Canon PFI-101 User manual

This manual suits for next models

3

Table of contents

Other Canon Printer Accessories manuals

Canon

Canon BW Expansion Bus-C1 User manual

Canon

Canon STAPLER SORTER-L1/MS-C1 User manual

Canon

Canon Remote FAX Kit-A1 User manual

Canon

Canon CLT-500 User manual

Canon

Canon Two-Knife Booklet Trimmer-A1 User manual

Canon

Canon DADF-M1 User manual

Canon

Canon TU-06 User manual

Canon

Canon High Capacity Stacker-G1 User manual

Canon

Canon DADF-P1 User manual

Canon

Canon Puncher Unit-BF1 User manual

Canon

Canon IPF600 User manual

Canon

Canon Buffer Pass Unit-N1 User manual

Canon

Canon imagePROGRAF SD-21 User manual

Canon

Canon Finisher-R1 Service manual

Canon

Canon Voice Guidance Kit User manual

Canon

Canon AG1 User manual

Canon

Canon BW Voice Guidance Board-A1 User manual

Canon

Canon DADF-M1 User manual

Canon

Canon Finisher-U1 User manual

Canon

Canon imageFORMULA Flatbed Scanner Unit 102 User manual

Canon

Canon Finisher-R1 Operating and maintenance manual

Canon

Canon DADF-H1 User manual

Canon

Canon imageRUNNER ADVANCE 6065 User manual

Canon

Canon AK1 User manual

Popular Printer Accessories manuals by other brands

Star Micronics

Star Micronics TSP800 Series install guide

REA

REA JET HR pro 2K user manual

HP

HP Laserjet,Color Laserjet 4si user guide

oliser

oliser MS 45 instructions

Roland

Roland DU2-64 Supplementary manual

Xerox

Xerox EFI EXP6000 Specification sheet

Sharp

Sharp FO-1MK Service manual

Labelmate

Labelmate PM-300 user manual

Epson

Epson T6248 Product information sheet

Epson

Epson OT-BZ20 user manual

Ricoh

Ricoh LCIT RT5100 Field service manual

GBC

GBC 16 Series user guide

Develop

Develop SD-509 installation manual

Kyocera

Kyocera KM-6230 Instruction handbook

Triumph Adler

Triumph Adler DF-710 Instruction handbook

Citizen

Citizen CBM-202PC Series user manual

Codonics

Codonics Virtua 1VCX-LR833 Technical brief

TonerRefillKits

TonerRefillKits ReChargX RX126 instructions

instruction for Canon PFI-101/102/103/105

1. Conduct Part Check :

1.1). Lock for cover x 1

1.2) chip set holder x 1

1.3). chip set sliding plate x 1

1.4). ink refill hole plug x 1

2. After refill ink, insall the plug on the ink refill hole, the the ink will not flow out from the

cartridges

3. Install the chip set and chip set holder into cartridge as the picture show you as below.

Before intall the cartridge into the printer , please cancel the ink level detection in setup

button.

4. Install the chip set sliding plate, then it will fix the chip set holder as the picture.

5. it is easy to install cartridge into printer. Use the lock for cover in the right place as the

picture show as below.

Caution：Refill the ink when the ink lower because the ink level detection

have been cancel.

How to cancel the ink level detection function

1. When you install cartridge into printe and turn on the power switch, the printer screen will show

the information: Can not correctly detect the remaining ink amount, check the ink

cartridge. Please press right button one time.

2. the printer screen will show the information: please check: 1.check 2.information. please choose

“2 information”and press “OK”button.

3. the printer screen will show the information: Installed ink cartridge was exhausted. As the ink

remaining amount is unknown, so the printer to stop the action. Please press right

button one time.

4. the printer screen will show the information: If you want to continue printing, you need to cancel the

detection function of remaining ink level. Please press right button one time.

5. the printer screen will show the information: Cancel the function？1.no 2.yes. please choose “2 yes”and

press “OK”button.

6. the printer screen will show the information: Make sure the ink cartridge with ink, then cancel

the detection function of remaining ink level. Please press right button one time.

7. the printer screen will show the information: if supply the ink and occur fault, Canon is not

responsible for this. Please press right button one time.

8. the printer screen will show the information: cancel the detection function of remaining ink level.

Preservation of historical and then execute it? Please press right button one time.

9. the printer screen will show the information: YES OR NO? 1.NO 2.YES. please choose “2 yes”and press

“OK”button.

10. it is ok.