Cameo STUDIO PAR TW User manual

STUDIO PAR TW

LED PAR SPOTLIGHT WITH 12 X 3-IN-1 TUNABLE WHITE LED

CLPSTTWG2

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

NOTES FOR MOBILE INDOOR DEVICES 10

INCLUDED 10

INTRODUCTION 10

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 11

OPERATION 13

SETUP AND INSTALLATION 21

MOUNTING THE FILTER FRAME 23

CARE, MAINTENANCE AND REPAIR 23

TECHNICAL DATA 25

MINIMUM DISTANCE TO ILLUMINATED SURFACE 26

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 26

DISPOSAL 27

MANUFACTURER’S DECLARATIONS 27

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 29

BESTIMMUNGSGEMÄSSER GEBRAUCH 29

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 29

SICHERHEITSHINWEISE 30

HINWEISE FÜR ORTSVERÄNDERLICHE INDOOR-GERÄTE 33

LIEFERUMFANG 33

EINFÜHRUNG 34

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 35

BEDIENUNG 37

AUFSTELLUNG UND MONTAGE 46

FILTERRAHMEN MONTIEREN 47

PFLEGE, WARTUNG UND REPARATUR 48

TECHNISCHE DATEN 49

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 50

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 50

ENTSORGUNG 51

HERSTELLERERKLÄRUNGEN 52

FRANÇAIS

INFORMATIONS CONCERNANT CE MANUEL D’UTILISATION 53

UTILISATION CONFORME 53

EXPLICATIONS DES TERMES ET DES SYMBOLES 53

CONSIGNES DE SÉCURITÉ 54

REMARQUES CONCERNANT LES APPAREILS D’INTÉRIEUR MOBILES 58

CONTENU DE LA LIVRAISON 58

INTRODUCTION 58

RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET D’AFFICHAGE 59

UTILISATION 61

INSTALLATION ET MONTAGE 70

MONTAGE DU CADRE DE FILTRE 71

ENTRETIEN, MAINTENANCE ET RÉPARATION 72

CARACTÉRISTIQUES TECHNIQUES 73

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 74

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT

INFLAMMABLES 74

ÉLIMINATION 75

DÉCLARATIONS DU FABRICANT 76

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE INSTRUCCIONES 77

USO PREVISTO 77

TÉRMINOS Y SÍMBOLOS 77

INSTRUCCIONES DE SEGURIDAD 78

INDICACIONES PARA EQUIPOS PORTÁTILES DE INTERIOR 82

VOLUMEN DE SUMINISTRO 82

INTRODUCCIÓN 82

CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS DE VISUALIZACIÓN 83

MANEJO 85

INSTALACIÓN Y MONTAJE 94

MONTAJE DEL PORTAFILTROS 95

CUIDADO, MANTENIMIENTO Y REPARACIÓN 96

DATOS TÉCNICOS 97

ELIMINACIÓN 98

DISTANCIA MÍNIMA CON RESPECTO A LA SUPERFICIE ILUMINADA 98

DISTANCIA MÍNIMA CON RESPECTO A MATERIALES NORMALMENTE INFLAMABLES 98

DECLARACIONES DEL FABRICANTE 99

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI 100

UŻYTKOWANIE ZGODNE Z PRZEZNACZENIEM 100

OBJAŚNIENIA TERMINÓW I SYMBOLI 100

ZASADY BEZPIECZEŃSTWA 101

UWAGI DOTYCZĄCE PRZENOŚNEGO SPRZĘTU DO STOSOWANIA W

POMIESZCZENIACH 104

ZAKRES DOSTAWY 104

WPROWADZENIE 105

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 106

OBSŁUGA 108

USTAWIANIE I MONTAŻ 117

MONTAŻ RAMY FILTRA 118

CZYSZCZENIE, KONSERWACJA I NAPRAWY 119

DANE TECHNICZNE 120

MINIMALNA ODLEGŁOŚĆ OD POWIERZCHNI OŚWIETLANEJ 121

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 121

UTYLIZACJA 121

OŚWIADCZENIA PRODUCENTA 122

ITALIANO

INFORMAZIONI SUL PRESENTE MANUALE D'USO 123

UTILIZZO CONFORME 123

SPIEGAZIONE DI CONCETTI E SIMBOLI 123

INDICAZIONI SULLA SICUREZZA 124

AVVERTENZE PER DISPOSITIVI INDUSTRIALI PORTATILI 127

FORNITURA 127

INTRODUZIONE 127

CONNETTORI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 128

UTILIZZO 130

INSTALLAZIONE E MONTAGGIO 139

INSTALLAZIONE DEL PORTAFILTRO 140

PULIZIA, MANUTENZIONE E RIPARAZIONE 141

DATI TECNICI 142

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 143

DISTANZA MINIMA DAI MATERIALI NORMALMENTE INFIAMMABILI 143

SMALTIMENTO 143

DICHIARAZIONI DEL PRODUTTORE 144

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX /

STEROWANIE DMX / CONTROLLO DMX 146

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is avail-

able on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is an

integral part of the product.

INTENDED USE

The product is a device for event technology!

This product has been developed for professional use in the ﬁeld of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualiﬁed users with specialist knowledge of event

technology!

Use of the product outside the speciﬁed technical data and operating conditions is considered

inappropriate!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. HAZARD: The word HAZARD, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, indicates situations or

conditions that could result in injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, indicates situations

or conditions that could result in damage to property and/or the environment.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open the device and do not perform any modiﬁcations.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and unplug it from

the power source. The device may be repaired only by authorised repair techni-

cians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the device's power cable is damaged, the device may not be used.

4. Permanently connected power cables may only be replaced by a qualiﬁed person.

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ATTENTION:

1. Do not switch on the device if it has been exposed to extreme temperature ﬂuctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached room temperature.

2. Ensure that the voltage and frequency of the mains supply match the values spec-

iﬁed on the device. If the device has a voltage selector switch, do not connect the

device until it has been set correctly. Use only suitable power cables.

3. To disconnect the device from the mains on all poles, it is not sufﬁcient to press the

on/off switch on the device.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning

strikes).

6. Observe the speciﬁed maximum output current on devices with a Power Out con-

nection. Ensure that the total current consumption of all connected devices does

not exceed the speciﬁed value.

7. Replace plug-in power cables with original cables only.

HAZARD:

1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons

(including children) with reduced physical, sensory or mental capabilities.

2. Risk of falling! Make sure that the device is securely installed and will not fall

down. Only use suitable stands or mounts (particularly for ﬁxed installations).

Ensure that accessories are properly installed and secured. Ensure that applicable

safety regulations are observed.

WARNING:

1. Use the device in the prescribed manner only.

2. Operate the device using only accessories of the type recommended and supplied

by the manufacturer.

3. Observe safety regulations applicable in your country during installation.

4. After connecting the device, ensure that all cables are routed so as to avoid dam-

age or accidents, such as from tripping.

5. Always observe the speciﬁed minimum distance to normally ﬂammable materials!

Unless explicitly stated, the minimum distance is 0.3m.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

CAUTION:

1. Moving components such as mounting brackets may become jammed.

2. In the case of devices with motor-driven components, there is a risk of injury due

to the movement of the device. Sudden movement of the device can cause shock

reactions.

ATTENTION:

1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or

other heat sources. Ensure that the device is always installed in such a way that it

is sufﬁciently cooled and cannot overheat.

2. Do not place any ignition sources, such as burning candles, near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. For transport, use the original packaging or packaging provided by the manufactur-

er.

5. Avoid any impacts to or shaking of the device.

6. Observe the IP rating and the ambient conditions such as temperature and humidi-

ty according to the speciﬁcations.

7. Devices can be continuously further developed. In the event of deviating informa-

tion on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always has

priority.

8. The device is not suitable for tropical climate zones or for operation over 2,000m

above sea level.

9. Unless explicitly stated, the device is not suitable for operation under marine

conditions.

PLEASE NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

NOTES FOR MOBILE INDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed for temporary

operation.

2. Continuous operation or permanent installation can impair the functioning of the

device and cause premature ageing.

INCLUDED

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

Product includes:

X1x STUDIO PAR TW G2 spotlight

X1x power cable

XUser manual

INTRODUCTION

12 X 10 W WARM WHITE / COLD WHITE / AMBER LED STUDIO PAR G2 SPOTLIGHT

CLPSTTWG2

CONTROL FUNCTIONS:

1-channel DIM, D5-channel 8 bit, 2-channel CCT, 3-channel 8 bit, D4-channel strobe CCT,

8-channel 16 bit and 11-channel full access DMX control

Master / slave operation

Standalone functions

W-DMX connection via optional iDMX stick

FEATURES:

3-pin DMX connections. Power Twist mains connections IN and OUT. OLED display.

PWM frequency adjustable. Connection for iDMX stick. Installation double bracket included. Oper-

ating voltage 100-240 V AC.

The spotlight features the RDM standard (Remote Device Management). Remote device manage-

ment allows the user to view the status and conﬁguration of RDM terminals via an RDM-capable

controller.

This manual suits for next models

Table of contents

Languages:

Other Cameo Lighting Equipment manuals

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions