Canon BS1 User manual
4321
Puncher Unit-BS1
Service Manual
August 22, 2012
Revision 0
Product Outline
Technology
Parts Replacing and Cleaning
Installation
Application
This manual has been issued by Canon Inc. for qualied persons to learn technical theory,
installation, maintenance, and repair of products. This manual covers all localities where the
products are sold. For this reason, there may be information in this manual that does not
apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements
or changes in products. When changes occur in applicable products or in the contents of this
manual, Canon will release technical information as the need arises. In the event of major
changes in the contents of this manual over a long or short period, Canon will issue a new
edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks
of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
not be copied, reproduced or translated into another language, in whole or in part, without the
consent of Canon Inc.
© CANON INC. 2012
Caution
Use of this manual should be strictly supervised to avoid disclosure of condential
information.
Explanation of Symbols
The following symbols are used throughout this Service Manual.
Symbols Explanation Symbols Explanation
Check. Remove the claw.
Check visually. Insert the claw.
Check the noise. Use the bundled part.
Disconnect the connector. Push the part.
Connect the connector. Plug the power cable.
Remove the cable/wire
from the cable guide or wire
saddle.
Turn on the power.
Set the cable/wire to the
cable guide or wire saddle.
Remove the screw.
Tighten the screw.
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specic functions and the
relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams, represents the path of mechanical drive; where a signal
name accompanies the symbol, the arrow indicates the direction of the
electric signal.
The expression "turn on the power" means ipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine with
power.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is
"High", while '0' is used to indicate "Low". (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked
in the eld. Therefore, the operations of the microprocessors used in the machines
are not discussed: they are explained in terms of from sensors to the input of the DC
controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service
Manual and all relevant Service Information bulletins and be able to identify and isolate faults
in the machine.
0 Safety Precautions
Notes Before Servicing ------------------------------------------------------0-2
Points to Note at Cleaning --------------------------------------------------0-2
1 Product Outline
Specications ------------------------------------------------------------------1-2
Hole Locations ------------------------------------------------------------------------------- 1-2
Names of Parts ----------------------------------------------------------------1-3
Cross Section ----------------------------------------------------------------------- 1-3
2 Technology
Feed Drive System -----------------------------------------------------------2-2
Overview ----------------------------------------------------------------------------- 2-2
Moving the Paper ------------------------------------------------------------------ 2-3
Checking the Condition of the Punch Chip Case -------------------------- 2-4
3 Parts Replacing and Cleaning
Removing from the Host Machine ----------------------------------------3-2
Removing Punch Unit ------------------------------------------------------------- 3-2
Drive System -------------------------------------------------------------------3-4
Remove the punch unit ----------------------------------------------------------- 3-4
Preparations --------------------------------------------------------------------------------- 3-4
Procedure ------------------------------------------------------------------------------------- 3-4
4 Installation
How to check this Installation Procedure -------------------------------4-2
When Using the Parts included in the package ---------------------------- 4-2
Symbols in the Illustration ------------------------------------------------------- 4-2
Points to Note at Installation -----------------------------------------------4-2
Checking the Contents ------------------------------------------------------4-3
Check Items when Turning OFF the Main Power ---------------------4-3
Contents
Installation Procedure --------------------------------------------------------4-4
Adjustments --------------------------------------------------------------------4-9
Punching Operation Settings --------------------------------------------------- 4-9
Adjustment of Paper Stop Positiom. -----------------------------------------4-10
Afxing the Labels ---------------------------------------------------------- 4-11
0
0Safety Precautions
Safety Precautions
0-2
0-2
Safety Precautions > Points to Note at Cleaning
Safety Precautions > Points to Note at Cleaning
Notes Before Servicing
Caution:
At servicing, be sure to turn off the power source according to the specied steps and
disconnect the power plug.
Caution:
Do not turn off the power switch when downloading is under way.
Turning off the main power switch while downloading is under way can disable the
machine.
Points to Note at Cleaning
Caution:
When performing cleaning using organic solvent such as alcohol, be sure to check that
the component of solvent is vaporized completely before assembling.
1
1
1-2
1-2
Product Outline > Specications
Product Outline > Specications
Specications
Item Description Remarks
Punching
method
spin punch
Paper size 2/4 hole(Puncher Unit-BT1)
A3,B4,A4,A4R,B5,B5
indeterminate form
2 hole) 182 to 432 x 182 to 297
4 hole) 182 to 432 x 257 to 297
For FRA, "A" series paper size
only
2/3 hole(Puncher Unit-BS1)
LDR,LTR, LGL,LTRR,EXE
indeterminate form
2 hole) 182 to 432 x 182 to 297
3 hole) 182 to 432 x 240 to 297
4 hole(Puncher Unit-BU1)
A3,A4
indeterminate form
182 to 432 x 257 to 297
Paper weight 52g/m2 to 300g/m2Transparency and tracing paper
cannot be used.
* In the case of coated paper, 80
to 209 g/m2
Punch hole
diameter
2hole: 6.5 mm
2/3hole: 8 mm
4hole: 6.5 mm
Punch chip
case
equivalent of 6,000 sheets equivalent of 80 g/m2 paper
Dimensions 78mm x 655mm x 131xmm (WxDxH)
Weight 3 kg (approx.)
Power supply 24/5 VDC from nisher
T-1-1
■Hole Locations
[3] Puncher Unit-BT1 (2/4穴(FR))
80±1mm
L1
12±1mm
A4 / A3 : 108.5±1mm
B4 / B5 : 88.5±1mm
A4R : 65±1mm
B5R : 51±1mm
[2] Puncher Unit-BS1 (2/3穴)
69.85±1mm
L1
12±1mm
LGL / LTRR : 73±1mm
108±1mm 108±1mm
L1
12±1mm
LTR / 11”x17” : 31.5±1mm
[1] Puncher Unit-BU1 (4穴)
70±1mm21±1mm 21±1mm
L1
12±1mm
A4 / A3 : 92.5±1mm
80±1mm80±1mm 80±1mm
L1
12±1mm
A4 / A3 : 28.5±1mm
F-1-1
1
1
1-3
1-3
Product Outline > Names of Parts > Cross Section
Product Outline > Names of Parts > Cross Section
Names of Parts
Cross Section
[1]
[2]
[3]
[4]
[5]
[1] Punch Motor
[2] Punch chip case full sensor
[3] Punch chip case
[4] Stopper
[5] Pin
F-1-2
Table of contents
Other Canon Printer Accessories manuals
Canon
Canon Super G3 2nd Line FAX Board-AM1 User manual
Canon
Canon Finisher-R1 Service manual
Canon
Canon High Capacity Stacker-G1 User manual
Canon
Canon Super G3 Fax Board-J1 User manual
Canon
Canon NP6218 How to use
Canon
Canon Color Network Multi-PDL Printer Kit-C1 User manual
Canon
Canon INNER 2-WAY TRAY-E1 Operating and maintenance manual
Canon
Canon BW Remote Operators Software Kit-A1 Operating and maintenance manual
Canon
Canon Finisher-Q1 User manual
Canon
Canon Enhanced Color Copy 216GSM Quick reference guide
Canon
Canon 148GSM C2S User manual
Canon
Canon Additional Finisher Tray-C1 User manual
Canon
Canon Additional Finisher Tray-C1 Operating and maintenance manual
Canon
Canon imageFORMULA Flatbed Scanner Unit 102 User manual
Canon
Canon iP4000 - PIXMA Photo Printer User manual
Canon
Canon Decurler Unit-C1 User manual
Canon
Canon CLI-521BK User manual
Canon
Canon DADF-M1 Service manual
Canon
Canon Cassette Feeding Module-K1 User manual
Canon
Canon Duplex Unit-A1 User manual
