C-me EasyTel One User manual
Thank you for choosing CME.
This simplified universal remote control contains
all the main functions of most TV remote controls
of the brands listed on the back.
Before programming and using the remote control,
fit the batteries.
Keep your Instructions and Code Booklet for future reference.
USING THE KEYS AND FUNCTIONS
FITTING THE BATTERIES
Before programming and using the
remote control, fit the batteries.
The remote control requires 2 new
AAA/LR03 alkaline batteries.
Insert the batteries as shown.
•The batteries must be changed once a year.
•Change the batteries if the light indicator starts to flash
during use. The batteries are low.
•When you remove the batteries, fit the new ones within 5
minutes or you may have to reprogram your remote
control.
•Make a note of the code for your TV on the adhesive label
supplied inside the battery cover. This note will be handy if
you have to reprogram your remote control.
GB
6
Light indicator.
P+ to select the next
program or to turn
ON your TV. ON/OFF to turn OFF
your TV and, in some
cases, to turn ON
your TV.
Control the volume
using +/ -.
P- to select the
previous program.
Mute key.
Number key.
Teletext keys:
to access Teletext
close Teletext
and return to normal
viewing
Teletext page
hold function.
To select an external
terminal.
Identify and take note of the TV code which you have
searched for following the code noting procedure
(see “PROGRAMMED CODE NOTING” section).
1.Make sure that your TV is
ON.
2.In the Code Book, look for
your TV brand and make a
note of the corresponding
TV code indicated to the
side (e.g. Philips 001). If
your TV brand is not
listed, apply the global
search described in
paragraph B.
3.Hold down the and
number keys together
until the light indicator at
the top starts to flash
indicating that the remote
control is programming.
4.Release the keys, Within
15 seconds, enter the
brand code previously
identified (e.g. 001). The
light indicator flashes
more quickly to indicate
that the remote control is
ready for the search.
5.Point the remote control
at the TV. Press and
release the key slowly
several times. Stop when
your TV goes OFF (you
may have to press the
key dozens of times).
6.When your TV is OFF,
press the and keys
at the same time to
confirm.
Three long flashes
indicate that the operation
has been completed
correctly.
Additional check
Check that some of the
other functions used on your
original remote control are
working correctly. If the
commands function
incorrectly or erratically, you
have probably entered a
code for a similar but
different remote control. In
this case, repeat the search
procedure from point 3.
BRAND SEARCH PROGRAMMING MODE
A
SET-UP
Read these instructions carefully before programming
your remote control!
To command your appliances, you must program your
Easytel one as described in
paragraphs Aor Bbelow.
Visit out Internet site www.cme.it for interactive instructions
for easy and fast remote control programming.
NOTE: during the search operation, the light indicator flashes
more quickly. The light indicator stops flashing and the
remote control leaves the programming mode in the following
cases:
•if no keys are pressed for 12 seconds
•if the code search list is completed. In this case, switch to
programming mode B
7
Identify and take note of the code which you have searched
for following the code noting procedure
(see “PROGRAMMED CODE NOTING” section).
NOTE: during the search operation, the light indicator flashes
more quickly. The light indicator stops flashing and the
remote control leaves the programming mode in the following
cases:
•if no keys are pressed for 12 seconds.
•if the code search list is completed. In this case, visit
www.cme.it
This operation may take up to an hour.
1.Make sure that the TV is
ON.
2.Hold down the and
number keys together
until the light indicator at
the top starts to flash
indicating that the remote
control is programming.
3.Release the keys. Within
15 seconds, enter the
code 000.
The light indicator flashes
more quickly to indicate
that the remote control is
ready for the search.
4. Point the remote control
at the TV. Press and
release the key slowly
several times. Stop when
your TV goes OFF (you
may have to press the
key over a hundred times).
5. When your TV is OFF,
press the and
keys at the same time to
confirm. Three long
flashes indicate that the
operation has been
completed correctly.
Additional check
Check that some of the
other functions used on your
original remote control are
working correctly.
If the commands function
incorrectly or erratically, you
have probably entered a
code for a similar but
different remote control.
In this case, repeat the
search procedure from
point 2.
GLOBAL SEARCH REMOTE CONTROL
PROGRAMMING
B
8
Always write down the 3-digit code for your remote
control on the label inside the battery cover after
running the search and saving the code.
This may be useful if you need to reprogram your
remote control in the event of accidental cancellation or
when you change used batteries.
To find the code for your remote control:
PROGRAMMED CODE NOTING
1.Hold down the and number keys until the light
indicator at the top starts to flash.
2. Release the and keys and then press the
key.
3. After a few seconds, the light indicator communicates
the code you are looking for by flashing the three
numbers separately. Count the number of flashes for
each code number. For example, for the code 306, the
key flashes three, zero and six times to give:
= 3
= 0
= 6
4.Note this code on the label inside the battery cover, for
rapid consultation.
1.Hold down the and number keys together until
the light indicator at the top starts to flash indicating
that the remote control is programming.
2.Release the and keys and press the number
key briefly. Then enter the code you noted down
previously. Three flashes indicate that the code has
been saved correctly. If not, try the code entry
procedure again from point 1.
RE-PROGRAMMING YOUR REMOTE CONTROL
BY ENTERING THE CODE NOTED DOWN
9
TROUBLESHOOTING
PROBLEM
The TV does not respond
and the light indicator does
not light up when you press
a key.
The TV or VCR does not
respond but the light
indicator does light up.
The TV does not respond
and the light indicator
flashes.
The remote control
commands are not all
working correcting.
The code for your TV brand
is not in the Code Book.
SOLUTION
Check that the batteries are
fitted correctly. If necessary,
replace them with 2 new 1.5 V
AAA/LR03 alkaline batteries.
Check that the batteries are
new and that the remote
control is pointing at the
appliance without any
obstacles in the way. If
required, reset the remote
control code, following the
programming procedure A
or B.
The batteries are low. Change
them.
You may have used the wrong
code. Reset the remote
control code, following the
programming procedure A
or B .
Set the remote control code,
following the global search
programming procedure B.
WARRANTY: 2 years
The warranty ceases to be valid if the product is
tampered with or used incorrectly.
Remote control model Easytel one
Purchase date
If you have any queries about Easytel one:
•read this booklet carefully– this will help you to solve
almost all problems
•consult our Internet site www.cme.it to answer all
your queries more easily and quickly.
Agent's stamp
INFO LINE
10
Table of contents
Other C-me Remote Control manuals
