one of the
two units must be “temporarily disabled”.
2. On both calculators, from the Main Menu, highlight
the LINK icon and press lor press j.
3. Press
r(CABLE) to select the type of cable.
4. Select
w(3PIN) as the cable type.
5. On the receiving calculator, press w(RECV) to
set up the calculator to receive data.
The calculator is now ready to receive data.
6. On the sending calculator, press q(TRANSMIT) to
set up the calculator to transmit data.
Press q(MAIN) to send data from the Main
Memory.
Press q(SELECT) to select what data to send.
Press q(SELECT) to select specific data to send.
Press w(ALL) to select all data.
Once the data has been selected, press
u(TRANSMIT) to transmit the selected data.
Press q(Yes) to transmit the data.
Other manuals for FX-9750GII - SOFTWARE VERSION 2-00
7
Table of contents
Other Casio Calculator manuals
Casio
Casio BF-100 User manual
Casio
Casio DR-120TM User manual
Casio
Casio CFX-9970G User manual
Casio
Casio DJ-120D plus User manual
Casio
Casio V.P.A.M. fx-992S User manual
Casio
Casio RM-9850GA PLUS User manual
Casio
Casio fx-991ZA Plus User manual
Casio
Casio fx-82EX Installation and operation manual
Casio
Casio FX-95 User manual
Casio
Casio FX-82D User manual
Casio
Casio fx-82CW User manual
Casio
Casio FX-CG20 User manual
Casio
Casio HR-170RC User manual
Casio
Casio ms-310m User manual
Casio
Casio MS-80BM User manual
Casio
Casio FX-9750G User manual
Casio
Casio fx-5500LA User manual
Casio
Casio fx-991ZA Plus User manual
Casio
Casio fx-570EX User manual
Casio
Casio fx-7500G User manual
