Camos CS-110 User manual
INSTRUCTION MANUAL
※ Design and specifications could be changed without notices.
ver. 1.0 PRINTED IN KOREA
CS-110
SIDE-VIEW FOR VEHICLE
Thank you for purchasing this product.
For proper usages and application,
Please read this instruction manual thoroughly.
3
CONTENTS
Safety Rules
1. Features
2. Box Contents
3. Installation
4. Connection
5. Cleaning & General maintenance
6. Specifications
..................................................................................... 4
........................................................................................ 5
.............................................................................. 5
.................................................................................. 6
................................................................................. 8
...................................... 9
............................................................................. 9
4
SAFTY RULES
Please pay attention to the warnings and cautions below in order to prevent potential
risks.
“WARNING” and “CAUTION” symbols are divided according to the different
risk levels.
CAUTION
WARNING
May cause damage or shorten usage time of the pro-
duct if the user ignores the cautions in the safety rules.
May cause bodily harm or even death if the user ignores
the warnings in the safety rules.
WARNING
In case that the power cable cord touches a metal case, cover it with a friction
tape.
- Short circuit or disconnection of wire may cause a re or accident.
Let professional engineers or the sale store install the camera.
- It requires the experience and skills of professional engineers for proper
installation and wiring.
After installing the camera, check if the break lamp, head lamp and wipe work
properly.
The camera has to be installed with DC 12V to the vehicle.
CAUTION
Do not disassemble the device.
- It may cause a re or malfunction of the device.
Do not use bolts or nuts from parts of the vehicle.
- Using bolt or nuts from steering column or break may cause an accident.
Do not let the extension cable pass through the seat rail. Wire the cables properly.
- It may cause a re or an accident.
Do not install the camera bracket on glass surface.
- Use screws for the installation of the camera bracket.
5
(LENS)
■ 1/4” IT COLOR CCD image sensor
■ Zn die-casting body
■ Compact size
■ Waterproof (IP-67)
(HOUSING)
■ PC-BODY application
■ Simple assemblling with hook.
1FEATURES
2BOX CONTENTS
Camera Bracket Set
Camera
Instruction
Manual
Bottom Rubber
Extension Cable
15ft (4.6m)
Screws set
6
3INSTALLATION
(1) Verify the position of ‘TOP’
which should be upper side
and fix it to the lens bracket
with screws.
(2) Then install it to the bottom
bracket.
(3) Select and clean the position for the camera
installation.
(4) Fix the pre-installed camera
using the rubber packing and
screws.
(5) Then cover it with the camera housing like the
picture.
※ Based on the condition and place, the installation procedures
could be varied.
7
When install CS-110 camera, place “TOP” face to upside.
TOP
R L
1:1 size
⑤
⑥
⑦
⑧
MACHINE SCREW M3.0 X 4 (1ea)
TAPPING SCREW T2 M3.0 X 6 (2ea)
TAPPING SCREW T1 M3.0 X 12 (2ea)
8
4CONNECTION
CS-110
CAMERA CONNECTOR
1. POWER IN (DC +12V)
2. N.C
3. N.C
4. VIDEO OUT
5. N.C
6. N.C
7. GND
Monitor
(Option)
Extension Cable
15ft (4.6m)
Side Camera
Before making the connection, disconnect the ground terminal of the car battery
to avoid short circuiting.
Before inserting plug, should check pin specification and the plug should insert
to jack or connector firmly.
If forced insert wrong direction, it may cause malfunction.
When connect extension cable, turn it right direction as described arrow.
9
5CLEANING & GENERAL MAINTENANCE
6SPECIFICATION
※ If your vehicle has been parked in direct sun light resulting in a considerable
rise in temperature inside the vehicle, allow the unit to cool off before
operating.
CLEANING
Unplug or power off mode before cleaning. Do not use liquid cleaners or
aerosol ceaners. Use a damp cloth for cleaning.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this monitor equipment through
holes as they may touch dangerous voltage points or short-out parts that
could result in a fire of electric shock. Never spill liquid of any kind on the
product.
SERVICING
Do not attempt to service this system by yourself as opening or removing
covers may eapose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Operating temperature
-4℉to 122℉ / -20℃to 50℃
0.18lb (79.5g)
Minimum illumination
1Lux
Image device (NTSC/PAL)
1/4” IT COLOR CCD Image Sensor
View of angle (H/V/D)
71/47/74 deg
Input Voltage
DC 5V~15V/100mA max @ 12V
Camera Weight
Demension
2.44(W) x 1.18(H) x 1.57(D) inch
62(W) x 30(H) x 40(D) mm
Bottom Rubber ---------------------------------------- 1
Accessories
Screws set ------------------------------------------------ 1
Extension Cable --------------------------------------- 1
Table of contents
Other Camos Dashcam manuals
