CAME QBESetUp Owner's manual

Application for programming

radio and Wi-Fi devices

QBESetUp

PROGRAMMING MANUAL

English

FA01251-EN

Single network conﬁguration Wi-Fi

Dual network conﬁguration LAN or LAN/Wi-Fi

1 2 3

Single network conﬁguration Wi-Fi

Dual network conﬁguration LAN or LAN/Wi-Fi

1 2 3

Page2- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Double network conﬁguration (LAN or LAN / Wi-Fi)

Single network conﬁguration (Wi-Fi)

1 - Connect the device to your PC (router, switch) using the Ethernet cable supplied, access the web page of

the device, conﬁgure the LAN and the Wi-Fi network.

2 - Use the "QBESetUp" application to conﬁgure the system.

3 - Use the "QBE User" application to access the system.

4 - Register the device to CAMEConnect.

1 - Use the "QBESetUp" application to conﬁgure the system.

2 - Use the "QBE User" application to access the system and conﬁgure the Wi-Fi network.

3 - Register the device to CAMEConnect.

SETTING THE DEVICE NETWORK PARAMETERS

The network parameters can be set from the conﬁguration web page or through the user APP.

The device leaves the factory with the following network conﬁguration:

- IP address on LAN: 192.168.1.80

- WiFi address: 192.168.9.1 (in Access Point mode with name "QBE_0x73xxxx")

Page3- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Establishing connection to QBE

1 - Press the button to start the search for available

on-line devices

4 - Choose the device you want to connect to.

5 - If the device cannot be directly reached it is

possible to manually enter the IP address.

Main Homepage commands

1 - It allows connection to an available QBE (ON-

LINE)

2 - It opens an installation previously created and

saved on the device (OFF-LINE)

3 - It allows access to the conﬁguration pages of a

new system without necessarily being connected

to the network (OFF-LINE).

APP USE

Launch the application.

Page4- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Work area description

1 - It saves the system

2 - It opens a previously saved system structure

3 - It allows access to the system map view conﬁg-

uration

4 - It ﬁlters the system structure view

5 - It allows to share the system structure

6 - It shows the icon representing the QBE in the

middle of the work area

7 - It removes all devices connected to QBE

8 - It opens the section dedicated to diagnostics

9 - It view the list of active services

10 - It allows to return to the main software page

11 - Icon representing the QBE.

Creating a new system

Page5- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

2 - It allows access to the search screen of the

home automation modules available on-line.

1 - It allows access to the connected devices search

functions.

Adding home automation modules to the system structure (on-line mode)

Accessing the QBE functions menu

Functions menu commands

Press and hold the icon representing QBE until the

function menu appears.

1 - Name assigned to the device.

2 - It adds a device to the system structure

3 - It allows access the to the device's conﬁguration

options.

4 - It opens a list of the modules to which the device

can connect

5 - Program the device

6 - It allows access to the connected devices search

functions.

Icon on Green background = Device connected

Icon on Blue background = Device not connected

Icon on Orange background = Programming in

progress

Icon on Red background = Programming failed

Icon on Violet background = Unreachable device

Page6- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Manual search for connected devices

4 - Press the button to put the QBE device in

standby mode

Press the "SERVICE" button of the home automation

module to be added to the system.

The ID service of the device is sent to QBE.

The device is added to the system structure.

For OH/2O16WL modules it will be possible to

choose whether the module must be used for the

automation of shutters or with free exits.

Automatic search for connected devices

3 - It performs a network scan and compiles a list of

detected devices

Press the "+" button to insert the devices in the

structure.

C D

Page7- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Select the type of device to be added to the system

structure.

Select the type of devices required.

1 - It adds a device to the system structure.

Adding home automation modules to the system structure (o-line mode)

Page8- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Press the button that allows to add inputs or outputs

to the module.

Select the input/output to be added to the system

structure.

Adding inputs/outputs to the module

Press and hold the icon representing the connected

module until the function menu appears.

Functions menu commands

1 - It allows to add inputs or outputs to the module

2 - It allows to conﬁgure the module general

parameters

3 - It allows to manage the connections to the

module inputs and outputs

4 - It removes the module from the system structure

5 - It starts programming the module only

6 - It starts the programming of the module and of

the inputs/outputs connected to it

7 - It allows to assign a serial number (ID) to the

module choosing it from those available.

Accessing the functions menu of a connected module

Page9- Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Creating connections between the module

inputs and outputs

Press and hold the icon representing the output

1 - Press the button and choose, among those avail-

able, the input to be connected to the output.

The connection between the module inputs and

outputs can also be made by dragging the button

icon (input) above the light icon (exit) that it has to

command.

Repeat the operation to connect additional inputs to

the output.

Work area description

Icon on Green background = Device connected

Icon on Blue background = Device not programmed

Icon on Orange background = Programming in

progress

Icon on Red background = Programming failed

Icon on Violet background = Unreachable device

Blue dotted line = Radio connection

Green dashed line = Logical connection

Black continuous line = Wired connection

Page10 - Manual FA01251-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions

Conﬁguration window description

2 - Touch the area to manually enter the module

serial number.

3 - Touch the area to edit the module's name.